2. Computers & electronics
  3. Audio & home theatre
  4. MP3/MP4 players
  5. MP3/MP4 cases
  6. ClearOne
  7. Audio Demo

ClearOne Audio Demo Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the ClearOne Audio Demo Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
StreamNet™ 930-325-021-D - Audio Demo Kit
Add On with iPod® Dock (INTL)
© 2012 ClearOne. All rights reserved. Other product names may be trademarks of their respective owners.
Specifications subject to change without notice. 800-325-021-D Rev. 1.0 - November 2012.
> CLEARONE LOCATIONS
> WIRING DIAGRAM
HEADQUARTERS:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel: 801-975-7200
Toll Free: 800-945-7730
Sales: 800-707-6994
Fax: 801-977-0087
e-mail: [email protected]
LATAM
Tel: 801-974-3621
e-mail: [email protected]
EMEA
Tel: 44 (0) 1189 036 053
e-mail: [email protected]
APAC
Tel: 801-303-3388
e-mail: [email protected]
TechSales
Tel: 800-705-2103
e-mail: [email protected]
Technical Support
Tel: 800-283-5936
e-mail: [email protected]
DEMO KIT CONFIGURATION PROCEDURE
To properly configure the StreamNet Demo Kit, complete the following steps:
1. Ensure you have the most recent copy of the Dealer Setup program installed on your PC. This can be downloaded
from the ClearOne website (http://www.clearone.com/resources#enterprise_streaming, http://www.clearone.com/
resources#residential_streaming).
2. Ensure that you have downloaded the latest Dealer Setup Manual from the ClearOne website (http://www.clearone.
com/resources#enterprise_streaming, http://www.clearone.com/resources#residential_streaming).
3. Connect the Demo Kit as shown in the following figure.
4. Use directions from the Dealer Setup manual to perform the following tasks:
Start the Dealer Setup program and use the Dealer Setup Wizard to:
•Update device firmware.
•Create a project.
•Save the project file.
•Match devices.
•Send the configuration to all devices.
TM
/