Panasonic PV-IQ325 Owner's manual

Category
Camcorders
Type
Owner's manual

This manual is also suitable for

Panasonic
PalmcoPdcp IQ _
Camcorder
Operating Instructions
PV-IQ225fPV-IQ325
PV-IQ425/PV-IQ525
Beforeattemptingtoconnect,operateor adjustthisproduct,pleasereadthesetnstrudlor_§_horoughl_.
Spanish Quick Use Guide is included.
Guia para r&pida consulta en espafiol est& incluida.
VQTW0553 _)
Thank you for choosing Panasouic!
You have purchased one ofthe most
sophisticatedand reliable productson the
market today. Used properly, we're sure it
willbring you and your family years of
enjoyment. Please take time tofill inthe
informationat right. The serial number ison
the tag located onthe underside ofyour
Palmcorder. Be sure to retain this manual
as your convenient Palmcorder information
source.
f
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.
These accessories are provided =norder to set up or use your Palmcorder.
1pc. AC Adaptor
(PV-A16)
1 pc. Battery Pack
(PV-BP18)
1 pc. AudioNideo
Cable (VJAW0026)
1 pc. Shoulder Strap
(VYCW0071 )
1 pc. VHS PlayPak
(PV-PINYMW0009)
and one "AA" battery
1 pc.8-Function Remote (VSQW0009)
with one CR2025 Battery
(with PV-IQ325/PV-IQ425/PV-IQ525)
Remote has been loaded with battery and
comes stored in Palmcorder. See page 21.
1 pc. CR2025 Clock
Battery (VSBW0004)
(installed in Palmcorder)
WARNING: TO PREVENT FiRE OR SHOCK HAZARD, DO NOT E_XPOS_ THIS
EQUIPMENT TO RAIN OR MOISTURE.
Your Compact VHS Palmcorder is designed to record
and play back in Standard Play (SP) and Super Long
Play (SLP) modes. You can also play a Compact VHS
Pa_mcor_er reP-,ord\ng on ",]o_r V_S k/CP, usln 9 the
VHS PlayPak supplied
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
This Palmcorder is equipped with the HQ System to
provide excellent video pictures, and =scompahble
with standard VHS equipment.
|t is recommended that only cassette tapes that have
been tested and inspected for use in VCF_ mach_r_es
with the _ and/or _ mark be used.
r
Th_s symbol warns the user that
umnsulated voltage within the unit may
have suffic=ent magnitude to cause electric
shock Therefore, it is dangerous to make
any kind of contact with any inside part of
this unit.
Thissymbolalertstheuserthatimportant
literature concerning the operation and
maintenance of this unit has been included
Therefore, it should be read carefully tn
order to avoid any problems.
2
1. Read Instructions -- All the salety and operating
instructions should be read before the umt _s
operated.
2. Retain Instructions - The safety and operahng
instructions should be retained for future reference
3. Heed Warnings -- All warnings on the unit and in
the operating instructions should be adhered to.
4. Follow Instructions -- All operating and
maintenance instructions should be followed.
5. Cleaning -- Unplug this video unit from the wall
outlet before cleaning. Do not use liquid or aerosol
cleaners. Use e dry cloth for cleaning.
6. Attachments -- Do not use attachments not
recommended by the video product manufacturer
as they may be hazardous.
7. Water and Moisture -- Do not use this video unit
near water -- for example near a bath tub, wash
bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
8. Accessories -- Do not place this video unit on an
unstable cart, stand, tripod, bracket, or table. The
video unit may fall, causing serious injury to a child
or adult, and serious damage to the unit. Use only
with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
video unit. Any mounting of the unit should follow
the manufacturer's instructions and should use a
mounting accessory recommended by
the manufacturer. An appliance and
cart combination should be moved
with care. Quick stops, excessive
force, and uneven surfaces may
cause the appliance and ca,"*
combination to overturn.
9. Ventilation -- Slots and openings In the cabinet are
provided for ventilation and to ensure reliable
operation of the video unit and to protect it from
overheating These openings must not be blocked
or covered. Never place the video unit on a bed,
sofa, rug, or other similar surface, or near or over a
radiator or heat register. This video unit should not
be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is
provided or the manufacturer's instructions have
been adhered to.
10. Power Sources -- This video unit should be
operated only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supply to your home, consult
your appliance dealer or local power company. For
video units intended to be operated from battery
power, or other sources, refer to the operating
instructions.
| i Gruund=ng of Polartzat_on -- Th=svideo unit may
be equipped with either a polanzed 2-wire AC
(Alternating Current) line plug (a plug having one
blade wider than the other) or 3-wire grounding
type plug, a plug having a third (grounding) pin.
The 2-wire polarized plug wUl fit into the power
outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug still fails to fit, contact
your electr=cian to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug.
The 3-wire grounding type plug will fit into a
grounding type power outlet. This is a safety
feature. If you are unable to insert the plug into the
outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of
the grounding type plug.
12. Power-Cord Protection -- Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attenhon to cords of
plugs, convenience receptacles, and the point
where they exit from the unit.
13. Outdoor Antenna Grounding - If an oufsld'e
antenna or cable system is connected to the video
unit, be sure the antenna or cable system is
grounded so as to provide some protection against
voltage surges and built-up static charges Part 1 of
the Canadian Electrical Code, in USA Section 810
of the National Electncal Code, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the
lead-in wire to an antenna d=scharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
ANTENNA
m"'_ LEAD IN
WIRE
ER SERVICE GI_OUNOING
ELECTRODE SYSTEM
NEC- NATIONAL EUECTRICALCODE (NECART250 PART H)
14. Lightning -- For added protection of this video unit
receiver during a hghtning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the video unit due to lightning and power-hne
surges.
3
15. Power Lines -- An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fetel.
16. Overloading -- Do not overload wall outlets and
extension cords as this can result in a risk of fire or
electric shock.
17. Objects and Liquids -- Never push objects of any
kind into this video unit through openings as they
may touch dangerous voltage points or short out
perts that could result in a fire or electric shock.
Never spill liquid of any kind onto the video unit.
18. Servicing -- Do not attempt to service this video
unit yourself as opening or removing covers may
expose you to dangerous voltage or other hazards,
Refer ell servicing to qualified service personnel.
19. Damage Requiring Service -- Unplug this video
unit from the wall outlet end refer servicing to
qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is
damaged,
b. If any liquid has been spilled onto, or objects
have fellen into the video unit.
c. If the video unit has been exposed to rain or
water.
d. If the video unit does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions, as an improper adjustment of other
controls may result in damage and will often
require extensive work by e quelified technicien
to restore the video unit to its normel operetion.
e. If the video unit has been dropped or the cabinet
has been damaged.
f. When the video unit exhibits e distinct change in
performance -- this indicates a need for service.
20. Replacement Perts -- When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics es the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
21. Safety Check-- Upon completion of any service or
repairs to this video unit, ask the service technician
to perform safety checks to determine that the
video unit is in safe operating order.
USE & LOCATION
TO AVOID SHOCK HAZARD ... Your Camcorder and power eul_y should not be exposed to rain or moisture.
Do not connect the power supply or operate your Camcorder If it gets wet. Your Camcorder has been designed
for outdoor use, however it is not designed to sustain direct exposure to water, rain, sleet, snow, sand, dust, or a
direct splashing from a pool or even a cup of coffee. This action could permanently damage the internal parts of
your Camcorder. Do not attempt to disassemble this unit. There are no user serviceable parts inside. Unplug
your Camcorder from the power supply before cleaning.
DO NOT AIM YOUR CAMCORDER AT THE SUN OR OTHER BRIGHT OBJECTS
DO NOT EXPOSE YOUR CAMCORDER TO EXTENDED HIGH TEMPERATURE ... Such as, In direct sunlight,
inside a closed car, next to a heater, etc... This action could permanently damage the internal parts of your
Camcorder.
_/O_.ID SUt)OEN Ct'IAI_IIGES tt4 "TEMPERA'T_RE ... tf the unit _s suddent'# moved from eL cold _la.(_ to e, w_.rm
place, moisture rna.y IOrtTt On the tape a.nd inside the urt_t.
DO NOT LEAVE YOUR CAMCORDER OR THE POWER SUPPLY TURNED ON WHEN NOT IN USE.
STORAGE OF YOUR CAMCORDER ,,. Store and handle your Camcorder in a manner thatwillnotsubjectitto
unnecessary movement (avoid shaking and striking). Your Camcorder contains a sensitive pick-up device which
could be damaged by improper handling or storage.
CARE
TO CLEAN YOUR CAMCORDER ... Do not use strong or abrasive detergents when cleaning your Camcorder
body,
• TO PROTECT THE LENS .. Do not touch the surface of the lens with your hand. Use a commercial camcorder
lens solution and lens paper when cleaning the lens. Improper cleaning can scratch the lens coating.
TO PROTECT THE FINISH OF YOUR CAMCORDER .., Before handling your Cemcorder, make sure your
hands and face are free from any chemical products, such as suntan lotion, as it may damage the finish.
4
Things You Should Know ....................................................... 2
Important Safeguards and Precautions ......................................................... _............ 3
Quick Guide ...................................................................................................... _............ 6
Supplying Power ............................................................................................... _............ 7
Cassette Information ........................................................................................ L........... 10
Setting the Clock ......................................................................................................... 11
Electronic Viewflnder Indications .............................................................................. 15
Built-in Light (PV-IQ325/PV-IQ425/PV-IQ525) ........................................................... 17
Attaching the Shoulder Strap ........................................................................ 18
............................................................ _,,...... _................................. 19
8-Function Remote Control (PV-IQ325/PV-IQ425/PV-IQ525) .................................. 21
Playback your Recordings ......................................................................................... 22
Four Speed Power Zoom ......................................................................................... 25
One-Touch Auto Fade .............................................................................................. 25
Focusing .................................................................................................................... 26
High Speed Shutter .................................................................................................. 27
Backlight .................................................................................................................... 28
Digital Zoom (PV-IQ425/PV-IQ525) ......................................................................... 29
Digital Electronic Image Stabilization System (D.E.I.S,) (PV-IQ425/PV-IQ525). 30
Negative/Positive Transposer (PV-IQ425/PV-IQ525) ............................................ 30
Copying your Tapes (dubbing) .................................................................................. 31
i_*Ti'|i]l I i _ {*] d111_-| ( [.] i
Palmcorder Accessory System .................................................................................. 32
Notes Regarding Operations ...................................................................................... 33
Specifications .............................................................................................................. 35
Before Requesting Service ......................................................................................... 35
Index of Controls ......................................................................................................... 37
Index .............................................................................................................................. 42
Spanish Quick Use Guide/Guia Para Uso R6pido ................................................... 43
ThisoperatinginstructionbookisdesignedforusewithmodelsPV-IQ225andPV-IQ325andPV-IQ425andPV-IQ525.
IllustrationsinthismanualshowthePV-IQ525.Featuresmayvary,sopleasereadcarefully.
t)ifferences between models
Model Number _/iewfinder
PV-IQ225 Black and White
PV-IQ325 Color
PV-IQ425 Black and White
PV-IQ525 Color
B-Function I_emote Control Buitt-irt L_ght
Supplied O
Supplied O
Supplied O
Model Number
PV-IQ225
PV-IQ325
PV-IQ425
PV-IQ525
Backlight D.E.I.S I Digital Zoom
1 Step _ _
1 Step _
3 Steps O O
3 Steps O O
Negative/Positive Transposer
O
i ,i
O
5
Charge the Battery (see page 7).
_Attach the Battery
(see page 7).
Slide the TAPE EJECTswltch
to open the door.
Z_lnsert a cassette
(see page 10).
Press PUSH TO CLOSE
the door.
Set the POWER switch to cAMI_RA.
Built-In Lens Cover opens and Power
indicator lights.
Slide the TAPE SPEED
Selector for (SP or SLP
see page 10).
POWER
ator
Press RECORD/PAUSE to start recording.
Press RECORD/PAUSE again
recording.
With the Eye Cup
against your eye,
adjust the Vision
Adjustment Control•
Set the POWER switch
to VCR.
Press REWIND/
SEARCH to
rewind the tape.
6
Press PLAY
to start playback.
Press STOP
to stop playback.
Charge the Battery Pack fully before operation.
? /__ (_) ('-.J[ Plug in the AC Adaptor.
1
Power __ ] Power Indicator lights uP
Charge _ I-_
Indicat°r _ L (__ 2 Insert the Battery
(_9Slide the top of the Battery forward.
(_ Press down until it locks with a click.
Charge Indicator lights up, and goes out
when charging is done
(about one and a half hours).
Remove the Battery
_) Slide Battery forward.
_) Lift up and out.
Note:
Afterrechargingthe BatteryPack about5 times,
usethe BA'I-FERYREFRESH feature as
explainedonpage 8.
With a fully charged Battery Pack, you will have about one and a half hours of
continuous use. (If the Built-in Light is used, battery operating time decreases.)
'1 Attach the Battery
(_ /k\%_n the Battery with the 'rOD, Of the
n'%OU n%.%ng _,urt_.ce,
(_) Press it _nto ptace until it locks w_tha
click.
2 Remove the Battery _ .....
While sliding the BATTERYRELEASE
button, remove the Battery.
7
This _eature completely discharges the Battery before recharging begins.
To keep your Battery in top condition, use Refresh after about every 5 charges.
1 Plug in AC Adaptor.
'2 Place the Battery into __
the AC Adaptor.
@
Charge Indicator
Press the BATTERY REFRESH
button.
The Charge indicator will flash when
discharging begins and stop flashing
when fully discharged. Charge indicator
will stay lit when fully charged.
Should you accidentally press the BA'I-['ERY
REFRESH button, remove Battery and then
re-insert it to begin charging.
It takes about seven and a half hours when
both Battery Refresh and charging are
performed.
I_._ ATTENTION: "_
The product that you have purchased is powered by a rechargeable battery. The battery|
is recyclable. At the end of its useful life, under various state and local laws, it may be |
illegal to dispose of this battery into the municipal waste stream. Check with your local |
solid waste officials for details in your area for recycling options or proper disposal. .J
Caution:
Charge only with specified charger.
The Battery can be charged within a tempera-
ture range of 32° F (0° C) and 104 ° F (40 ° C).
The Battery may be warm after charging or
just after use. This is normal•
Do not use an insufficiently charged or worn
out Battery.
Safety precautions:
OO not get the Battery near, or dispose ot in,
fire.
Do not directly connect (short circuit) the
positive (+) and negative (-) terminals.
Never attempt to disassemble or reassemble
the Battery.
To avoid damage to the Battery:
Do not drop or jar the Battery.
Use the Battery with specified units only.
If the Battery is used in extremely high
temperatures, a safety device will automati-
cally prevent operation,
To insure longer battery life:
While not in use, remove Battery from the
Palmcorder and AC Adaptor and store In a
cool, dark, dry place.
Keep the Battery terminals clean.
8
DC Input
Connector
1 Connect the DC Output on the AC Adaptor
to the DC Input on the Palmcorder with the
DC Power DC Power Cable (supplied):
Cable --A
t
Power
Indicator
the AC Adaptor.
The Powerindicatorwilllightup,
Note: :
AC Adaptord_es notfunctionwhilechargingthe Battery.
DC Input
Connec__
Cigarette Lighter
Socket (12V)
Connect a PV-C16 Car Battery Cord
(optional) to the DC Input of the
Palmcorder.
Start your car engine and then Insert
the Car Battery Cord plug into your
ofthe cord.
Shouldfuse replacementbe necessaryuse
the exactcurrentrating(in amps).
Car Battery Cord Cigarette
(optional) Lighter Plug
Note:
Thiscord canonlybe usedin vehiclesequipped
withDC 12V (negative ground) batteries.
Useonlythe specifiedcarbattery cord.
9
Connect the Palmcorder to a power source to open the door.
_ 1Turn the Tape Wheel in the direction
of the arrow until there is no slack.
TAPE EJECT switch
to open the door.
Insert the cassette vertically
with its window side facing out.
Press PUSH TO CLOSE
To remove the cassette, slide the TAPE EJECT switch, the door.
Use tapes with the _ mark in this unit.
Tape Speed Selector Cassette type
Position T-20
SP (Standard Play) 20 Minutes
SLP (Super LongPlay) 1Hour
TAPE SPEED
el
T-30 T-40
30 Minutes' 40 Minutes
1Hour 2 Hours
30 Minutes
SP provides the best picture, but the shortest recording time.
SLP provides three times the recording time as SP. SLP has slightly more picture noise in
playback.
_1To prevent accid__SlentaI erasure iding
Break off the tab with a screwdriver.
(Some tapes have a sliding tab.)
- I m
Cassettes have a record tab to ensure that recordings are not accidentally erased.
tab _
To record again
Cover the hole with adhesive tape.
10
Date and time are preset as Eastern
Standard time beforehand. If you live in
other time zones, just select the
appropriate time zone from menu screen.
Then the date/time are automatically
adjusted to the standard time of your time
zone.
Press CLOCK SET UP to display
the CLOCK SET menu.
Before you begin .... l
Connect the Palmcorder to _ p_wer source.
• Set the POWER switch to VCR or CAMERA.
Note: i
The Palmcorderwillexitthe CLOCKSET menu
if, afteractivation,noneofthe CLOCK SET
A,V or DISPLAYbuttonsare pressedwithin30
seconds.
The Palmcorderrs clockmay _oseor geln u_ to
two minutes per month. Please adjustas
necessary (refer to page 13).
_ME -- CLOCK 8Er--- 1
13.DATEKIME SETrlNG /
I /
JSELECT: PUSH VIA KEY /
_r :PUSHDISPLAYKEY)
Press or repeatedly to select
lil_'t=l!=[_='llLVJl=lr_[0]fl=llfrom the
CLOCK SET menu.
m
ILP Press DISPLAY to display the
SELECT TIME ZONE menu.
f---SELECT TIME ZONE---_
..... J |__._ PACIFIC /
/l_3_fi_ ALASKA /
/CEN'rRAL HAWAII /
ISELECT: PUSH VIA KEY /
Press or repeatedly to select
one of the eight time zones of the
location where you are using the
Palmcorder.
_,_ Press DISPLAY to fix the Time Zone. Time Zone chart
The CLOCK SET menu appears.
"I"o exit from the CLOCK SIF_'r
menu, Select _ and press
DISPLAY.
i Note: I
When you travel outside the eight time ,.'_'"""_pwM':.-,_
zones right, please set the clock _P_....i
manually (see page 13). ! e:®i 7:oo
9:00 10:00_ 11:00 _ 12:00_ 1:00 :"2:00
11
The clock will automatically adjust to
daylight saving time so you do not have to
_ do it manually.
Z Press CLOCK SET UP to display
the CLOCK SET menu.
I
-- 3 Press DISPLAY to display the
DAYLIGHT SAVING TIME menu.
tJ Press DISPLAY to fix the
DAYLIGHT SAVING TIME setting.
The OLOOK ClOT menu appe._r¢.
To exit from the CLOCK SET
menu, Select _ and press
DISPLAY.
12
Before you begin...
Connect the Palmcorder to a power source.
Set the POWER switch to VCR or CAMERA.
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation, none of the CLOCK
SET A,V or DISPLAY buttons are pressed
within 30 seconds.
If Hawaii or Samoa Time Zone is selected, the
clock will not automatically adjust to daylight
saving time.
Press or repeatedly to select
D_, .' L _ from the
CLOCK SET menu.
If ---CLOCK SET--- "_
Press
. DAYI._HT_NG TIME
OFF /
ISELI_C'r:PUSHVI&I_=Y l
_ET : PUSH DISPLAY KE'Y_
or to select AUTO or OFF.
Spring:
First Sunday in April (DAYLIGHT SAVING TIME:
AUTO) Automatically adds one hour and adjusts
the clock.
1:00 a m 2:00 a.rn.
INORMAL TIME i1 _ " ' :
DAYLIGHT l
SAVING TIME _" -- I_
3:00 aim. 4:00 a.m.
Autumn:
Last Sunday in October (DAYLIGHT SAVING
TIME: AUTO) Automatically turns back one hour
and adjusts the clock.
DAYLIGHT _0 a.m.
AVING TIME
_, --
'_0RMAL TIMEJ -- - I_
1:00 a.m, 2:00 a.m.
The date and time is calculated, including
leap year, up to DEC 31 2093.
Press CLOCK SET UP A to display
the CLOCK SET menu.
Before you begin...
Connect the Pa/mcorderto a powersodrce.
Setthe POWER switch toVCR or CAMERA.
- Note:
The Palmcorderwillexitthe CLOCK SET
menuif, after activation, noneof theCLOCK
SET A,V or DISPLAYbuttons are pressed
within30 seconds.
9
_e._ Press DISPLAY to display the \
DATEi'[tME SETTING menu.
Press & or repeatedly (or hold
down) to enter the desired numbers,
then, press DISPLAY to fix that
portion and move to the next.
[_lp ,&:2OPM _uL_, FSE'B--!; 1995
EF-FEB- 1_995=b 0 "2_P_
When you finish setting the year, the
clock starts operatir_g, and the CLOCK
SET menu appears.
To exit from the CLOCK SET menu,
Select _ and press DISPLAY.
E_.._E___Bb _ _:_oP_....FEB 12-1995-
Elbow.FE_1_-_97,,_=_
13
The date and time function operates on a
preinstalled miniature battery.
1
I While pinching the stopper
tabs, pull the tray out of the
Battery Compartment.
Underside View
Replace the battery into the Battery
tray with the (_ mark facing down until it
snaps into place.
Do not reverse the polarity.
Replace the Battery tray so that
the small triangle marks meet.
i How to remove the Battery.
(_ Bend the lock tab outward.
(_ (_ Remove the battery.
Note:
Make sure your Palmcorder is off when
replacing the battery.
Keep the Battery out of the reach of children
since swallowing it may be harmful.
When the Battery is installed improperly, is
discharged, or missing, the words =CLOCK
BATTERY" appears on the EVF.
Battery life is approximately 5 years,
EPLACE BATTERY WITH PANASONIC
ART NO. VSBW0004 (CR2025) ONLY. USE
F ANOTHER BATTERY MAY PRESENT A
ISK OF FIRE OR EXPLOSION.
AUTION-BATTERY MAY EXPLODE IF
I_'I"P.__.a.T__D_ DI_PO._E O1= U.Q,I_D
_FTEF:_y L_=_ROMIC:_TLY. KEEP AWAy FROM
I,_A_SF--t'4_BLE OP_ _l,_PO,_. OF: IN F_P,F_..
14
Set the POWER
switch to CAMERA•
The tape remaining and battery charge level can be displayed during recording.
Press DISPLAY repeatedly
to select the desired display.
EVF Indications
Battery Charge Tape
Remaining: Remaining:
-Jl_- (No tape)
FULL _ _ FULL
!
-_1 -I_II'l EMPTY
It will take several seconds for the tape
remaining indicator to operate after the tape
starts moving.
First press
xl AUTO-H.S.S, 1 AUTO-H.S.S. RE
12.'OOAM
Fourth / I SecOnd
press press
Third
rlmI RSEP1
xl AUTO-H,S.S.
press
Set the POWER /r
switch to CAMERA.
When placed in
Record mode, the time AM
and date will be LJAN_ 1_
recorded on the tape.
_p_ Press DISPLAY once
R 1 to change the display
to date only. Press
once or twice more to
remove the date/time
display.
Note:
nly the Date and Time are recorded on the Tape.
i
IJAN1 1995 R_I
15
Here are some of the basic indications which appear in the Palmcorder EVF.
They will not be recorded on the tape.
I
REC / _ REC (record)
| PAUSE
| FF (fast forward)
| PLAY
/ REW (rewind)
I \ I / 1
-,,=!,-
!
Ifthe record tab is missing, this indicator will flash and
recording will not start.
This indicator flashes when the tape is about to end in
REC mode.
I
I
". _ ,'__lf excessive moisture condenses in the unit, it will not
-pEW-[ operate. This indicator will flash for several seconds
i J and the Palmcorder will automatically turn OFF.
| In this case, wait until the indicator no longer flashes
J when your Palmcorder is turned on again.
1
0:50 !
VCR-MODE
..I ,*s.
-.'.,,l:_:_,..- and Power Indicator will flash for a few
minutes prior to automatic power shut off. When this
happens, a battery recharge is necessary (see page 7).
An elapsed time indicator appears for one second
every 10 seconds that recording continues.
This is a reminder of how long you have been shooting
a particular scene and can help keep your recordings
{_._._-_. ,,_<::1, :.._-,.'t._'_.._'_._,_"_,_.
0:00 0:10 0:20 ..... 59:50
1" I
(return to 0:00 and continue)
lO-Second Reminder will be reset whenever you press
Record/Pause.
"VCR-MODE" will appear for one minute if the POWER
switch is set to VCR or the RECORD/PAUSE button is
pushed in VCR Mode.
16
/U_'t4"q.'-_lf_/_"_,t_dtt_r_'_RtW_rVl7_" Before you begin...
Your can enjoy both indoor and outdoor Connect the Palmcorder to a power source.
recording using the ready-to-use light. Set the POWER switch to CAMERA,
Press LIGHT button ON.
Pressagain to turn off.
Caution:
This light becomes hot during
operation. Make sure nothing
covers the Light during operation.
Turn screw counter-
clockwise and
Before you begin...
Set the POWER switchto OFF.
Remove the Built-in Light unit
from the Palmcorder.
Turn the Bulb Housing counterclockwise 1/4 of a
turn and pull free from the Built-in Light unit.
Built-in Bulb Housing
Light Unit
Danger:
When replacing the bulb, use only lamp bulbs
(PART NO. VLLWO007) supplied by
Panasonic to reduce the risk of fire.
Use a cloth or tissue when handling the bulb
as finger oils will decrease the bulb life.
To prevent possible burn hazard, disconnect
the Built-in Light and allow the lamp to cool
before replacing. ._
ng a clean cloth or _,_L-_(-.-_ J
tissue, replace the bulb.
Replace the Bulb Housing turning it
clockwise, then replace the Built-in
Light Unit. Finally, replace the screw.
Note:
If usingthe Built-in Lightfor an extended
periodof time,be sureto provideventilation
whenina hot environment.
UsingtheBuilt-inLightwhen the Palmcorderis
powered bya car bafferymay shortenbulb life.
17
Make sure the Battery Pack is not attached.
®
](_) Pinch the tabs together on either side
of the clasps (_) and open the buckles.
Buckle Catch
_ 2Unhook the strap from the Buckle Catch.
Thread the strap ends through the Strap
Attachment Rings. Then re-hook them onto
the Buckle Catch.
Snap both clasps shut to lock the strap in
place.
Pull a loop of the strap loose 1_
.A
from the buckle. _! __
L l
e_
_o 2Pull the strap firmly throughthe buckle
B'f,,_q_.'/_Jr,_em to adjust the length.
Irt_
Adjust the length to the size of your hand
using the illustration at left as a guide.
18
Tally Light
With the Eye Cup against your eye, adjust the
Vision Adjustment Control to your eyesight.
Underside View
(PV-IQ325)
(PV-IQ425)
Vision Adjustment
Control
Before you begin...
Connect the Palmcorder to a power source.
Insert a cassette with record tab (see page 10).
I set the POWER switch to CAMERA.
Built-In Lens Cover opens.
EVF
I "
PAUSE
Record/Pause
mode.
Slide the TAPE SPEW Selector
to SP or SLP (refer to page 10).
TAPE EJECT
Helpful Notes:
YO conserve power
fter 5 minutes the Record/Pause mode will
utomatically change to Standby mode.
{ To resume recording, set the POWER switch
Ito OFF and then CAMERA.
4(_ Press RECORD/PAUSE to start recording.
The Tally Light and RECORD/PAUSE are tit
record_n9.
To remove the cassette
InRecord/Pausemode,slidetheTAPE
EJECTswitch(refertopageI0).
19
If you stop recording but plan to resume within 24 hours, use the Edit Standby feature to
make a smooth transition between scenes.
Set the POWER switch to OFF and leave
the cassette in the Palmcorder.
Set the POWER switch to CAMERA and
press RECORD/PAUSE (within 24
hours) to continue recording,
POWER Switch
Note:
If it is longer than 24 hours before you resume
recording, use the manual Easy Edit feature
described below.
For proper continuity when taping from the Stop mode, or after changing the Battery
Pack.
Set the POWER switch to VCR.
L
® Press REWIND/SEARCH to go
back a few seconds on the tape.
® Press PLAY to review the picture
on the Viewfinder.
(_ Press STILL at the location you
w_sh to continue your recording.
To prepare for recording, set the
POWER switch to CAMERA.
2O
Press RECORD/PAUSE to continue
recording.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Panasonic PV-IQ325 Owner's manual

Category
Camcorders
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI