Panasonic PV-IQ425 Owner's manual

Brand: Panasonic

Model: PV-IQ425

Category: Camcorders

Type: Owner's manual

This manual is also suitable for

Panasonic

PalmcoPdcp IQ _

Camcorder

Operating Instructions

PV-IQ225fPV-IQ325

PV-IQ425/PV-IQ525

Beforeattemptingtoconnect,operateor adjustthisproduct,pleasereadthesetnstrudlor_§_horoughl_.

Spanish Quick Use Guide is included.

Guia para r&pida consulta en espafiol est& incluida.

VQTW0553 _)

Thank you for choosing Panasouic!

You have purchased one ofthe most

sophisticatedand reliable productson the

market today. Used properly, we're sure it

willbring you and your family years of

enjoyment. Please take time tofill inthe

informationat right. The serial number ison

the tag located onthe underside ofyour

Palmcorder. Be sure to retain this manual

as your convenient Palmcorder information

source.

Date of Purchase

Dealer Purchased From

Dealer Address

Dealer Phone No.

Model No.

Serial No.

These accessories are provided =norder to set up or use your Palmcorder.

1pc. AC Adaptor

(PV-A16)

1 pc. Battery Pack

(PV-BP18)

1 pc. AudioNideo

Cable (VJAW0026)

1 pc. Shoulder Strap

(VYCW0071 )

1 pc. VHS PlayPak

(PV-PINYMW0009)

and one "AA" battery

1 pc.8-Function Remote (VSQW0009)

with one CR2025 Battery

(with PV-IQ325/PV-IQ425/PV-IQ525)

Remote has been loaded with battery and

comes stored in Palmcorder. See page 21.

1 pc. CR2025 Clock

Battery (VSBW0004)

(installed in Palmcorder)

WARNING: TO PREVENT FiRE OR SHOCK HAZARD, DO NOT E_XPOS_ THIS

EQUIPMENT TO RAIN OR MOISTURE.

Your Compact VHS Palmcorder is designed to record

and play back in Standard Play (SP) and Super Long

Play (SLP) modes. You can also play a Compact VHS

Pa_mcor_er reP-,ord\ng on ",]o_r V_S k/CP, usln 9 the

VHS PlayPak supplied

CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This Palmcorder is equipped with the HQ System to

provide excellent video pictures, and =scompahble

with standard VHS equipment.

|t is recommended that only cassette tapes that have

been tested and inspected for use in VCF_ mach_r_es

with the _ and/or _ mark be used.

Th_s symbol warns the user that

umnsulated voltage within the unit may

have suffic=ent magnitude to cause electric

shock Therefore, it is dangerous to make

any kind of contact with any inside part of

this unit.

Thissymbolalertstheuserthatimportant

literature concerning the operation and

maintenance of this unit has been included

Therefore, it should be read carefully tn

order to avoid any problems.

1. Read Instructions -- All the salety and operating

instructions should be read before the umt _s

operated.

2. Retain Instructions - The safety and operahng

instructions should be retained for future reference

3. Heed Warnings -- All warnings on the unit and in

the operating instructions should be adhered to.

4. Follow Instructions -- All operating and

maintenance instructions should be followed.

5. Cleaning -- Unplug this video unit from the wall

outlet before cleaning. Do not use liquid or aerosol

cleaners. Use e dry cloth for cleaning.

6. Attachments -- Do not use attachments not

recommended by the video product manufacturer

as they may be hazardous.

7. Water and Moisture -- Do not use this video unit

near water -- for example near a bath tub, wash

bowl, kitchen sink, or laundry tub, in a wet

basement, or near a swimming pool, and the like.

8. Accessories -- Do not place this video unit on an

unstable cart, stand, tripod, bracket, or table. The

video unit may fall, causing serious injury to a child

or adult, and serious damage to the unit. Use only

with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the

video unit. Any mounting of the unit should follow

the manufacturer's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and

cart combination should be moved

with care. Quick stops, excessive

force, and uneven surfaces may

cause the appliance and ca,"*

combination to overturn.

9. Ventilation -- Slots and openings In the cabinet are

provided for ventilation and to ensure reliable

operation of the video unit and to protect it from

overheating These openings must not be blocked

or covered. Never place the video unit on a bed,

sofa, rug, or other similar surface, or near or over a

radiator or heat register. This video unit should not

be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is

provided or the manufacturer's instructions have

been adhered to.

10. Power Sources -- This video unit should be

operated only from the type of power source

indicated on the marking label. If you are not sure

of the type of power supply to your home, consult

your appliance dealer or local power company. For

video units intended to be operated from battery

power, or other sources, refer to the operating

instructions.

| i Gruund=ng of Polartzat_on -- Th=svideo unit may

be equipped with either a polanzed 2-wire AC

(Alternating Current) line plug (a plug having one

blade wider than the other) or 3-wire grounding

type plug, a plug having a third (grounding) pin.

The 2-wire polarized plug wUl fit into the power

outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug still fails to fit, contact

your electr=cian to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

The 3-wire grounding type plug will fit into a

grounding type power outlet. This is a safety

feature. If you are unable to insert the plug into the

outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of

the grounding type plug.

12. Power-Cord Protection -- Power-supply cords

should be routed so that they are not likely to be

walked on or pinched by items placed upon or

against them, paying particular attenhon to cords of

plugs, convenience receptacles, and the point

where they exit from the unit.

13. Outdoor Antenna Grounding - If an oufsld'e

antenna or cable system is connected to the video

unit, be sure the antenna or cable system is

grounded so as to provide some protection against

voltage surges and built-up static charges Part 1 of

the Canadian Electrical Code, in USA Section 810

of the National Electncal Code, provides

information with respect to proper grounding of the

mast and supporting structure, grounding of the

lead-in wire to an antenna d=scharge unit, size of

grounding conductors, location of antenna

discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode.

ANTENNA

m"'_ LEAD IN

WIRE

ER SERVICE GI_OUNOING

ELECTRODE SYSTEM

NEC- NATIONAL EUECTRICALCODE (NECART250 PART H)

14. Lightning -- For added protection of this video unit

receiver during a hghtning storm, or when it is left

unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage

to the video unit due to lightning and power-hne

surges.

15. Power Lines -- An outside antenna system should

not be located in the vicinity of overhead power

lines or other electric light or power circuits, or

where it can fall into such power lines or circuits.

When installing an outside antenna system,

extreme care should be taken to keep from

touching such power lines or circuits as contact

with them might be fetel.

16. Overloading -- Do not overload wall outlets and

extension cords as this can result in a risk of fire or

electric shock.

17. Objects and Liquids -- Never push objects of any

kind into this video unit through openings as they

may touch dangerous voltage points or short out

perts that could result in a fire or electric shock.

Never spill liquid of any kind onto the video unit.

18. Servicing -- Do not attempt to service this video

unit yourself as opening or removing covers may

expose you to dangerous voltage or other hazards,

Refer ell servicing to qualified service personnel.

19. Damage Requiring Service -- Unplug this video

unit from the wall outlet end refer servicing to

qualified service personnel under the following

conditions:

a. When the power-supply cord or plug is

damaged,

b. If any liquid has been spilled onto, or objects

have fellen into the video unit.

c. If the video unit has been exposed to rain or

water.

d. If the video unit does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions, as an improper adjustment of other

controls may result in damage and will often

require extensive work by e quelified technicien

to restore the video unit to its normel operetion.

e. If the video unit has been dropped or the cabinet

has been damaged.

f. When the video unit exhibits e distinct change in

performance -- this indicates a need for service.

20. Replacement Perts -- When replacement parts are

required, be sure the service technician has used

replacement parts specified by the manufacturer or

have the same characteristics es the original part.

Unauthorized substitutions may result in fire,

electric shock or other hazards.

21. Safety Check-- Upon completion of any service or

repairs to this video unit, ask the service technician

to perform safety checks to determine that the

video unit is in safe operating order.

USE & LOCATION

• TO AVOID SHOCK HAZARD ... Your Camcorder and power eul_y should not be exposed to rain or moisture.

Do not connect the power supply or operate your Camcorder If it gets wet. Your Camcorder has been designed

for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a

direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of

your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug

your Camcorder from the power supply before cleaning.

• DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS

• DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, In direct sunlight,

inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your

Camcorder.

• _/O_.ID SUt)OEN Ct'IAI_IIGES tt4 "TEMPERA'T_RE ... tf the unit _s suddent'# moved from eL cold _la.(_ to e, w_.rm

place, moisture rna.y IOrtTt On the tape a.nd inside the urt_t.

• DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.

• STORAGE OF YOUR CAMCORDER ,,. Store and handle your Camcorder in a manner thatwillnotsubjectitto

unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which

could be damaged by improper handling or storage.

CARE

• TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder

body,

• TO PROTECT THE LENS .. Do not touch the surface of the lens with your hand. Use a commercial camcorder

lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.

• TO PROTECT THE FINISH OF YOUR CAMCORDER .., Before handling your Cemcorder, make sure your

hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.

Things You Should Know ....................................................... 2

Important Safeguards and Precautions ......................................................... _............ 3

Quick Guide ...................................................................................................... _............ 6

Supplying Power ............................................................................................... _............ 7

Cassette Information ........................................................................................ L........... 10

Setting the Clock ......................................................................................................... 11

Electronic Viewflnder Indications .............................................................................. 15

Built-in Light (PV-IQ325/PV-IQ425/PV-IQ525) ........................................................... 17

Attaching the Shoulder Strap ........................................................................ 18

............................................................ _,,...... _................................. 19

8-Function Remote Control (PV-IQ325/PV-IQ425/PV-IQ525) .................................. 21

Playback your Recordings ......................................................................................... 22

Four Speed Power Zoom ......................................................................................... 25

One-Touch Auto Fade .............................................................................................. 25

Focusing .................................................................................................................... 26

High Speed Shutter .................................................................................................. 27

Backlight .................................................................................................................... 28

Digital Zoom (PV-IQ425/PV-IQ525) ......................................................................... 29

Digital Electronic Image Stabilization System (D.E.I.S,) (PV-IQ425/PV-IQ525). 30

Negative/Positive Transposer (PV-IQ425/PV-IQ525) ............................................ 30

Copying your Tapes (dubbing) .................................................................................. 31

i_*Ti'|i]l I i _ {*] d111_-| ( [.] i

Palmcorder Accessory System .................................................................................. 32

Notes Regarding Operations ...................................................................................... 33

Specifications .............................................................................................................. 35

Before Requesting Service ......................................................................................... 35

Index of Controls ......................................................................................................... 37

Index .............................................................................................................................. 42

Spanish Quick Use Guide/Guia Para Uso R6pido ................................................... 43

ThisoperatinginstructionbookisdesignedforusewithmodelsPV-IQ225andPV-IQ325andPV-IQ425andPV-IQ525.

IllustrationsinthismanualshowthePV-IQ525.Featuresmayvary,sopleasereadcarefully.

t)ifferences between models

Model Number _/iewfinder

PV-IQ225 Black and White

PV-IQ325 Color

PV-IQ425 Black and White

PV-IQ525 Color

B-Function I_emote Control Buitt-irt L_ght

Supplied O

Model Number

PV-IQ225

PV-IQ325

PV-IQ425

PV-IQ525

Backlight D.E.I.S I Digital Zoom

1 Step _ _

1 Step _

3 Steps O O

Negative/Positive Transposer

i ,i

Charge the Battery (see page 7).

_Attach the Battery

(see page 7).

Slide the TAPE EJECTswltch

to open the door.

Z_lnsert a cassette

(see page 10).

Press PUSH TO CLOSE

the door.

Set the POWER switch to cAMI_RA.

Built-In Lens Cover opens and Power

indicator lights.

Slide the TAPE SPEED

Selector for (SP or SLP

see page 10).

POWER

• ator

Press RECORD/PAUSE to start recording.

Press RECORD/PAUSE again

recording.

With the Eye Cup

against your eye,

adjust the Vision

Adjustment Control•

Set the POWER switch

to VCR.

Press REWIND/

SEARCH to

rewind the tape.

Press PLAY

to start playback.

Press STOP

to stop playback.

Charge the Battery Pack fully before operation.

? /__ (_) ('-.J[ Plug in the AC Adaptor.

Power __ ] Power Indicator lights uP•

Charge _ I-_

Indicat°r _ L (__ 2 Insert the Battery

(_9Slide the top of the Battery forward.

(_ Press down until it locks with a click.

Charge Indicator lights up, and goes out

when charging is done

(about one and a half hours).

Remove the Battery

_) Slide Battery forward.

_) Lift up and out.

Note:

Afterrechargingthe BatteryPack about5 times,

usethe BA'I-FERYREFRESH feature as

explainedonpage 8.

With a fully charged Battery Pack, you will have about one and a half hours of

continuous use. (If the Built-in Light is used, battery operating time decreases.)

'1 Attach the Battery

(_ /k\%_n the Battery with the 'rOD, Of the

n'%OU n%.%ng _,urt_.ce,

(_) Press it _nto ptace until it locks w_tha

click.

2 Remove the Battery _ .....

While sliding the BATTERYRELEASE

button, remove the Battery.

This _eature completely discharges the Battery before recharging begins.

To keep your Battery in top condition, use Refresh after about every 5 charges.

1 Plug in AC Adaptor.

• '2 Place the Battery into __

• the AC Adaptor.

Charge Indicator

Press the BATTERY REFRESH

button.

The Charge indicator will flash when

discharging begins and stop flashing

when fully discharged. Charge indicator

will stay lit when fully charged.

• Should you accidentally press the BA'I-['ERY

REFRESH button, remove Battery and then

re-insert it to begin charging.

• It takes about seven and a half hours when

both Battery Refresh and charging are

performed.

I_._ ATTENTION: "_

The product that you have purchased is powered by a rechargeable battery. The battery|

is recyclable. At the end of its useful life, under various state and local laws, it may be |

illegal to dispose of this battery into the municipal waste stream. Check with your local |

solid waste officials for details in your area for recycling options or proper disposal. .J

Caution:

• Charge only with specified charger.

• The Battery can be charged within a tempera-

ture range of 32° F (0° C) and 104 ° F (40 ° C).

• The Battery may be warm after charging or

just after use. This is normal•

•Do not use an insufficiently charged or worn

out Battery.

Safety precautions:

•OO not get the Battery near, or dispose ot in,

fire.

• Do not directly connect (short circuit) the

positive (+) and negative (-) terminals.

• Never attempt to disassemble or reassemble

the Battery.

To avoid damage to the Battery:

• Do not drop or jar the Battery.

• Use the Battery with specified units only.

• If the Battery is used in extremely high

temperatures, a safety device will automati-

cally prevent operation,

To insure longer battery life:

• While not in use, remove Battery from the

Palmcorder and AC Adaptor and store In a

cool, dark, dry place.

• Keep the Battery terminals clean.

DC Input

Connector

1 Connect the DC Output on the AC Adaptor

to the DC Input on the Palmcorder with the

DC Power DC Power Cable (supplied):

Cable --A

Power

Indicator

the AC Adaptor.

• The Powerindicatorwilllightup,

Note: :

AC Adaptord_es notfunctionwhilechargingthe Battery.

DC Input

Connec__

Cigarette Lighter

Socket (12V)

Connect a PV-C16 Car Battery Cord

(optional) to the DC Input of the

Palmcorder.

Start your car engine and then Insert

the Car Battery Cord plug into your

ofthe cord.

Shouldfuse replacementbe necessaryuse

the exactcurrentrating(in amps).

Car Battery Cord Cigarette

(optional) Lighter Plug

Note:

Thiscord canonlybe usedin vehiclesequipped

withDC 12V (negative ground) batteries.

Useonlythe specifiedcarbattery cord.

Connect the Palmcorder to a power source to open the door.

_ 1Turn the Tape Wheel in the direction

of the arrow until there is no slack.

TAPE EJECT switch

to open the door.

Insert the cassette vertically

with its window side facing out.

Press PUSH TO CLOSE

•To remove the cassette, slide the TAPE EJECT switch, the door.

Use tapes with the _ mark in this unit.

Tape Speed Selector Cassette type

Position T-20

SP (Standard Play) 20 Minutes

SLP (Super LongPlay) 1Hour

TAPE SPEED

T-30 T-40

30 Minutes' 40 Minutes

1Hour 2 Hours

30 Minutes

SP provides the best picture, but the shortest recording time.

• SLP provides three times the recording time as SP. SLP has slightly more picture noise in

playback.

_1To prevent accid__SlentaI erasure iding

Break off the tab with a screwdriver.

(Some tapes have a sliding tab.)

- I m

Cassettes have a record tab to ensure that recordings are not accidentally erased.

tab _

To record again

Cover the hole with adhesive tape.

Date and time are preset as Eastern

Standard time beforehand. If you live in

other time zones, just select the

appropriate time zone from menu screen.

Then the date/time are automatically

adjusted to the standard time of your time

zone.

Press CLOCK SET UP • to display

the CLOCK SET menu.

Before you begin .... l

• Connect the Palmcorder to _ p_wer source.

• Set the POWER switch to VCR or CAMERA.

Note: i

The Palmcorderwillexitthe CLOCKSET menu

if, afteractivation,noneofthe CLOCK SET

A,V or DISPLAYbuttonsare pressedwithin30

seconds.

The Palmcorderrs clockmay _oseor geln u_ to

two minutes per month. Please adjustas

necessary (refer to page 13).

_ME -- • CLOCK 8Er--- 1

13.DATEKIME SETrlNG /

I /

JSELECT: PUSH VIA KEY /

_r :PUSHDISPLAYKEY)

Press • or • repeatedly to select

lil_'t=l!=[_='llLVJl=lr_[0]fl=llfrom the

CLOCK SET menu.

ILP Press DISPLAY to display the

SELECT TIME ZONE menu.

f---SELECT TIME ZONE---_

..... J |__._ PACIFIC /

/l_3_fi_ ALASKA /

/CEN'rRAL HAWAII /

ISELECT: PUSH VIA KEY /

Press • or • repeatedly to select

one of the eight time zones of the

location where you are using the

Palmcorder.

_,_ Press DISPLAY to fix the Time Zone. Time Zone chart

The CLOCK SET menu appears.

"I"o exit from the CLOCK SIF_'r

menu, Select _ and press

DISPLAY.

i Note: I

When you travel outside the eight time ,.'_'"""_pwM':.-,_

zones right, please set the clock _P_....i

manually (see page 13). ! e:®i 7:oo

9:00 10:00_ 11:00 _ 12:00_ 1:00 :"2:00

The clock will automatically adjust to

daylight saving time so you do not have to

_ do it manually.

Z Press CLOCK SET UP • to display

the CLOCK SET menu.

-- 3 Press DISPLAY to display the

DAYLIGHT SAVING TIME menu.

tJ Press DISPLAY to fix the

DAYLIGHT SAVING TIME setting.

The OLOOK ClOT menu appe._r¢.

To exit from the CLOCK SET

menu, Select _ and press

DISPLAY.

Before you begin...

• Connect the Palmcorder to a power source.

• Set the POWER switch to VCR or CAMERA.

Note:

The Palmcorder will exit the CLOCK SET

menu if, after activation, none of the CLOCK

SET A,V or DISPLAY buttons are pressed

within 30 seconds.

If Hawaii or Samoa Time Zone is selected, the

clock will not automatically adjust to daylight

saving time.

Press • or • repeatedly to select

D_, • .' L _ from the

CLOCK SET menu.

If ---CLOCK SET--- "_

Press •

. DAYI._HT_NG TIME

OFF /

ISELI_C'r:PUSHVI&I_=Y l

_ET : PUSH DISPLAY KE'Y_

or • to select AUTO or OFF.

Spring:

First Sunday in April (DAYLIGHT SAVING TIME:

AUTO) Automatically adds one hour and adjusts

the clock.

1:00 a m 2:00 a.rn.

INORMAL TIME i1 _ " ' :

DAYLIGHT l

SAVING TIME _" -- I_

3:00 aim. 4:00 a.m.

Autumn:

Last Sunday in October (DAYLIGHT SAVING

TIME: AUTO) Automatically turns back one hour

and adjusts the clock.

DAYLIGHT _0 a.m.

AVING TIME

_, --

'_0RMAL TIMEJ -- - I_

1:00 a.m, 2:00 a.m.

The date and time is calculated, including

leap year, up to DEC 31 2093.

Press CLOCK SET UP A to display

the CLOCK SET menu.

Before you begin...

• Connect the Pa/mcorderto a powersodrce.

• Setthe POWER switch toVCR or CAMERA.

- Note:

The Palmcorderwillexitthe CLOCK SET

menuif, after activation, noneof theCLOCK

SET A,V or DISPLAYbuttons are pressed

within30 seconds.

_e._ Press DISPLAY to display the \

DATEi'[tME SETTING menu.

Press & or • repeatedly (or hold

down) to enter the desired numbers,

then, press DISPLAY to fix that

portion and move to the next.

[_lp ,&:2OPM _uL_, FSE'B--!; 1995

EF-FEB- 1_995=b 0 "2_P_

When you finish setting the year, the

clock starts operatir_g, and the CLOCK

SET menu appears.

To exit from the CLOCK SET menu,

Select _ and press DISPLAY.

E_.._E___Bb _ _:_oP_....FEB 12-1995-

Elbow.FE_1_-_97,,_=_

The date and time function operates on a

preinstalled miniature battery.

I While pinching the stopper

tabs, pull the tray out of the

Battery Compartment.

Underside View

Replace the battery into the Battery

tray with the (_ mark facing down until it

snaps into place.

• Do not reverse the polarity.

Replace the Battery tray so that

the small triangle marks meet.

i How to remove the Battery.

(_ Bend the lock tab outward.

(_ (_ Remove the battery.

Note:

• Make sure your Palmcorder is off when

replacing the battery.

• Keep the Battery out of the reach of children

since swallowing it may be harmful.

• When the Battery is installed improperly, is

discharged, or missing, the words =CLOCK

BATTERY" appears on the EVF.

• Battery life is approximately 5 years,

EPLACE BATTERY WITH PANASONIC

ART NO. VSBW0004 (CR2025) ONLY. USE

F ANOTHER BATTERY MAY PRESENT A

ISK OF FIRE OR EXPLOSION.

AUTION-BATTERY MAY EXPLODE IF

I_'I"P.__.a.T__D_ DI_PO._E O1= U.Q,I_D

_FTEF:_y L_=_ROMIC:_TLY. KEEP AWAy FROM

I,_A_SF--t'4_BLE OP_ _l,_PO,_. OF: IN F_P,F_..

Set the POWER

switch to CAMERA•

The tape remaining and battery charge level can be displayed during recording.

Press DISPLAY repeatedly

to select the desired display.

EVF Indications

Battery Charge Tape

Remaining: Remaining:

-Jl_- (No tape)

FULL _ _ FULL

-_1 -I_II'l EMPTY

• It will take several seconds for the tape

remaining indicator to operate after the tape

starts moving.

First press

xl AUTO-H.S.S, 1 AUTO-H.S.S. RE

12.'OOAM

Fourth / I SecOnd

press press

Third

rlmI RSEP1

xl AUTO-H,S.S.

press

Set the POWER /r

switch to CAMERA.

When placed in

Record mode, the time AM

and date will be LJAN_ 1_

recorded on the tape.

_p_ Press DISPLAY once

R 1 to change the display

to date only. Press

once or twice more to

remove the date/time

display.

Note:

nly the Date and Time are recorded on the Tape.

IJAN1 1995 R_I

Here are some of the basic indications which appear in the Palmcorder EVF.

They will not be recorded on the tape.

REC / _ REC (record)

| PAUSE

| FF (fast forward)

| PLAY

/ REW (rewind)

I \ I / 1

-,,=!,-

Ifthe record tab is missing, this indicator will flash and

recording will not start.

This indicator flashes when the tape is about to end in

REC mode.

". _ ,'__lf excessive moisture condenses in the unit, it will not

-pEW-[ operate. This indicator will flash for several seconds

i J and the Palmcorder will automatically turn OFF.

| In this case, wait until the indicator no longer flashes

J when your Palmcorder is turned on again.

0:50 !

VCR-MODE

..I ,*s.

-.'.,,l:_:_,..- and Power Indicator will flash for a few

minutes prior to automatic power shut off. When this

happens, a battery recharge is necessary (see page 7).

An elapsed time indicator appears for one second

every 10 seconds that recording continues.

This is a reminder of how long you have been shooting

a particular scene and can help keep your recordings

{_._._-_. ,,_<::1, :.._-,.'t._'_.._'_._,_"_,_.

0:00 0:10 0:20 ..... 59:50

1" I

(return to 0:00 and continue)

• lO-Second Reminder will be reset whenever you press

Record/Pause.

"VCR-MODE" will appear for one minute if the POWER

switch is set to VCR or the RECORD/PAUSE button is

pushed in VCR Mode.

/U_'t4"q.'-_lf_/_"_,t_dtt_r_'_RtW_rVl7_" Before you begin...

Your can enjoy both indoor and outdoor • Connect the Palmcorder to a power source.

recording using the ready-to-use light. •Set the POWER switch to CAMERA,

Press LIGHT button ON.

Pressagain to turn off.

Caution:

This light becomes hot during

operation. Make sure nothing

covers the Light during operation.

Turn screw counter-

clockwise and

Before you begin...

• Set the POWER switchto OFF.

Remove the Built-in Light unit

from the Palmcorder.

Turn the Bulb Housing counterclockwise 1/4 of a

turn and pull free from the Built-in Light unit.

Built-in Bulb Housing

Light Unit

Danger:

When replacing the bulb, use only lamp bulbs

(PART NO. VLLWO007) supplied by

Panasonic to reduce the risk of fire.

Use a cloth or tissue when handling the bulb

as finger oils will decrease the bulb life.

To prevent possible burn hazard, disconnect

the Built-in Light and allow the lamp to cool

before replacing. ._

ng a clean cloth or _,_L-_(-.-_ J

tissue, replace the bulb.

Replace the Bulb Housing turning it

clockwise, then replace the Built-in

Light Unit. Finally, replace the screw.

Note:

• If usingthe Built-in Lightfor an extended

periodof time,be sureto provideventilation

whenina hot environment.

• UsingtheBuilt-inLightwhen the Palmcorderis

powered bya car bafferymay shortenbulb life.

Make sure the Battery Pack is not attached.

](_) Pinch the tabs together on either side

of the clasps (_) and open the buckles.

Buckle Catch

_ 2Unhook the strap from the Buckle Catch.

Thread the strap ends through the Strap

Attachment Rings. Then re-hook them onto

the Buckle Catch.

Snap both clasps shut to lock the strap in

place.

Pull a loop of the strap loose 1_

from the buckle. _! __

L l

_o 2Pull the strap firmly throughthe buckle

B'f,,_q_.'/_Jr,_em to adjust the length.

• Irt_

Adjust the length to the size of your hand

using the illustration at left as a guide.

Tally Light

With the Eye Cup against your eye, adjust the

Vision Adjustment Control to your eyesight.

Underside View

(PV-IQ325)

(PV-IQ425)

Vision Adjustment

Control

Before you begin...

• Connect the Palmcorder to a power source.

• Insert a cassette with record tab (see page 10).

I set the POWER switch to CAMERA.

Built-In Lens Cover opens.

EVF

I "

PAUSE

Record/Pause

mode.

Slide the TAPE SPEW Selector

to SP or SLP (refer to page 10).

TAPE EJECT

Helpful Notes:

YO conserve power

fter 5 minutes the Record/Pause mode will

utomatically change to Standby mode.

{ To resume recording, set the POWER switch

Ito OFF and then CAMERA.

4(_ Press RECORD/PAUSE to start recording.

The Tally Light and RECORD/PAUSE are tit

record_n9.

• To remove the cassette

InRecord/Pausemode,slidetheTAPE

EJECTswitch(refertopageI0).

If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to

make a smooth transition between scenes.

Set the POWER switch to OFF and leave

the cassette in the Palmcorder.

Set the POWER switch to CAMERA and

press RECORD/PAUSE (within 24

hours) to continue recording,

POWER Switch

Note:

• If it is longer than 24 hours before you resume

recording, use the manual Easy Edit feature

described below.

For proper continuity when taping from the Stop mode, or after changing the Battery

Pack.

Set the POWER switch to VCR.

® Press REWIND/SEARCH to go

back a few seconds on the tape.

® Press PLAY to review the picture

on the Viewfinder.

(_ Press STILL at the location you

w_sh to continue your recording.

To prepare for recording, set the

POWER switch to CAMERA.

Press RECORD/PAUSE to continue

recording.

Page is loading ...

Panasonic PV-IQ425 Owner's manual

Brand: Panasonic

Model: PV-IQ425

Category: Camcorders

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Panasonic PV-IQ425 Owner's manual

This manual is also suitable for

Panasonic PV-IQ425 Owner's manual

Related papers

Other documents