Everpure Claris Single Head Datasheet

Everpure
Brand
Everpure
Model
Claris Single Head
Category
Camera filters
Type
Datasheet

Everpure Claris Single Head is a commercial quality filter head designed exclusively to fit Claris filter cartridges. It is ideal for foodservice and vending applications and is engineered for durability, strength, and longevity. The filter head features a built-in flush port, auto shut-off, adjustable by-pass, flow restrictor, and backflow restrictor. It can be operated freestanding, lying horizontally, or mounted vertically.

Everpure Claris Single Head is a commercial quality filter head designed exclusively to fit Claris filter cartridges. It is ideal for foodservice and vending applications and is engineered for durability, strength, and longevity. The filter head features a built-in flush port, auto shut-off, adjustable by-pass, flow restrictor, and backflow restrictor. It can be operated freestanding, lying horizontally, or mounted vertically.

B E N E F I T S
A P P L I C A T I O N / S I Z I N G
I N S T A L L A T I O N T I P S
O P E R A T I O N T I P S
Claris Single Head
Filter head with 3/8” BSP fittings exclusively for Claris
replacement cartridges
QL3 Single Head: EV9259-14
Claris Single Head: EV4339-21
Commercial quality filter head is designed
exclusively to fit Claris filter cartridges
Solid durable construction is ideal for foodservice
and vending applications
Engineered for durability, strength and longevity
Will not corrode
HEAD FEATURES
Built-in flush port
Auto shut-off
Adjustable by-pass
Flow restrictor
Backflow restrictor
EV4339-21
Change Claris cartridge when its pre-calculated water
volume has been reached or at least once a year
The system can be operated freestanding, lying
horizontally or mounted vertically
If mounting vertically to a wall, securely connect
the mounting bracket to the wall using suitable
screws
Water pressure at the filter system inlet must
not exceed 116 psi (8 bar). A pressure reducer
valve must be installed on the water supply side
of the filter system if the inlet pressure exceeds
116 psi (8 bar)
Shut off valve must be installed upstream of
the filter
Refer to Installation, Operation & Maintenance
Manual for cartridge flushing and RO start-up
Change cartridges when capacity is reached
Always flush the filter cartridge at time of
installation and cartridge change
Do not use hardness test strips to check for
hardness reduction, please use Titration kit to
check for hardness reduction
The CLARIS filter systems are typically used to
feed the following appliances:
-Coffee and Espresso Machines
-Hot drink vending machines
-Combi steamers and self-cooking systems
-Steam cookers and ovens
-Brewed Iced Tea
The systems can be operated horizontally or
vertically, depending on the space available
S P E C I F I C A T I O N S
WA R R A N T Y
Claris Single Head
Dimensions:
5.78”H x 3.31”W x 4.68”D
No electrical connection required
5.782
3.310
.963
1.572
3/8” BSP
THREAD (TYP)
4.675
2.750
Everpure Claris water treatment systems are covered by a limited
warranty against defects in material and workmanship for a
period of one year after date of purchase. Everpure replaceable
elements (filter cartridges and water are covered by a limited
warranty against defects treatment cartridges) in material
and workmanship for a period of one year after date of purchase.
See printed warranty for details. Everpure will provide a copy of the
warranty upon request.
In Europe: In Japan:
EVERPURE, LLC PENTAIR WATER BELGIUM bvba EVERPURE JAPAN, INC.
1040 Muirfield Drive Industriepark Wolfstee Hashimoto MN Bldg. 7F
Hanover Park, IL 60133 Toekomstlaan 30 3-25-1 Hashimoto Sagamihara-Shi
Toll Free (800) 323-7873 B-2200 Herentals Kanagawa 229-1103
Tel. (630) 307-3000 Belgium Japan
Fax (630) 307-3030 Tel. 32-14-283-500 Tel. 81-(0)42-775-3011
www.everpure.com Fax 32-14-283-505 Fax 81-(0)42-775-3015
  • Page 1 1
  • Page 2 2

Everpure Claris Single Head Datasheet

Everpure
Brand
Everpure
Model
Claris Single Head
Category
Camera filters
Type
Datasheet

Everpure Claris Single Head is a commercial quality filter head designed exclusively to fit Claris filter cartridges. It is ideal for foodservice and vending applications and is engineered for durability, strength, and longevity. The filter head features a built-in flush port, auto shut-off, adjustable by-pass, flow restrictor, and backflow restrictor. It can be operated freestanding, lying horizontally, or mounted vertically.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents