NordicTrack NCTL17810.0 User manual

Brand: NordicTrack

Model: NCTL17810.0

Category: Treadmills

Type: User manual

This manual is also suitable for

T7.3 Treadmill

7.3

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number

Decal

Model No. NCTL17810.0

Serial No.

Write the serial number in the space

above for reference.

QUESTIONS?

If you have questions, or if parts

are damaged or missing, PLEASE

CONTACT OUR CUSTOMER

SERVICE DEPARTMENT

DIRECTLY.

CALL TOLL-FREE:

1-888-936-4266

Mon.–Fri., 7:30 until 16:30 ET

(excluding holidays)

OR E-MAIL US:

customerservice@iconcanada.ca

USER'S MANUAL

www.nordictrack.com

TABLE OF CONTENTS

WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

MPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

NordicTrack is a registered trademark of ICON IP, Inc.

This drawing shows the locations of the

warning decals. If a decal is missing or il-

legible, call the telephone number on the

front cover of this manual and request a

free replacement decal. Apply the decal

in the location shown. Note: The decals

may not be shown at actual size.

WARNING DECAL PLACEMENT

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and 2

ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the floor or carpet from dam-

age, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should be used only by per-

sons weighing 325 lbs. (147 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women. Always

wear athletic shoes. Never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

13), plug the power cord into a surge suppres-

sor (not included) and plug the surge sup-

pressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor that

meets all of the specifications described on

page 13. To purchase a surge suppressor call

the telephone number on the front cover of

this manual.

13. Failure to use a properly functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See

TROUBLESHOOTING on page 29 if the tread-

mill is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 15).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

WARNING: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

8. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

9. The pulse sensor is not a medical device.

Various factors, including the user's move-

ent, may affect the accuracy of heart rate

readings. The pulse sensor is intended only

as an exercise aid in determining heart rate

trends in general.

20. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and press the power switch

into the off position when the treadmill is not

in use. (See the drawing on page 5 for the lo-

cation of the power switch.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADMILL on page 27.) You

must be able to safely lift 45 lbs. (20 kg) to

raise, lower, or move the treadmill.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. When folding or moving the treadmill, make

ure that the storage latch is holding the

frame securely in the storage position.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. Never insert or drop any object into any

opening on the treadmill.

26.

DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the main-

tenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized service

representative only.

27. The treadmill is intended for in-home use

only. Do not use the treadmill in any commer-

cial, rental, or institutional setting.

28. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the revolutionary NordicTrack

T7.3 t

readmill. The T7.3 treadmill offers a selection of

features designed to make your workouts at home

more enjoyable and effective. And when youʼre not ex-

ercising, the unique treadmill can be folded up, requir-

ing less than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please familiarize yourself with

the parts that are labeled in the drawing below.

BEFORE YOU BEGIN

Handrail

Console

Fan

Key/Clip

Power Switch

Walking Belt

Foot Rail

Power Cord

Platform Cushion

Wheel

Idler Roller

Adjustment Bolts

Accessory Tray

Pulse Sensor

ASSEMBLY

ssembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of

the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-

cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver and

adjustable wrench .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-

aging parts, do not use power tools for assembly. Extra hardware may be included.

#8 x 3/4"

Screw (1)–12

#10 Star

Washer (3)–2

5/16" Star

Washer (4)–4

3/8" Nut (5)–5

#8 x 5/8"

Screw (7)–8

#8 x 1" Tek

Screw (8)–6

3/8" Star

Washer (18)–4

#8 x 1/2" Ground

Screw (16)–1

Base Foot

Spacer (87)–6

3/8" x 2" Bolt (2)–3

3/8" x 2 3/4" Bolt (6)–2

3/8" x 2 3/8" Bolt (10)–4

#10 x 1/2"

Bolt (11)–2

5/16" x 4" Bolt (12)–4

2. Attach a Wheel (92) to the indicated Extension

Leg (90) with a 3/8" x 2 3/4" Bolt (6) and a 3/8"

Nut (5). Do not overtighten the Nut; the

Wheel must turn freely.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully tip

he treadmill onto its side as shown. Partially

fold the Frame (54) so the treadmill is more sta-

le. Do not fully fold the Frame until the

treadmill is completely assembled.

Attach six Base Feet (88) and six Base Foot

Spacers (87) to the Base (85) and the Extension

Legs (90) in the locations shown with six #8 x 1"

Tek Screws (8). Do not overtighten the Tek

Screws.

3. Identify the Right Upright (112), which is marked

with a sticker. Have a second person hold the

Right Upright near the Base (85) as shown.

lide the Right Base Cover (119) onto the end

of the Right Upright.

See the inset drawing. Tie the wire tie in the

Right Upright (112) securely around the end of

the Wire Harness (79). Then, pull the other end

of the wire tie until the Wire Harness is routed

completely through the Right Upright.

119

Wire

Tie

4. Have a second person hold the Right Upright

(112) against the Base (85), with the bend in the

Right Upright positioned as shown. Be careful

not to pinch the Wire Harness (79).

Attach the Right Upright (112) to the Base (85)

with two 3/8" x 2 3/8" Bolts (10) and two 3/8"

Star Washers (18); do not fully tighten the

Bolts yet.

Bend

112

5. Slide the Right Base Cover (119) over the Base

(85). Attach the Right Base Cover with three #8

x 3/4" Screws (1). Do not overtighten the

Screws.

119

112

Wire Tie

112

6. With the help of a second person, carefully tip

the treadmill onto its side as shown. Partially

fold the Frame (54) so the treadmill is more sta-

le. Do not fully fold the Frame until the

treadmill is completely assembled.

Have a second person hold the Left Upright

(111) against the Base (85), with the bend in the

Left Upright positioned as shown. Slide the Left

Base Cover (118) onto the end of the Left

Upright.

Attach the Left Upright (111) to the Base (85)

with two 3/8" x 2 3/8" Bolts (10) and two 3/8"

Star Washers (18); do not fully tighten the

Bolts yet.

Attach a Wheel (92) to the indicated Extension

Leg (90) with a 3/8" x 2 3/4" Bolt (6) and a 3/8"

Nut (5). Do not overtighten the Nut; the

Wheel must turn freely.

111

Bend

8. Set the console assembly face down on a soft

surface to avoid scratching the console assem-

bly.

Identify the Left Accessory Tray (93) and the

Right Accessory Tray (94), which are marked

with an "L" and an "R" on the bottom.

Attach the Left and Right Accessory Trays (93,

94) to the console assembly with eight #8 x 5/8"

Screws (7). Do not overtighten the Screws.

Console

Assembly

7. Slide the Left Base Cover (118) over the Base

(85). Attach the Left Base Cover with three #8 x

3/4" Screws (1). Do not overtighten the

Screws.

With the help of a second person, tip the tread-

mill so that the Base (85) is flat on the floor.

118

9. Hold the Right Handrail (107), which is labeled

with a sticker, near the console assembly. Insert

the console wire into the hole in the side of the

ight Handrail.

ttach the Console Ground Wire (102) to the

bracket on the Right Handrail (107) with the #8 x

1/2" Ground Screw (16).

Set the Handrails (106, 107) on the console as-

sembly. Start four #8 x 3/4" Screws (1) into the

Handrail; do not fully tighten the Screws yet.

Be careful not to pinch the console wire.

Console

Assembly

Console

Wire

107

106

10. Partially tighten two #8 x 3/4" Screws (1) into

the Left and Right Handrails (106, 107); do not

fully tighten the Screws yet.

Tighten two #10 x 1/2" Bolts (11) with two #10

Star Washers (3) into the Left and Right

Handrails (106, 107).

See assembly steps 9 and 10. Tighten the six

#8 x 3/4" Screws (1). Do not overtighten the

Screws.

Console

Assembly

107

106

11. Hold a Handrail Spacer (77) near the top of the

Right Upright (112) as shown. Insert the Wire

Harness (79) through the large hole in the cen-

er of the Handrail Spacer.

ave a second person hold the console assem-

bly near the Right Upright (112).

Connect the Wire Harness (79) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY

BE DAMAGED WHEN THE POWER IS

TURNED ON. Then, remove the wire tie from

the Wire Harness.

onsole

Wire

Tie

12. Have a second person set the console assem-

bly on the Handrail Spacer (77) and the Right

Upright (112) as you insert the wires into the

Right Upright.

Partially tighten two 5/16" x 4" Bolts (12) with two

5/16" Star Washers (4) into the Right Upright

(112) and the Right Handrail (107); do not

tighten the Bolts yet.

Repeat this step on the left side of the tread-

mill. Then, fully tighten the four 5/16" x 4"

Bolts (12).

Console

Assembly

Wires

112

Console

Wire

107

Console

Assembly

15. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys

in a secure place. A hex key is used to adjust the walking belt (see pages 30 and 31). To protect the floor or

carpet from damage, place a mat under the treadmill.

13. Raise the Frame (54) to the position shown.

Have a second person hold the Frame until

this step is completed.

rient the Storage Latch (80) so that the Latch

Bracket (89) and the Latch Knob (81) are ori-

ented as shown.

ttach the Latch Bracket (89) and the Storage

Latch (80) to the Base (85) with two 3/8" x 2"

Bolts (2) and two 3/8" Nuts (5).

Attach the upper end of the Storage Latch (80)

to the bracket on the Frame (54) with a 3/8" x 2"

Bolt (2) and a 3/8" Nut (5). Note: It may be nec-

essary to move the Frame back and forth to

align the Storage Latch with the bracket.

Lower the Frame (54) (see HOW TO LOWER

THE TREADMILL FOR USE on page 28).

14. With the help of a second person, carefully

lower the Uprights (111, 112). Firmly tighten the

four 3/8" x 2 3/8" Bolts (10). Then, raise the

Uprights to the vertical position.

112

111

OPERATION AND ADJUSTMENT

HE PRE-LUBRICATED WALKING BELT

Your treadmill features a walking belt coated with high-

performance lubricant. IMPORTANT: Never apply sil-

cone spray or other substances to the walking

belt or the walking platform. Such substances will

cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like other electronic equipment, can be

damaged by sudden voltage changes in your homeʼs

power. To decrease the risk of damaging your

treadmill, always use a surge suppressor with your

treadmill (see drawing 1 at the right). To purchase

a surge suppressor, see precaution 11 on page 3.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have a

UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly functioning surge suppressor could dam-

age the control system of the treadmill (see precau-

tion 12 on page 3).

This product must be grounded. If it should malfunc-

tion or break down, grounding provides a path of least

resistance for electric current to reduce the risk of elec-

tric shock. This productʼs power cord has an equip-

ment-grounding conductor and a grounding plug. Plug

the power cord into a surge suppressor, and plug

the surge suppressor into an appropriate outlet

hat is properly installed and grounded in accor-

dance with all local codes and ordinances.

IMPORTANT: The treadmill is not compatible with

GFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit

(see drawing 1). A temporary adapter may be used to

connect the surge suppressor to a 2-pole receptacle if

a properly grounded outlet is not available (see draw-

ing 2).

The temporary adapter should be used only until a

properly grounded outlet (see drawing 1) can be in-

stalled by a qualified electrician.

The green-colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent

ground such as a properly grounded outlet box cover.

The adapter must be held in place by a metal screw.

Some 2-pole receptacle outlet box covers are not

grounded. Contact a qualified electrician to deter-

mine if the outlet box cover is grounded before

using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor in-

creases the risk of electric shock. Check with

a qualified electrician or serviceman if you

are unsure whether the product is properly

grounded. Do not modify the plug—if it will

not fit the outlet, have a proper outlet in-

stalled by a qualified electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Grounding Plug

FEATURES OF THE CONSOLE

The revolutionary treadmill console offers a selection

of features designed to make your workouts more ef-

fective and enjoyable. When you use the manual mode

of the console, you can change the speed and incline

of the treadmill with the touch of a button. As you exer-

cise, the console will display continuous exercise feed-

back. You can even measure your heart rate using the

handgrip pulse sensor.

In addition, the console features sixteen preset work-

outs—eight weight loss workouts and eight perfor-

mance workouts. Each workout automatically controls

the speed and incline of the treadmill as it guides you

through an effective exercise session. You can also

create up to four of your own custom workouts and

save them for future use. You can even compete

against animated runners using the iFit Competition

Training workout.

The console features an iFit Fitness Journal, which au-

tomatically records and stores your exercise informa-

tion so that you can view your workout history and track

your progress.

The console also features the iFit interactive workout

system. The iFit system accepts iFit cards with work-

outs that help you achieve specific fitness goals. For

example, lose unwanted pounds with the 8-week

Weight Loss workout. iFit workouts automatically con-

trol the treadmill. iFit cards are available separately. To

purchase iFit cards at any time, go to www.iFit.com

or call the telephone number on the front cover of

this manual. iFit cards are also available at select

stores.

You can even listen to your favorite workout music or

audio books with the consoleʼs premium stereo sound

system while you get in shape.

To turn on the power, see page 15. To personalize

console settings, see page 15. To personalize equal-

izer settings, see page 16. To use the manual mode,

see page 16. To use a preset workout, see page 18.

To create and use a custom workout, see pages 20

and 21. To use an iFit Competition Training work-

out, see page 22. To use an iFit card, see page 24.

To view the iFit fitness journal, see page 25. To use

the stereo sound system, see page 25. To use the

information mode, see page 26.

Clip

Key

CONSOLE

IAGRAM

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to

old temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

o this, you may damage the console displays or

other electrical components.

Plug in the power cord (see

page 13). Next, locate the

power switch on the tread-

mill frame near the power

cord. Make sure that the

switch is in the reset posi-

tion.

IMPORTANT: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as

you plug in the power cord and press the power

switch into the reset position, the demo mode is

turned on. To turn off the demo mode, hold down

the Stop button for a few seconds. If the displays

remain lit, see THE INFORMATION MODE on page

26 to turn off the demo mode.

Next, stand on the foot rails of the treadmill. Find the

clip attached to the key (see the drawing on page 14)

and slide the clip onto the waistband of your clothes.

Then, insert the key into the console. After a moment,

the displays will light. IMPORTANT: In an emergency

situation, the key can be pulled from the console,

causing the walking belt to slow to a stop. Test the

clip by carefully taking a few steps backward; if the

key is not pulled from the console, adjust the posi-

tion of the clip.

Note: If there is a sheet of clear plastic on the face

of the console, remove the plastic. To prevent dam-

age to the walking platform, wear clean athletic

shoes while using the treadmill. The first time you

use the treadmill, observe the alignment of the

walking belt, and center the walking belt if neces-

sary (see page 31).

Note: The console can display speed and distance in

either miles or kilometers. To find out which unit of

measurement is selected or to change the unit of mea-

surement, see THE INFORMATION MODE on page

26. For simplicity, all instructions in this section refer to

miles.

HOW TO PERSONALIZE CONSOLE SETTINGS

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

hen, slide your finger across the screen to begin.

The main menu will appear on the screen. Slide

your finger across the screen to scroll through the

main menu or other menus. When you reach either

end of the menu, a small dot will appear on the

screen. To select a menu item, press the screen

near the item. Press the Home button to return to

the main menu at any time. Press the Back button

to return to the previous screen.

2. Select the settings mode.

To select the settings mode, scroll through the

main menu and press SETUP.

3. Set user weight.

Press SET USER WEIGHT. A cursor will appear

below the weight. Weights are measured in

pounds. To enter a number above the cursor,

press the numbered buttons on the screen. The

cursor will then move to the next number. When

you are finished entering your weight, press

ENTER. Note: To enter a weight less than 100

pounds, press 0 for the first number. You cannot

enter a user weight greater than the maximum user

weight for the treadmill (see page 3).

4. Reset the calendar.

Press RESET CALENDAR. To delete all of the

saved workout information, press YES. To save

the information, press NO. After you have pressed

YES, you can press the screen within eight sec-

onds to cancel the reset.

Reset

5. Set the date and time.

Setting the date and time will allow the console to

ecord your workout history accurately in the fit-

ness journal.

To set the date and time, press SET DATE &

TIME. Press the information you wish to change.

Then, press the increase and decrease buttons

until the desired information appears. Repeat this

step to change all desired information. When you

are finished, press DONE.

6. Turn on or turn off the display demo mode.

The console features a display demo mode, de-

signed to be used if the treadmill is displayed in a

store. To turn on or turn off the display demo

mode, scroll through the setup menu and press

DEMO ON/OFF. Press the screen to turn on or

turn off the display demo mode. When you are fin-

ished, press the Back button. See THE INFORMA-

TION MODE on page 26 for information on the dis-

play demo mode.

To exit the settings mode, press the Home button.

HOW TO PERSONALIZE EQUALIZER SETTINGS

Press the Home button to return to the main menu.

Press EQUALIZER. Scroll through the settings and

press the desired setting.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

hen, slide your finger across the screen to begin.

The main menu will appear on the screen (see

step 1 on page 15).

2. Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET-

TINGS on page 15.

3. Select the manual mode.

To select the manual mode, scroll through the

main menu and press the screen near the word

MANUAL.

4. Start the walking belt and adjust the speed.

To start the walking belt, press the Start button, the

Speed increase button, or one of the 1 Step Speed

buttons numbered 1 to 12. Note: After you press

button, it may take a moment for the walking belt to

reach the selected speed setting.

If you press the Start button or the Speed increase

button, the walking belt will begin to move at 1

mph. As you exercise, change the speed of the

walking belt as desired by pressing the Speed in-

crease and decrease buttons. Each time you press

a button, the speed setting will change by 0.1 mph;

if you hold down a button, the speed setting will

change in increments of 0.5 mph. If you press one

of the numbered 1 Step Speed buttons, the speed

of the walking belt will gradually change until it

reaches the selected speed setting.

To pause the walking belt, press the Stop button.

To restart the walking belt, press the Start button,

the Speed increase button, or one of the numbered

1 Step Speed buttons.

5. Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the

ncline increase or decrease buttons, or one of the

1 Step Incline buttons numbered 0 to 12. Each

ime you press a button, the incline will gradually

change until it reaches the selected incline setting.

6. Follow your progress with the screen.

The console offers several display options. The dis-

play option you select will determine which workout

information is shown. Slide your finger across the

screen to scroll to the desired display option.

As you walk or run on the treadmill, the screen can

show the following workout information:

• The elapsed time.

• The distance that you have walked or run.

• The approximate number of calories you have

burned.

• The speed of the walking belt.

• The incline level of the treadmill.

• Your pace in minutes per mile or kilometer.

• Your heart

ate. Note:

Your heart

ate can be

displayed

only while

you use the handgrip pulse sensor (see step 7 on

page 18). If you wish to see your heart rate for

more than 40 seconds, select the display option

shown above.

Note: Regardless of which display option you se-

lect, the speed or incline setting will appear on the

screen for a few seconds each time you change the

setting.

As you exercise, the workout intensity level bar will

indicate the approximate intensity level of your ex-

ercise.

Workout Intensity Level Bar

7. Measure your heart rate if desired.

Before using

he handgrip

pulse sensor,

emove the

sheets of

clear plastic

from the metal

contacts. In

addition,

make sure that your hands are clean.

To measure your heart rate, stand on the foot

rails and hold the metal contacts on the handrail—

avoid moving your hands. When your pulse is de-

tected, your heart rate will be shown. For the most

accurate heart rate reading, continue to hold

the contacts for about 15 seconds.

8. Turn on the fan if desired.

The console features an adjustable speed fan.

Press the Fan button repeatedly to select a fan

speed or to turn off the fan. Note: If the fan is on

when the walking belt is stopped, the fan will turn

off automatically after a few minutes.

9. When you are finished exercising, remove the

key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to the lowest

setting. The incline must be at the lowest setting

when you fold the treadmill to the storage posi-

tion or you may damage the treadmill. Next, re-

move the key from the console and put it in a secure

place.

When you are finished using the treadmill, press

the power switch into the off position and unplug

the power cord. IMPORTANT: If you do not do

this, the treadmillʼs electrical components may

wear prematurely.

HOW TO USE A PRESET WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

hen, slide your finger across the screen to begin.

The main menu will appear on the screen (see

step 1 on page 15).

2. Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET-

TINGS on page 15.

3. Select a weight loss workout or a performance

workout.

To select a preset workout, scroll through the main

menu and press the screen near the words

WEIGHT LOSS or the word PERFORMANCE.

Then, slide your finger across the screen until the

name of the desired preset workout appears on the

screen. Press the desired workout.

When you se-

lect a weight

loss workout or

a performance

workout, the

screen will

show the name, the maximum incline setting, the

total time, and the maximum speed setting of the

workout. In addition, a profile of the speed settings

of the workout and the approximate number of

calories that will be burned during the workout will

appear on the screen.

Favorite workouts allow you to access two work-

outs with the touch of a button. To set a workout as

one of your favorites, press the plus sign in the

upper right corner of the screen. Then, press the 1

or the 2 on the screen to replace the old favorite

workout 1 or 2 with the current workout. To easily

return to a favorite workout at any time, press one

of the Favorite buttons on the console.

ontacts

Each preset workout is divided into one-minute

segments. One speed setting and one incline set-

ting are programmed for each segment. Note: The

ame speed and/or incline setting may be pro-

grammed for consecutive segments.

4. Start the walking belt.

Press the Start button to start the workout. A mo-

ment after you press the button, the treadmill will

automatically adjust to the first speed and incline

settings of the workout. Hold the handrails and

begin walking.

During the program, the profile will show your

progress. The flashing segment of the profile repre-

sents the current segment of the program. The

height of the flashing segment indicates the speed

setting for the current segment. At the end of each

segment, a series of tones will sound and the next

segment of the profile will begin to flash. If the

speed and/or incline is about to change, the speed

and/or incline setting will appear on the screen to

alert you. The treadmill will then automatically ad-

just to the speed and/or incline settings for the next

segment.

The program will continue in this way until the last

segment of the profile flashes and the last segment

ends. The walking belt will then slow to a stop.

If the speed or incline setting for the current seg-

ment is too high or too low, you can manually over-

ride the setting by pressing the speed and incline

buttons; however, when the current segment of

the program ends, the treadmill will automati-

cally adjust to the speed and incline settings for

he next segment.

o pause the program at any time, press the Stop

button. To restart the program, press the Start but-

ton or the Speed increase button. The walking belt

will begin to move at 1 mph. When the next seg-

ment of the program begins, the treadmill will auto-

matically adjust to the speed and incline settings for

the next segment.

5. Follow your progress with the screen.

See step 6 on page 17. Note: Preset workouts offer

three display options. Instead of displaying pace,

the screen will show your exercise intensity in

METs. One MET is the amount of energy you use

while resting.

6. Measure your heart rate if desired.

See step 7 on page 18.

7. Turn on the fan if desired.

See step 8 on page 18.

8. When you are finished exercising, remove the

key from the console.

See step 9 on page 18.

HOW TO CREATE A CUSTOM WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 15.

hen, slide your finger across the screen to begin.

The main menu will appear on the screen (see step

1 on page 15).

2. Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET-

TINGS on page 15.

3. Select a custom workout.

To select a custom workout, scroll through the

main menu and press the screen near the word

CUSTOM. Then, slide your finger across the

screen until the name of the desired custom work-

out appears on the screen. Press the desired work-

out.

When a custom workout is selected, the screen will

show the name, total time, maximum incline set-

ting, and maximum speed setting of the workout. In

addition, a profile of the speed settings of the work-

out will appear on the screen.

If the custom workout has not yet been defined,

the screen will show a workout time of forty

minutes and a flat profile. If the workout time is

not forty minutes or the profile is not flat, see

HOW TO USE A CUSTOM WORKOUT on page

21.

Each custom workout is divided into one-minute

segments. One speed setting and one incline set-

ting can be programmed for each segment.

4. Start the walking belt.

Press the Start button to start the workout. A mo-

ment after you press the button, the walking belt

will begin to move. Hold the handrails and begin

walking.

o program a speed setting and an incline setting

for the first one-minute segment of the workout,

imply adjust the speed and incline of the treadmill

as desired by pressing the speed and incline but-

tons.

When the first segment ends, a series of tones will

sound and the current speed and incline settings

will be saved in memory.

Program a speed setting and an incline setting for

the second segment as described above. Continue

programming speed and incline settings for up to

40 segments.

When you are finished programming your workout,

press the Stop button twice. The custom workout

will then be saved in memory.

5. Follow your progress with the screen.

See step 5 on page 19.

6. Measure your heart rate if desired.

See step 7 on page 18.

7. Turn on the fan if desired.

See step 8 on page 18.

8. When you are finished exercising, remove the

key from the console.

See step 9 on page 18.

Page is loading ...

NordicTrack NCTL17810.0 User manual

Brand: NordicTrack

Model: NCTL17810.0

Category: Treadmills

Type: User manual

This manual is also suitable for

T7.3 Treadmill

Download PDF

report

NordicTrack NCTL17810.0 User manual

This manual is also suitable for

NordicTrack NCTL17810.0 User manual

Related papers

Other documents