LG MDT364-A5U Owner's manual

Brand: LG

Model: MDT364-A5U

Category: DVD players

Type: Owner's manual

This manual is also suitable for

MDT364

MDS714 (MDS714-A5U, MDS714V/C/S/W)

MDT364 (MDT364-A5U, MDS364V/W)

MDD264 (MDD264-A5U, MDS264V)

ENGLISH

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 1

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE

COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such as a book case or

similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable

operation of the product and to protect it from over heating. The openings shall be

never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product shall not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer's instruction has been

adhered to.

CAUTION: This product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and

retain it for future reference. Shall the unit require maintenance, contact an authorized

service center.

Use of controls, adjustments or the performance of procedures other than those

specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible

laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and

no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; That is, a

single outlet circuit which powers only that appliance and has no additional outlets or

branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,

extension cords, frayed power cords, or damaged or cracked wire insulation are

dangerous. Any of these conditions could result in electric shock or fire. Periodically

examine the cord of your appliance, and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced

with an exact replacement part by an authorized service center.

Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the

product, ensure that the plug is easily accessible.

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 2

Safety Precaution 2

Contents 3

Setting up 4

Hooking up the unit 5

Main Unit 6

Remote control 7

Initial Setting the Area Code 8

Adjust the general settings 8-10

Setting the sound mode 10-11

Setting the clock 11

Displaying Disc Information 12

Playing a Disc 12-14

Viewing photo files 14

Listening to the radio 15

Listening to the cassette tapes 15

Listening to music from your portable player

or external device 16

Using an USB device 16

Power Save Mode

You can set up the unit into an economic power save mode.

In power-on status, press and hold

1/\

button for about 3 seconds.

- Nothing is displayed in the display window when the unit is turned off.

To cancel, press

1/\

Recording to USB 17

Recording to TAPE 18

Synchronized Recording from CD to TAPE 18

Karaoke Basic Playback 19

Reserving the Song 19

Karaoke Menu Playback 20

Language Codes 21

Area Codes 21

Troubleshooting 22

Types of Playable Discs 23

Specifications 24

Contents

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 3

Attaching the speakers to the unit

Setting up

Remote control Operation

Point the Remote Control at the display window and press the buttons.

Remote control Battery Installation

1 Detach the battery cover on the rear of the remote control

2 Insert the R03 (size AAA) battery with 3 and # aligned correctly.

Be careful of the following

• Be careful to make sure children not to put their hands or any objects into the

*speaker duct.

* Speaker duct : A hole for plentiful bass sound on speaker cabinet

(enclosure).

Grey

Red

Green

Orange

Blue

White

Rear

Front

Center

Sub Woofer

Rear

Front

Behind you and to your right.

In front of you, to the right of the screen.

Above screen, directly in front of you.

This can be placed in any front position.

Behind you and to your left.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

Connect the black end of each wire to the terminals marked - (minus) and the

other end to the terminals marked + (plus).

To connect the cable to the each speakers, press each plastic finger pad to

open the connection terminals on the back of each speaker. Insert the wire and

release the finger pad.

MDS714 (5.1 channel)

Red

White

Orange

Front

Sub Woofer

In front of you, to the right of the screen.

In front of you, to the left of the screen.

This can be placed in any front position.

POSITION

SPEAKER

COLOUR

MDT364 (2.1 channel)

Red

White

Front

In front of you, to the right of the screen.

In front of you, to the left of the screen.

POSITION

SPEAKER

COLOUR

MDD264 (2 channel)

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 4

Hooking up the unit

COMPONENT VIDEO OUT

(PROGRESSIVE SCAN) jacks

connection

Connect one end of the component(Y PB

PR) cable to the COMPONENT VIDEO

OUT (PROGRESSIVE SCAN) jack on

the unit and other end to the COMPO-

NENT INPUT jack on your TV.

VIDEO OUT jack connection

Connect the VIDEO OUT jack on the unit to

the corresponding input jacks on your TV

using a Video cable.

AUX IN (L/R) jacks connection

Connect a VCR or Auxiliary device, etc. to the

INPUT jack of this unit.

Press the FUNCTION button on the remote

control until the “AUX” indicator is displayed in

the display window.

Antenna connection

Fit the AM loop aerial to its stand

Connect the AM loop aerial to the unit.

Connect the FM aerial

The reception will be at its best when the two loose ends of

the aerial are in a straight line and horizontal.

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 5

/\ Turn ON/ OFF.

Display window

Disc tray

- z/\\ Recording/Pauses

- ./>

REWIND or FAST FORWARD

Auto Tuning/ SCAN/ Setting clock

PRESET

FORWARD/ REVERSE PLAY

Stop

USB direct recording

PRO EQ

BASS (100 Hz)/ MIDDLE (1 KHz)/

TREBLE (10 KHz)

CD OPEN

DISC SKIP

Choose a desired disc.

DUBB. Recording from tape to tape.

CD SYNC. CD to Tape Synchronized.

ST./MO. To improve the FM reception

on TUNER.

SET Confirms the settings.

(TIMER/ CLOCK/ PRO EQ)

CD II Pauses

REV. MODE

Scroll through a selection of cassette

playing options.

DEMO

In power off state to

demonstrate the function on display

window. To cancel it, press

/\ or

this button again.

AUX/PORT.

Auxiliary device/ Portable in.

Main unit

Selects TUNER function.

Selects TAPE function.

Selects KARAOKE/ DVD/CD function.

Selects USB function.

PRO EQ

Volume control

Cassette Door 1, 2

TIMER

(

Use your player as an alarm clock.)

CLOCK (

See setting the Clock )

EQ./LG EQ

You can choose fixed sound

impression.

XDSS plus

Reinforce the treble, bass and sur-

round effect.

USB connector

PHONES Headphone jack

PORT. IN For connecting a portable

device and playing it through this

system’s speakers.

MIC 1, 2

ECHO VOL.

UU//uu

Adjust microphone echo volume.

MIC VOL.

UU//uu

Adjust microphone volume.

0-9 numerical buttons: Selects num-

bered options in a menu.

3029

2423

2019

1 2 43 5

26 27 28 29 30

31 32

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 6

Remote control

POWER: Switches the unit ON or OFF.

FUNCTION: Changes the function.

SLEEP:

Sets the System to turn off automatically at a

specified time. (Dimmer : Dims the LED (Light-emitting

diode) of front panel by half in power-on status.)

OPEN/CLOSE

(

)

: Open or close your CD door.

TITLE: If the current DVD title has a menu, the title menu

appears on the screen. Otherwise, the disc menu may

appear.

DISPLAY: Accesses On-Screen Display.

MENU: Accesses the menu on a DVD disc.

SETUP: Accesses or removes setup menu.

II ii UU uu

(left/right/up/down): Used to navigate on-screen

displays.

ENTER: Acknowledges menu selection.

PRESET (

UU uu

): Selects programme of Radio.

TUN. -/+ (

II ii

): Tunes in the desired radio station.

RETURN (O): Moving back wards in the menu.

REC (z): Recording to USB/ TAPE.

STOP (x): Stops playback or recording.

PLAY (B): Starts playback.

MO./ST.: MONO/STEREO FM mode state, selects MONO

or STEREO by pressing this button.

PAUSE/STEP(X): Pausing playback.

KEY CON.(b/#

You can change the key to suit your vocal

range in KARAOKE mode.

TEMPO (-/+)

This function enable you to play fast or slow

the music speed in KARAOKE mode.

SCAN(bb/BB): Search backward or forward.

SKIP(./>): Go to next or previous chapter/track/Title.

D. SKIP(DISC SKIP): Choose a desired disc.

MUTE: To mute the sound.

VOL (Volume) +/-: Adjusts speaker volume.

EQ/ LG EQ (

EQUALIZER Effect): You can choose sound

impressions.

0-9 numerical buttons: Selects numbered options in a menu.

TONE CONTROL( ): Adjusts man’s or woman’s key in

the karaoke mode.

REPEAT: To select a play mode.(Random, Repeat)

SHADOW: It will be highlighted by background shadow.

S-TITLE: During playback, you can select a desired subtitle

language.

TV Control buttons : Controls the TV. (LG TV only)

PROG./MEMO.: Accesses or removes Program menu.

CLEAR: Removes a track number on the Program List.

KARAOKE: In DVD Function, it can change to Karaoke

function.

MIC VOL.(+/ - ): Adjusts microphone volume.

ECHO VOL.(+/ - ): Adjusts echo volume.

VOCAL FADER: You can enjoy the function as karaoke, by

reducing singer vocal of music in the various source.

: This button is not available.

Controlling the TV.

You can control the sound level, input source, and

power switching of LG TVs as well. Hold POWER (TV)

and press PR/CH (+/–) button repeatedly until the TV

turns on or off.

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 7

Adjust the general settings

ON REMOTE

1 Display setup menu SETUP

2 Select a desired option on the first level

UU uu

3 Move to second level

4 Select a desired option on the second level

UU uu

5 Move to third level

6 Change the setting

UU uu

and

ENTER

Initial Setting the Area Code

1 Display setup menu SETUP

2 Select LOCK menu on the first level

UU uu

3 Move to second level

The activated Area Code appears on the

second level.

4 Move to the third level

5 Enter a new password numerical buttons

(0-9) and ENTER

6 Recheck the entered new password numerical buttons

(0-9) and ENTER

7 Select a code for a geographic area

After select, Rating and Password will be

UU uu II ii

and

activated. (page 21) ENTER

8 To confirm what you press

Make sure to finish setting the Area Code

before leaving the setup menu if you cannot

set the rating and Password ENTER

When you use this unit for the first time, you have to set the Area

Code as shown below.

ON REMOTE

Adjust the general settings - More you can do

Adjust the language settings

OSD – Selects a language for the Setup menu and on-screen display.

Disc Audio/ Disc Subtitle/ Disc Menu – Selects a language for the Audio/

Menu/ Subtitle.

[Original]: Refers to the original language in which the disc was recorded.

[Others]: To select another language, press number buttons then ENTER to

enter the corresponding 4-digit number according to the language

code list in the reference chapter.

Refer to the language code on Page 21.

[OFF] (for Disc Subtitle): Turn off Subtitle.

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 8

Adjust the display settings

TV Aspect – Select which screen aspect to use based on the shape of your TV

screen.

[4:3]: Select when a standard 4:3 TV is connected.

[16:9]: Select when a 16:9 wide TV is connected.

Display Mode – If you selected 4:3, you’ll need to define how you would like

widescreen programs and films to be displayed on your TV

screen.

[Letterbox]: This displays a widescreen picture with black bands at the top

and bottom of the screen.

[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary

Progressive Scan

Progressive Scan Video provides the high quality pictures with less flickering. If

you are using the Component Video jacks for connection to a TV or monitor that

is compatible with a progressive scan signal, set [Progressive Scan] to [On].

Press ENTER to confirm your selection

- If you not press ENTER within 10 seconds it will be [OFF].

Adjust the audio settings

DRC (Dynamic Range Control) – Make the sound accurate when the volume

is turned down (Dolby Digital only). Set to

[On] for this effect.

Vocal – Select [On] to mix karaoke channels into normal stereo. This function is

effective for multi-channel karaoke DVDs only.

Note:

2.1 Speaker Setup (MDT364)

5.1 Speaker Setup (MDS714)

ON REMOTE

1 Open the settings menu SETUP

2 Select the audio icon

UU uu

3 Select right to enter the audio menu, then

select 5.1 Speaker Setup

ENTER

4 Select the speaker you want to adjust

II ii

5 Select an option and change

the settings

UU uu II ii

6 Set the output level (volume) of a speaker

from -5dB to +5dB.

II ii

7 If you connect speakers to your unit,

setting the Distance lets the speakers to

know how far the sound has to travel to

reach your set listening point. This allows

the sound from each speaker to reach the

listener at the same time.

II ii

8 Test the signals of each speaker

Adjust the volume to your taste

according to these signals.

II ii

9 Save your settings and exit the Setup

RETURN

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 9

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not

yet entered a password you are prompted to do so. Enter a 4-digit password.

Enter it again to verify. If you make a mistake while entering number, press

CLEAR to delete numbers then correct it.

If you forget your password you can reset it. Press SETUP and Input ‘210499’

and press ENTER. The password has now been cleared.

Area code – Select a code for a geographic area as the playback rating level.

This determines which area’s standards are used to rate DVDs

controlled by the parental lock. See the Area Codes on Page 21.

Rating – Select a rating level. The lower the level, the stricter the rating. Select

[UNLOCK] to deactivate the rating.

Password – Sets or changes the password for lock settings.

[New]: Enter a new 4-digits password using the numerical buttons then press

ENTER. Enter the password again to confirm.

[Change]: Enter the new password twice after entering the current password.

Adjust the others settings

DivX (R) Registration - We provide you with the DivX

VOD (Video on

demand) registration code that allows you to rent and purchase videos using

the DivX

VOD service.

For more information, visit www.divx.com/vod.

Press ENTER when [Select] icon is highlighted and you can view the

registration code of the unit.

SSR (Real Time Score) - This function will be show the Score to real time by

checking interval and beat during sing a song in the

karaoke mode only.

Selects the [On]: Score bar shows levels while checking the interval and beat.

Selects the [Off]: Score bar are not display on the screen.

-This function is not supported the Semi karaoke mode.

Semi Karaoke - When a chapter/ title/ track is fully finished, this function shows

the score in the screen with a fanfare sound.

• Semi Karaoke on:

When you finished singing a score will appear on the screen.

• Semi Karaoke off: Fanfare and score do not appear on the screen.

Notes:

- DVD, DVD Karaoke discs with more than 2 tracks are available discs for the

this function.

- When you watch movies, “off ” the Semi Karaoke at the SETUP menu or enjoy

it without connecting the MIC if the fanfare or score appears during changing a

chapter.

Setting the sound mode

PRO EQ

1 Press PRO EQ.

2 When “PRO EQ” is displayed.

3 Select the sound effect you want among BASS (100 Hz), MIDDLE (1 kHz),

TREBLE (10 kHz).

4 Adjust sound level turning each band control knob.

5 To finish the setting, press SET/CD II.

- This function is not available when a microphone is connected. (MDS714)

VOCAL FADER

You can enjoy the function as karaoke, by reducing singer vocal of music in the

various source. (MP3/ WMA/ CD/ etc.) Press the VOCAL FADER, and

“FADE ON” will appear in display window.

To cancel it, press VOCAL FADER again.

- This function is available to use only when a microphone is connected.

- The quality of the VOCAL FADER may be different depending on the

recording conditions of music files.

- It is not available on the MONO mode.

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 10

Using your player as an alarm clock

1 Press and hold TIMER. Each functions flashes(Ex. TUNER, USB, ...)

2 Press SET when the function you want to be woken by is showing.

If you choose TUNER, “PLAY” and “REC” flashes in the display window

alternately.

3 Choose one of them by pressing the SET.

4 “ON TIME” will be displayed. This is where you set the time you want the

alarm to start. Use

./> to change the hours and minutes and SET

to save.

5 The “OFF TIME” will be displayed. This is where you set the time you

want the function to stop.

6 Use

./> to change the hours and minutes and press SET to save.

7 You will be shown the volume (VOL) you want to be woken by. Use

./> to change the volume and SET to save. Switch the system off.

The clock icon

“”shows that the alarm is set.

8 When the system is turned off you can check the time the alarm and turn

the alarm on and off by pressing TIMER.

Fall asleep while listening to your player

Press SLEEP one or more times to select delay time between 10 and 180 minutes,

after the player will turn off. To check the remaining time, press SLEEP.

Enjoying a pre-programmed sound field

The system has a number of pre-set surround sound fields. You can select a

desired sound mode by using EQ/ LG EQ.

The displayed items for the Equalizer may be different depending on sound

sources and effects.

NATURAL You can enjoy comfortable and natural sound.

Local Regionally optimized sound effect.(DANGDUT/ ARABIC/

Specialization PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SAMBA/

equalizer SALSA)

AUTO EQ Realizes the sound equalizer that is the most similar to the

genre of which is included in the MP3 ID3 tag of song files.

POP This program lends an enthusiastic atmosphere to the

CLASSIC sound, giving you the feeling you are at an actual rock,

ROCK pop, jazz or classic concert.

JAZZ

MP3 OPT This function is optimized for compressible MP3/WMA file.

It improves the bass sound.

XDSS ON Reinforce the treble, bass and surround sound effect.

VIRTUAL You can enjoy more virtual surround sound.

NORMAL(OFF) You can enjoy the sound without equalizer effect.

PLII MOVIE Dolby Pro Logic II enables you to play stereo source on

PLII MUSIC 5.1-channel.

PLII MTRX(matrix)

ON DISPLAY Description

Setting the Clock

1 Turn the power on

2 Press for at least 2 seconds

3 Choose from either

AM 12:00 (for an AM and PM display) or 0:00

(for a 24 hour display)

4 Confirm your selection

5 Select the hours

6 Press

7 Select the minutes

8 Press

ON PLAYER

/ |

CLOCK

./>

SET

./>

SET

./>

SET

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 11

Displaying Disc Information - More you can do

You can select an item by pressing

UU uu

and change or select the setting by

pressing

II ii

urrent title (or track/ file)

number/total number of titles (or tracks/ files)

Current chapter number/total number of chapters

Elapsed playing time

Selected audio language or channel

Selected subtitle

Selected angle/total number of angles

Selected

Sound/EQ mode

Symbol Used in this Manual

All discs and file listed below MP3 files

DVD and finalized DVD±R/RW WMA files

DivX files

Audio CDs

ACDDivX

WMA

DVD

MP3ALL

Displaying Disc Information

1 Press DISPLAY

2 Select an item

UU uu

3 Adjust the Display menu settings

II ii

4 To return the exit DISPLAY

ON REMOTE

Playing a Disc - More you can do

Playing a DVD that has a menu

Most DVDs now have menus which load first before the film begins to play. You

can navigate these menus using

II ii UU uu

to highlight an option. Press PLAY to

select.

Skipping to the next/previous chapter/ track/ file

Press > to move to the next chapter/ track/ file.

Press . to return to the beginning of the current chapter/ track/ file.

Press . twice briefly to step back to the previous chapter/ track/ file.

Pausing a playback

Press PAUSE/STEP (X) to pause playback. Press

to continue playback.

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

Playing repeatedly or randomly

1 Press REPEAT repeatedly. The current track/ file will be played back

repeatedly or randomly.

2 To return to normal playback, press REPEAT repeatedly to select [Off].

- Random play mode : only music files.

Selecting a subtitle language

During playback, press S-TITLE on the remote control repeatedly.

Fast forward or fast reverse

1 Press m or M on remote control during playback.

2 You can change the various playback speed by pressing m or M repeatedly.

3 Press

to continue play at normal speed.

ALL

DivXDVD

ALL

DivXDVD

ALL

DVD

Playing a Disc

ON REMOTE

1 Open the disc tray

2 Insert a disc

3 Close the disc tray

4 To Start playback

5 To stop playback

OPEN/CLOSE

ON PLAYER

CD OPEN

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 12

1.5 times faster playback

1 Press

when a disc is already playing to watch and listen.

2 B x1.5 will appear on the screen.

3 Press

again to return to normal playback speed.

Slow down the playing speed

1 While playback is paused, press m/M.

2 You can change the various playback speed by pressing m/M repeatedly.

3 Press

to continue play at normal speed.

Starting play from selected time

Searches for the starting point of entered time code.

1 Press DISPLAY then select clock icon. and then press ENTER.

2 Enter a time then press ENTER.

For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter

“11020” by using numerical buttons and press ENTER. If you enter the wrong

number, press CLEAR to enter again.

Last Scene Memory

This unit memorizes last scene from the last disc that is viewed. The last scene

remains in memory even if you remove the disc from the player or switch off

the unit. If you load a disc that has the scene memorized, the scene is auto-

matically recalled.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five

minutes.

System Select - Optional

You must select the appropriate system mode for your TV system. In DVD/CD

function, remove any disc that might be in the unit, press and hold

PAUSE/STEP (X) for more than five seconds to be able to select a system

(PAL, NTSC, AUTO).

Mixed disc or USB Flash Drive – DivX, MP3/ WMA and JPEG

When playing a disc or USB Flash Drive contained with DivX, MP3/ WMA and

JPEG files together, you can select file type with MENU button on the remote

control.

DVD

DivXDVD

DVD

Changing the character set to display DivX

subtitle correctly

- Optional

1 If the subtitle dose not display properly, press and hold S-TITLE about

3 seconds to display the language code menu.

2 Press S-TITLE repeatedly to change the language code until the subtitle is

displayed properly.

DivX disc compatibility with this player is limited as follows

• Available resolution size of the DivX file is under 800x600 (W x H) pixel.

• The file name of the DivX subtitle is available by 45 characters.

• If there is impossible code to express in the DivX file, it may be displayed as

“ _ ” mark on the display.

• If the number of the screen frame is over 30 per 1 second, this unit may

not operate normally.

• If the video and audio structure of recorded files are not interleaved,

either video or audio is outputted.

Playable DivX file : “.avi ”, “.mpg ”, “.mpeg ”, “.divx”

Playable Subtitle format : SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation

Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt)

VobSub(*.sub)

Playable Codec format : “DIVX3.xx ”, “DIVX4.xx ”, “DIVX5.xx ”, “MP4V3 ”,

“3IVX ”.

Playable Audio format : “AC3 ”, “PCM ”, “MP3 ”, “WMA ”.

DivX

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 13

Creating your own program

You can play the contents of a disc in the order you want by arranging the order

of the songs on the disc. The program is cleared when the disc is removed.

1 Select a desired music then press PROG./MEMO. or select “ ” and then

press ENTER to add the music to the program list.

2 To add all music in the disc, select “ ” and then press ENTER.

3 Select a music from the program list then press ENTER to start programmed

playback.

4 To clear a music from the program list, select the music you want to clear

then press CLEAR or select “

”

icon and then press ENTER.

To clear all music from the program list, select “ ” then press ENTER.

Displaying file information (ID3 TAG)

While playing a MP3 file containing file information, you can display the

information or time by pressing DISPLAY repeatedly.

MP3 / WMA disc compatibility with this player is limited as follows

• Sampling frequency: within 32 - 48 kHz (MP3/ WMA)

• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)

• The unit cannot read an MP3/ WMA file that has a file extension other than

“.mp3” / “.wma”.

• CD-R physical format should be ISO 9660 LEVEL 1/ JOLIET

• If you record MP3 / WMA files using software that cannot create a file system

(eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend

that you use Easy-CD Creator, which creates an ISO 9660 file system.

• File names should have a maximum of 8 letters and must incorporate an

.mp3 or .wma extension.

• They should not contain special letters such as / ? * : “ < > l etc.

• The total number of files on the disc should be less than 999.

This unit requires discs and recordings to meet certain technical standards in

order to achieve optimal playback quality. Pre-recorded DVDs are

automatically set to these standards. There are many different types of

recordable disc formats (including CD-R containing MP3 or WMA files) and

these require certain pre-existing conditions (see above) to ensure compatible

playback.

Customers should note that permission is required in order to download

MP3 / WMA files and music from the Internet. Our company has no right

to grant such permission. Permission should always be sought from the

MP3WMA

MP3

ACDMP3WMA

Viewing photo files

ON REMOTE

1 Open the disc tray

2 Insert a Disc

3 Close the disc tray

4 Select a photo file on

the menu

5 Display the selected

file in full screen

6 To stop playback

CD OPEN

OPEN/CLOSE

UU uu

ENTER

ON PLAYER

Viewing photo files - More you can do

Viewing photo files as a slide show

1 Use

II ii UU uu

to highlight ( ) icon then press ENTER to start slide show.

2 You can change slide show speed (3, 5, 8 seconds) using

II ii

when ( )

icon is highlighted.

Skipping to the next/previous photo

Press . or > to view the previous/next photo.

Rotating a photo

Use

UU uu

to rotate the photo in full screen.

Pausing a slide show

1 Press PAUSE/STEP (X).

2 Press

or X to continue the slide show.

JPEG disc compatibility with this player is limited as follows:

• Normal: 5120 x 3840, Progressive: 2043 x 1536

• Recording condition: ISO9660 LEVEL 1/ JOLIET

• Maximum files : Under 999.

• Some discs may not operate due to a different recording format or the

condition of disc.

• File extensions: “.jpg”

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 14

Listening to the cassette tapes - More you can do

Playing Fast backward or Forward

After pressing

./> (bb/BB on the remote control) during playback,

press

at a point you want.

Auto Reverse Deck

1 Press TAPE to select “TAPE-2”.

2 You can set the tape to play one side , both sides one time , or

both sides repeatedly , by pressing REV. MODE one or more times.

Dubbing

This function allows you to record from tape to tape.

1 Press TAPE to select “TAPE-1”.

2 Insert the tape as follows.

TAPE1 - Insert a playback tape to dub.

TAPE2 - Insert a blank tape.

3 Press DUBB. “DUBBING” shows. Dubbing starts.

4 To stop dubbing, press

Listening to the cassette tapes

1 Open the tape door

2 Insert the tape

3 Close the tape door

4 Select the TAPE function

5 Start the tape playing

6 To stop a tape playing

ON PLAYER

PUSH EJECT

TAPE

ON REMOTE

FUNCTION

Listening to the radio - More you can do

Looking for radio stations automatically

Press

./>

on the front panel (

TUN.- /TUN.+) on the

remote control)

for more than 0.5 second. The tuner will scan automatically and stop when

it finds a radio station.

Deleting all the saved stations

1 Press and hold PROG./MEMO. “ERASE ALL” shows.

2 Press PROG./MEMO. to erase all the saved stations.

Improving poor FM reception

Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner

from stereo to mono and usually improve the reception.

Listening to the radio

1 Select FM/ AM

2 Select the radio station

3 To ‘save’ a radio station

A preset number will show in

the display.

4 Select the preset number

5 To confirm press

Up to 50 radio stations can be

saved

6 To select a ‘saved’ station

press

TUNER

./>

b / B

FUNCTION

TUN. -/+

PROG./MEMO.

PRESET

UU uu

PROG./MEMO.

PRESET

UU uu

ON PLAYER

ON REMOTE

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 15

Listening to music from your portable

player or external device

The unit can be used to play the music from many types of portable player or

external device.

1 Connect the portable player to the

PORT.IN(PORTABLE IN) connector of

the unit.

Connect the external device to the AUX

connector of the unit.

> If your TV has only one output for

audio(MONO), connect it to the

left(white) audio jack on the unit.

2 Turn the power on.

3 Select the PORTABLE or AUX function.

4 Turn on the portable player or external

device and start it playing.

/ |

AUX PORT.

POWER

FUNCTION

ON PLAYER ON REMOTE

PORT. IN (PORTABLE IN)

Your unit

VCR, TV, ...

Using an USB device

ON PLAYER ON REMOTE

You can enjoy media files saved on an USB device by connecting the

USB device to the USB port of the unit.

If you want to operate other function, see the CD playback section.

1 Connect the USB device to the USB

port of the unit.

2 Select the USB function.

3 Select a file you want to play.

4 Start your media playing.

5 To stop, press

6 Before disconnecting the portable

USB device, change to any other

function.

USB

./>

TUNER/TAPE/...

FUNCTION

UU uu

/ ENTER

FUNCTION

Compatible USB Devices

• MP3 Player : Flash type MP3 player.

• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.

• This USB Function may not be available depending on devices.

USB device requirement

• Devices which require additional program installation when you have

connected it to a computer, are not supported.

Look out for the follows

• Do not extract the USB device while in operation.

• For a large capacity USB, it may take longer than a few minute to be

searched.

• To prevent data loss, back up all data.

• If you use a USB extension cable or USB hub, the USB device is not

recognized.

• Using NTFS file system is not supported. (Only FAT(16/32) file system is

supported.)

• This unit is not supported when the total number of files is 1000 or more.

• External HDD, Locked devices or hard type USB devices are not supported.

• The unit can not be used as a storage device.

• USB port of the unit can not be connected to PC.

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 16

Recording to USB

You can record a various sound source to USB.

1 Connect the USB device to the unit.

2 Select a mode in which you want to

record. (TUNER/ CD/ ....)

Play back a sound source first.

3 Start the recording.

> If you press the button on the remote

control, the display changed in the

following order, “USB REC” <-> “TAPE

REC”. Then press the button on

“USB REC” once more.

4 To stop recording, press :

ON PLAYER ON REMOTE

TUNER/TAPE/...

R (USB REC)

FUNCTION

z REC

Recording to USB - More you can do

Recording Music file in disc source to USB

One track recording

If the USB recording is played during playback of the CD, the track/ file would

be recording into the USB.

All tracks recording

If the recording button is pressed at the CD stop, all tracks/ files would be

recording.

Program list recording

USB records after creating your own program if you want to record the track you

want (Audio CD only).

When you are recording, look out for the following

• You can check the recording percentage rate for the USB record on the

screen during the recording. (AUDIO, MP3/ WMA CD only)

• During recording MP3/ WMA, there is no sound.

• When you stop recording during playback, the file that has been recorded at

that time will be stored.(Audio CD only)

• Do not remove the USB device or turn off during USB recording. If not, an

incomplete file may be made and not deleted on PC.

• Recording through microphones is not available.

• If USB recording does not work, the message like “NO USB”, “ERROR”,

“USB FULL” or “NO REC” is displayed on the display window.

• The file number of the recording is saved automatically.

• It’ll be stored as follows.

AUDIO CD MP3/ WMA

the other sources

The making of unauthorized copies of copy-protected material, including

computer programs, files, broadcasts and sound recordings, may be an

infringement of copyrights and constitute a criminal offence.

This equipment should not be used for such purposes.

Be responsible

Respect copyrights

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 17

Recording to TAPE

You can record a various sound source to TAPE.

1 Open the tape deck.

> There are 2 tape decks on the unit, open

the second one.

2 Insert a blank tape and close the door.

3 Select a mode in which you want to

record.

4 Play back a sound source first.

5 Press

> The display changed in the following

order, “USB REC” <-> “TAPE REC”

6 Press the button once more when

“TAPE REC” is displayed.

> Recording starts.

7 To stop recording, press

PUSH EJECT

TUNER/USB/...

FUNCTION

z REC

ON PLAYER ON REMOTE

Synchronized Recording from CD to Tape

1 Open the tape deck and then insert

a blank tape.

2 Close the door and insert a CD.

> Audio CD only

3 To select CD function, press

4 Press the button on a stop status to

move to CD synchronizing mode.

> Recording automatically starts 7

seconds later after “CD SYNC” blinks.

5 To stop, press

PUSH EJECT

CD OPEN

KARAOKE DVD/CD

CD SYNC.

OPEN/CLOSE

FUNCTION

ON PLAYER

ON REMOTE

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 18

Karaoke Basic Playback - More you can do

You can change the key to suit your vocal range with Key Control

You can adjust the key to 13 steps (6 steps higher, 6 steps lower and the

original key).

- The setting appears on the screen.

• To flatten the key one by one, press the KEY CON.(b) repeatedly during

playback.

• To sharp the key one by one, press the KEY CON.(#) repeatedly during

playback.

- Press TONE CONTROL( ) on remote control repeatedly to change MAN’s

or WOMEN’s tone.

To change tempo

You can use this function when you want to play fast or slow.

1 Press TEMPO + repeatedly during singing to play faster.

2 Press TEMPO - repeatedly during singing to play slower.

Shadow Function

If KARAOKE CD caption and the song’s subtitle are mixed up, the song’s

subtitle may be invisible. In this case, to highlight the song’s subtitle, press

SHADOW.

- It will be highlighted by background shadow image.

To adjust ECHO Volume

You can give an echo effect to the sound from the microphones.

Press the ECHO VOL. + on the remote control to increase the echo volume or

ECHO VOL. - decrease it. (MIN, 1~14, MAX steps)

Using Microphone

1 Connect your microphone to the MIC1/ MIC 2 Jacks.

“MIC IN” will be shown in the display window.

2 Play the music you want.

3 Sing along with the accompaniment.

Adjust the microphone volume by pressing MIC VOL.(+/-) button.

Notes:

• When not using the microphone, set the MIC VOL.(+/-) button to minimum or

turn off the MICs and remove the microphone from the MIC Jacks.

• If the microphone is set too near the speaker, a howling sound may be

produced. In this case, move the microphone away from the speaker or

decrease the sound level by using the MIC VOL.(+/-) button.

• If sound through the microphone is extremely loud, it may be distorted. In this

case, press the MIC VOL.(+/-) button toward minimum.

Reserving the Song - More you can do

To cancel the reserved song

Each time you press CLEAR, the reserved song will be cancelled one by one.

To cancel or change the wrong reserved song

1 Press the PROG./MEMO. to move to the desired position.

2 Press the CLEAR to cancel the reserved song

Karaoke Basic Playback

ON REMOTE

1 Check if the system is connected. (Page 4)

2 Turn on the power of TV and unit.

POWER

3 Open the disc tray and insert supplied

karaoke disc.

OPEN/CLOSE

4 Close the disc tray.

OPEN/CLOSE

To enter to the DVD/CD(karaoke) mode.

FUNCTION(DVD/CD)

KARAOKE

6 Connect the microphone to the MIC jacks.

7 Press the melody number you want. If you

want to cancel the selected melody number,

press the CLEAR. NUMERIC No. 0 ~ 9

8 To start, press ENTER or

PLAY

9 To stop, press

STOP

Reserving the Song

ON REMOTE

1 To reserve melody number you want in the

karaoke disc play mode, press NUMERIC No. 0 ~ 9

2 To reserve, press

The melody number is reserved PROG./MEMO.

3 Repeat steps 1-2.

You can reserve at most 8 songs

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:57 PM Page 19

Karaoke MENU playback - More you can do

1. SETUP

Select one you want to activate/deactivate among the following functions.

1. SCORE

2. FANFARE

3. LYRIC

4. CHORUS

Select ON/OFF to activate/deactivate.

2. MUSIC LIST

You can select a desired song on each music list.

1. LOCAL SONG

2. POP SONG

3. CLASSIC

Select one among followings when you selected LOCAL SONG / POP SONG in

the previous step.

1. SONG LIST

2. SINGER LIST

Select one among followings when you selected CLASSIC LIST in the previous

step.

1. CLASSIC LIST

2. COMPOSER LIST

Select initial of song title or entire title.

3. RANDOM

You can enjoy songs randomly.

4. CHALLENGE

You can enjoy a song game dividing by two teams of red team & blue team.

Karaoke MENU Playback

ON REMOTE

1 To move to the main menu, press MENU

The main menu appears on the screen.

2 Select a desired option on the menu.

UU uu II ii

3 Adjust the menu settings ENTER

or Select a option from the menu.

4 To move the previous mode.

1 Select .

2 Select .

3 Press .

4 Select number to sing along

with the accompaniment.

5 Repeat the step 4.

Change the team of

red or blue team alternately.

6 When reaching the targeted

winning number, will be

shown on the TV screen.

7 Whether you keep going the

song game or not,

select or .

MDS714-A5U_LGEPS_ENG_5777 1/11/10 3:58 PM Page 20

Page is loading ...

LG MDT364-A5U Owner's manual

Brand: LG

Model: MDT364-A5U

Category: DVD players

Type: Owner's manual

This manual is also suitable for

MDT364

Download PDF

report

LG MDT364-A5U Owner's manual

This manual is also suitable for

LG MDT364-A5U Owner's manual

Related papers

Other documents