Olympus TG-625 Owner's manual

DIGITAL CAMERA

Instruction Manual

TG-625

● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these

instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for

future reference.

● We recommend that you take test shots to get accustomed to your camera before taking important photographs.

● In the interest of continually improving products, Olympus reserves the right to update or modify information

contained in this manual.

2

EN

Checking the contents of the box

or

Digital camera Strap Lithium Ion

Battery

(LI-50B)

USB-AC adapter (F-2AC) USB cable

(CB-USB8)

OLYMPUS Setup

CD-ROM

Names of Parts

2

1

3

4

7

6

5

9

8

10

11

12

4

13

1

Connector cover

2 Strap eyelet

3

Connector cover latch

4 Lock knob

5 Multi-connector

6 HDMI micro connector

7 Microphone

8 Flash

9

Self-timer lamp/LED illuminator/

AF illuminator

10

Lens

11

Battery/card cover latch

12

Tripod socket

13

Battery/card cover

Other accessories not shown: Warranty card

Contents may vary depending on purchase location.

3

EN

1

2

3

4

6

7

10

11

8

9

5

1 Indicator lamp

2

Speaker

3 n button

4 Monitor

5 Shutter button

6 Zoom lever

7 Movie record button

8 q button (switching between

shooting and playback)

9  button

10

E button (camera guide)

11 Joystick

INFO (changing information

display)

 (erase)

A button (OK)

Attaching the camera strap

Pull the strap tight so that it does not come

loose.

Joystick

H (left)

G (down)

F (up)

I (right)

Press the joystick up/down/left/right to operate it.

FGHI instruct to press the joystick up/down/left/

right.

4

EN

Inserting and removing the battery

and card

1

Follow Steps 1, 2 and 3 to open the

battery/card cover.

3

1

2

Lock knob

Battery/card cover

Battery/card

cover latch

Turn off the camera before opening the battery/card

cover.

2

Insert the battery while sliding the battery

lock knob in the direction of the arrow.

Battery lock knob

Insert the battery as illustrated with the B mark

toward the battery lock knob.

Damage to the battery exterior (scratches, etc.) may

produce heat or an explosion.

Slide the battery lock knob in the direction of the

arrow to unlock, and then remove the battery.

3

Insert the card straight until it clicks into

place.

Write-protect switch

Always use SD/SDHC/SDXC cards or Eye-Fi card

with this camera. Do not insert other types of memory

cards. “Using the card” (p. 58)

Do not touch the metallic parts of the card directly.

To remove the card

12

Press the card in until it clicks and comes out slightly, then

remove the card.

4

Follow Steps 1 and 2 to close the battery/

card cover.

2

1

When using the camera, be sure to close and lock

the battery/card cover.

5

EN

Charging the battery

Connect the USB cable and USB-AC adapter to the

camera and charge the battery.

The battery is not fully charged at shipment. Before

use, be sure to charge the battery until the indicator

lamp turns off (up to 3 hours).

Connecting the camera

AC outlet

USB cable

(supplied)

Connector cover

Multi-connector

When using the camera, be sure to close and lock

the connector cover.

Indicator lamp

On: Charging

Off: Charged

When to charge the batteries

Charge the battery when the error message shown below

appears.

Battery Empty

Error message

Flashes in red

The included F-2AC USB-AC adapter (hereafter

referred to as USB-AC adapter) differs depending

on the region where you purchased the camera. If

you received a plug-in type USB-AC adapter, plug it

directly into AC outlet.

6

EN

The included USB-AC adapter has been designed

to be used for charging and playback. Do not take

pictures while the USB-AC adapter is connected to

the camera.

Be sure to unplug the power plug of the USB-AC

adapter from the wall outlet when the charging is

complete or the playback ends.

For details on the battery, see “Battery Handling

Precautions” (p. 63). For details on the USB-AC

adapter, see “USB-AC adapter” (p. 64).

If the indicator lamp does not light, check the USB

cable and USB-AC adapter connections.

The battery can be charged while the camera is

connected to the computer via USB. The charging

time varies depending on the performance of the

computer. (There may be cases in which it takes

approx. 10 hours.)

7

EN

Turning on the camera and making

the initial settings

When you turn on the camera for the ﬁ rst time, a screen

appears enabling to set the language for the menus and

messages displayed in the monitor, and the date and time.

1

Press the n button to turn on the

camera, press the joystick to FGHI to

select your language and press the A button.

2

Press the joystick to FG to select the year

for [Y].

X

MENU

Back

Y/M/D

YMDTime

-- --

--

:..

2012

Date and time setting screen

3

Press the joystick to I to save the setting

for [Y].

X

MENU

Back

Y/M/D

Y M D Time

-- --

--

:..

2012

4

As in Steps 2 and 3, press the joystick to

FGHI to set [M] (month), [D] (day), [Time]

(hours and minutes), and [Y/M/D] (date order),

and then press the A button.

For precise time setting, press the A button as the

time signal strikes 00 seconds.

5

Press the joystick to HI to select the [x]

time zone and then press the A button.

●

Use FG to turn daylight saving time ([Summer])

on or off.

MENU

’12.10.26 12:30 Back

Summer

Seoul

Tokyo

8

EN

Learning how to use the camera

● Press the n button to turn on the camera and

enter the standby mode. (Press the n button

again to turn off the camera.)

● Select the shooting mode, and press the shutter

button to shoot a still image.

● To shoot a movie, press the R button.

● Set the shooting functions using the function menu or

the setup menu.

● To view images, press the q button to switch to

playback mode.

● Set the playback functions using the setup menu.

● To return to standby mode, press the q button

again, or press the shutter button halfway down and

then release it.

● Press and hold the q button while the camera is

turned off to start up the camera in the playback mode.

● In this case, pressing the q button again sets the

camera to the standby mode.

Using the camera guide

Use the camera guide to look up camera operations.

1

Press the E button in the standby mode

screen or the playback screen.

Search by

purpose

Search by

purpose

Search for a

solution

Learn about the

camera

History

Search by

situation

Search by

keyword

Exit

Submenu 2 Application

Search by

purpose

Functions or operating methods can

be searched.

Search for a

solution

A solution can be searched when

having problems during operation.

Search by

situation

Search from shooting/playback

scene.

Learn about the

camera

Information is shown about

recommended functions and basic

operating methods for the camera.

Search by

keyword

Search from the camera keyword.

History

Searches can be performed from the

search history.

2

Use FGHI to select the desired item, and

press the A button.

●

Follow the on-screen instructions to search the

desired contents.

9

EN

Shooting still images

1

Press the n button to turn on the camera.

2

Select the shooting mode. (p. 11)

3

Hold the camera and compose the shot.

When holding the camera, take care not to cover the

ﬂ ash, microphone or other important parts with your

ﬁ ngers, etc.

4

Press the shutter button halfway down to

focus.

Press halfway

PP

F3.9F3.91/4001/400

Shutter speed

AF target mark

Aperture value

The camera was unable to focus if the AF target mark

ﬂ ashes red. Try focusing again.

5

To take the picture, gently press the shutter

button all the way down while being careful

not to shake the camera.

Press halfway

Press fully

Using the zoom

Pressing the zoom lever adjusts the shooting range.

W side T side

Image size Zoom bar

12M

Optical zoom

Other

*1

Due to increased processing of the pixel counts, the

image quality will not degrade. The magniﬁ cation ratio

changes depending on the image size setting.

The zoom position is locked when [a Super Macro]

or [N S-Macro LED] (p. 21) is selected.

10

EN

Shooting screen displays

F3.9F3.91/1001/100

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

12

M

PP

00:3400:34

zz

DATE

44

N

ORM

1

2

3

4

5

6

7

8

9

10

161819

20

17 111415 13

21

22

23

24

252627

12

When the shutter button is pressed halfway down

Reading a histogram

If the peak ﬁ lls too much of the frame,

the image will appear mostly white.

If the peak ﬁ lls too

much of the frame,

the image will appear

mostly black.

The green section shows

luminance distribution

within the screen’s center.

No. Name Normal Detailed No info.

1 Shooting mode

RR

–

2 Flash

RR

–

3 Macro

RR

–

4 Self-timer

RRR

5 Exposure

compensation

RR

–

6 White balance

RR

–

7 ISO sensitivity

RR

–

8 Drive

RR

–

9 Image size (still

images)

RR

–

10 Recording with

sound/wind noise

RR

–

11 Image size (movies)

RR

–

12 Movie recording

length

RR

–

13 Movie recording icon

RR

–

14 World time

–

R

–

15 Image stabilization

–

R

–

16 Metering

–

R

–

17 Date stamp

RR

–

18 Compression

RR

–

19 Number of storable

still pictures

RR

–

20 Current memory

RR

–

21 Battery check

RR

–

22 Histogram

–

R

–

23 AF target mark

RRR

24 Grid Guide

–

R

–

25 Aperture value

RRR

26 Shutter speed

RRR

27 Camera shake

warning

RRR

Switching the displays

The displays change in the order of Normal → Detailed → No info. each time F (INFO) is pressed.

11

EN

Selecting the shooting mode

The default settings of the function are highlighted in .

Shooting mode Submode

P (P mode)

–

M (M mode) –

Q (Q mode)

Recommended/Set 1/Set 2/Set 3

 ( mode)

B Portrait

/

F Landscape/

G Night Scene/

M

Night+Portrait/C Sport/N Indoor/W Candle/

R

Self Portrait/

S

Sunset/X Fireworks/V Cuisine/d Documents/q Beach & Snow/

M Snapshot/U Pet Mode - Cat/t Pet Mode - Dog/h Backlight HDR*

1

P (P mode) Pop Art/Pin Hole/Fish Eye/Drawing/Soft Focus/Punk/Sparkle/Watercolor/Reﬂ ection/Miniature/

Fragmented/Dramatic

p (Panorama mode)

Auto/Manual/ PC

*

1

When set to [h Backlight HDR], [Image Size] is limited to [n] or lower. This is recommended for shooting a ﬁ xed

subject.

“List of settings available in each shooting mode” (p. 53), “List of  settings” (p. 54), “List of P settings” (p. 56)

1

Press the joystick to HI in the standby

mode screen to select the shooting mode.

●

To select the Q, , P and p

submodes, press the joystick to G ﬁ rst to display

the submodes, then press the joystick to HI to

select the submode, and press the Q button.

MENUMENU

12

M

Scene Mode

To select a submode

MENUMENU

12

M

Portrait

N

ORM

44

00:3400:34

12

M

Icon indicating the submode

that is set

12

EN

Learning about the shooting modes

P (P mode)

The camera will select the appropriate aperture value

and shutter speed for the subject. Changes can also be

made to various shooting settings, such as exposure

compensation, as needed.

M (M mode)

The camera will automatically select the optimal shooting

mode for the scene. The shooting condition is decided by

the camera and settings cannot be changed, excepting

some functions.

Q (Q mode)

You can shoot with Beauty Fix effects.

1

Point the camera toward the subject. Check

the frame appearing around the face detected

by the camera, and then press the shutter

button to take the picture.

2

To save the image, select [OK] on the review

screen and press the Q button. To retouch

the image additionally, select [Beauty Fix].

OK

Beauty Fix

MENU

Back

Beauty Fix

1 Use FGHI to select a retouching item, and press

the Q button.

MENU

Off

Eye Color Back

2 Check the retouched effects on the review screen,

then press the Q button to start the retouch process

and save.

● Settings for Beauty Fix can be registered.

Depending on the picture, the editing may not be

effective.

13

EN



(

mode

)

You can shoot with the best mode for the subject and

shooting scene. The best shooting settings for various

scenes are pre-programmed as submodes. Note that

functions may be limited in some modes.

Refer to the descriptions displayed on the submode

selection screen, and select the desired submode.

To take underwater photos

The [M Snapshot] submode is recommended for

shooting underwater.

In the [M Snapshot] submode, you can press the A

button to ﬁ x the focus distance (AF lock).

Press the A button again to cancel the AF lock.

AF lock mark

0.00.0

AF LOCKAF LOCK

12

M

44

00:3400:34

N

ORM

P (P mode)

You can shoot with special effects.

Refer to the sample images displayed on the submode

selection screen, and select the desired submode.

The best shooting settings for each effect are pre-

programmed, so some function settings cannot be

changed.

Note that some effects may not be applied to movies.

0.00.0

AUTO

WB

AUTO

WB

N

ORM

44

00:3400:34

12

M

1

Icon indicating

P

mode

that is set

14

EN

p (Panorama mode)

You can shoot and combine multiple images to create an

image with a wide angle of view (panoramic image).

Taking pictures with [Auto]

1 Press the shutter button to take the ﬁ rst frame.

2 Move the camera slightly in the direction of the second

frame.

Target mark

Pointer

Screen when combining images

from left to right

AUTOAUTO

MENU OK

SaveCancel

3 Move the camera slowly so that the pointer and the

target mark overlap. The camera releases the shutter

automatically when the pointer and the target overlap.

To combine only two frames, press the A button.

4 Repeat step 3 to take a third frame. The camera

automatically combines the frames into a single

panorama image.

To cancel the panorama function, press the 

button.

If the shutter does not automatically release, try

[Manual] or [PC].

Move the camera so that it rotates horizontally

around the center of the lens to take better panorama

images.

Taking pictures with [Manual]

1 Use FGHI to specify at which edge the next

picture is to be connected.

Direction for combining

frames

MANUALMANUAL

2 Press the shutter button to take the ﬁ rst frame.

3 Compose the next shot so that the edge of the ﬁ rst

frame displayed faintly on the screen overlaps the

subject of the second frame, and press the shutter

button.

To combine only two frames, press the A button.

4 Repeat step 3 to take a third frame. The camera

automatically combines the frames into a single

panorama image.

Taking pictures with [PC]

1 Use FGHI to select the direction that the frames

are combined.

2 Press the shutter button to take the ﬁ rst frame. The

edge of the ﬁ rst frame is displayed faintly on the

screen.

3 Compose the next shot so that the edge of the ﬁ rst

frame displayed faintly on the screen overlaps the

subject of the second frame, and press the shutter

button.

4 Repeat step 3 until the desired number of frames are

taken, and then press the A button or  button

when ﬁ nished.

Panorama shooting is possible for up to 10 frames.

The shot images are combined into a single panorama

image by the PC software.

For details on installing the PC software, refer to

(p. 40). In addition, refer to the PC software help guide

for details on how to make panorama images.

15

EN

Viewing images

1

Press the q button.

Number of frames/

Total number of images

12:30’12/10/26’12/10/26 12:30

4/30

Playback image

Pictures taken using Q mode or sequential

shooting function are displayed as a group. Press the

zoom lever to the T side to play back the image in the

group.

2

Use HI to select an image.

Displays

Displays next

image

Hold I to fast forward and hold H to reverse.

Press the q button again to return to the shooting

screen.

Index view and close-up view

Index view enables quick selection of a desired image.

Close-up view (up to 10× magniﬁ cation) allows checking

of image details.

1

Press the zoom lever.

12:30’12/10/26’12/10/26 12:30

4/30

12:30

’12/10/26’12/10/26 12:30

4/30

WT

W

T

’12/10/26 12:30

Single-image view Close-up view

Index view

To select an image in index view

Use FGHI to select an image, and press the A

button to display the selected image in single-image view.

To scroll an image in close-up view

Use FGHI to move the viewing area.

16

EN

Playing back panorama images

Panorama images that were combined together using

[Auto] or [Manual] can be scrolled for viewing.

1

Select a panorama image during playback.

4/304/30

OK

Replay

’12/10/26 12:30

2

Press the A button.

Viewing area

To control panorama image playback

Stop playback: Press the  button.

Pause: Press the A button.

Control while paused

Press FGHI to scroll the image in the direction of

the pressed button.

Press the zoom lever to enlarge/shrink the image.

Press the A button to restart scrolling.

17

EN

Playback mode display

● Normal

No. Name Normal Detailed No info.

1 Battery check

RRR

2 Eye-Fi transfer

data

RR

–

3 Protect

RR

–

4 Adding sound

RR

–

5 Upload order

RR

–

6 Print

reservation/

number of

prints

RR

–

7 Current

memory

RR

–

8 Frame

number/total

number of

images

RR

–

9 P mode

–

R

–

10 Shutter speed

–

R

–

11 Shooting

mode

–

R

–

12 ISO sensitivity

–

R

–

13 Aperture value

–

R

–

14 Histogram

–

R

–

15 Exposure

compensation

–

R

–

16 Shadow

adjustment

technology

–

R

–

17 White balance

–

R

–

18 File name

–

R

–

19 Compression

–

R

–

20 Recording

date and time

RR

–

21 Image size

–

R

–

12:30’12/10/26’12/10/26 12:30

1010

4/304/30

1 87

2

0

23 64

5

Still image

● Detailed

4/304/30

12

M

2.02.01/10001/1000

100-0004

AUTO

WB

AUTO

WB

100

ISO

100

ISO

N

ORM

1

MAGICMAGIC

’12/10/26 12:30

F3.9

1010

12

M

2.02.0F3.9F3.91/10001/1000

100-0004

AUTO

WB

AUTO

WB

100

ISO

100

ISO

1

MAGICMAGIC

’12/10/26 12:30

N

ORM

87

1110 129

13

20

21

19

1 23 54

15

18

1

7

16

6

14

● No information

1

Switching the displays

The displays change in the order of Normal → Detailed → No info. each time F (INFO) is pressed.

18

EN

Erasing images during playback

(Single image erase)

1

Display the image you want to erase and

press G (



).

MENU

Erase Back

Erase

Cancel

4/304/30

2

Press FG to select [Erase], and press the

A button.

Multiple images or all images can be erased at a time

(p. 31).

19

EN

Shooting movies

1

Press the R button to start recording.

00:00

RECREC

00:00

00:3400:34

00:0000:00

RECREC

Lights up red

when recording

Recording time

Recording length (p. 60)

The movie is shot in the set shooting mode. Note that

the shooting mode effects may not be obtained for

some shooting modes.

Sound is also recorded.

2

Press the R button again to stop recording.

Playing back movies

Select a movie, and press the A button.

00:12/00:3400:12/00:34

During playbackMovie

’12/10/26 12:3012:30

4/30

OK

Movie PlayMovie Play

’12/10/26

Pausing and

restarting

playback

Press the A button to pause

playback. During pause, fast

forward or reverse, press the A

button to restart playback.

Fast forward

Press I to fast forward. Press I

again to increase the fast forward

speed.

Rewind

Press H to rewind. Press H again

to increase the rewind speed.

Adjusting the

volume

Use FG to adjust the volume.

Operations while playback is paused

During pause

00:14/00:3400:14/00:34

Elapsed time/

Total shooting time

Cueing

Use F to display the ﬁ rst frame

and press G to display the last

frame.

Advancing and

rewinding one

frame at a time

Press I or H to advance or

rewind one frame at a time. Hold

I or H pressed for continuous

advance or rewind.

Resuming

playback

Press the A button to resume

playback.

To stop movie playback

Press the  button.

To play back movies on the computer, the included

PC software is recommended. For the ﬁ rst use of the

PC software, connect the camera to the computer,

then launch the software.

20

EN

Menu settings

Some shooting menu functions cannot be set in certain shooting modes.

For details, refer to “List of settings available in each shooting mode” (p. 53).

MENU

Camera Menu 1 Back

ResetReset

Off

OnImage Stabilizer

Compression

Shadow Adjust

AF Mode

Digital Zoom

Normal

Auto

Face/iESP

ESPESP/

d

0

c

a

b

e

9

PP

0.00.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

MENUMENU

12

M

Program Auto

6

7

3

2

1

5

4

8

Function menu Setup menu

Function menu

(p. 21)

1 Flash 3 Self-timer 5 White balance 7 Drive

2 Macro 4 Exposure compensation 6 ISO sensitivity 8 Image Size

Setup menu

9 Camera Menu 1

p. 25

Reset

Compression

Shadow Adjust

AF Mode

ESP/n

Digital Zoom

Image Stabilizer (Still images)

0 Camera Menu 2

p. 27

AF Illuminat.

Rec View

Icon Guide

Date Stamp

Super-Res Zoom

a Movie Menu

p. 28

Image Size

IS Movie Mode

R (Movie sound recording)

Wind Noise Reduction

b Playback Menu

p. 29

Slideshow

Edit

Erase

Print Order

R (Protect)

Upload Order

c

Settings Menu 1

p. 33

Memory Format/Format

Backup

Eye-Fi

USB Connection

q Power On

KeepzSettings

Sound Settings

d Settings Menu 2

p. 35

File Name

Pixel Mapping

s (Monitor)

TV Out

Power Save

l (Language)

X (Date/time)

e Settings Menu 3

p. 38

World Time

Beauty Settings

LED Illuminator

Page is loading ...

Olympus TG-625 Owner's manual

Olympus TG-625 Owner's manual

Related papers

Other documents