LG 47SL9000 User manual

OWNER’S MANUAL

Please read this manual carefully before operating

your TV.

Retain it for future reference.

Record the model number and serial number of the TV.

Refer to the label on the back cover and quote this

information.

To your dealer when requiring any service.

Model :

Serial No. :

ENGLISH

Trade Mark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

This product qualifies for ENERGY

STAR in the “factory default (Home

Use mode)” setting and this is the set-

ting in which power savings will be

achieved.

Changing the factory default picture

setting or enabling other features will

increase power consumption that could

exceed the limits necessary to qualify

for Energy Star rating.

LCD TV

LCD TV MODELS

3322SSLL88******

3377SSLL88******

4422SSLL88******

4477SSLL88******

5555SSLL88******

LED LCD TV MODELS

4422SSLL99******

4477SSLL99******

LED LCD TV

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC.

I

CONTENTS

PREPARATION

32/37/42/47/55SL8

***

.................................... A-1

42/47SL9

***

......................................................... A-9

EXTERNAL EQUIPMENT SETUP

Antenna Connection..................................................1

Connecting with a Component cable................... 2

Connecting with an HDMI cable ........................... 3

Connecting with an HDMI to DVI cable .............. 3

Connecting with a Euro Scart cable.......................4

Usb setup .....................................................................4

Connecting with a RCA cable ..................................5

Connecting with a RF Cable.....................................5

Connecting with a D-sub 15 pin cable..................6

Insertion of CI Module ..............................................6

digital audio out SETUP............................................7

HEADPHONE SETUP.................................................7

Supported Display Resolution.................................8

Screen Setup for PC mode.......................................9

WATCHING TV / PROGRAMME CONTROL

Turning on the TV ................................................... 13

Initializing setup .......................................................13

Programme Selection ............................................. 13

Volume Adjustment ................................................ 13

Quick Menu ............................................................. 14

On-Screen Menus Selection and Adjustment... 15

Auto Programme Tuning......................................... 16

Manual Programme Tuning (In Digital Mode)... 19

Manual Programme Tuning (In Analogue Mode) .. 21

Programme Edit ....................................................... 23

Software Update...................................................... 25

Diagnostics............................................................... 26

CI Information.......................................................... 27

Selecting the Programme List .............................. 28

Favourite Programme Setup.................................. 29

Input List................................................................... 30

Data Service...............................................................31

Input Label.................................................................32

Simple manual.......................................................... 33

............................................................. 34

AV Mode ................................................................... 37

Initializing (Reset to original factory settings) ..38

TO USE A BLUETOOTH

Precautions when using the Bluetooth .............. 39

Setting the Bluetooth ............................................ 40

Set TV PIN .................................................................41

Bluetooth headset

- Connecting a new Bluetooth headset...........42

- Connecting to Bluetooth headset already

registered......................................................... 42

- Disconnecting the Bluetooth headset during

use............................................................................43

- When requesting to connect to TV from the

Bluetooth headset................................................43

Managing Registered Bluetooth device ............. 44

My Bluetooth Information......................................45

Receiving Photos from external Bluetooth device .........46

Listening to the Musics from external Bluetooth

device ..........................................................................46

TO USE A USB DEVICE

When connecting a USB device .......................... 47

Photo List.................................................................. 48

Music List ...................................................................52

Movie List...................................................................55

DivX Registration Code ..........................................59

Deactivation ..............................................................60

II

CONTENTS

EPG (ELECTRONIC PROGRAMME

GUIDE) (IN DIGITAL MODE)

Switch on/off EPG .................................................. 61

Select a Programme................................................ 61

Button Function in NOW/NEXT Guide Mode.. 61

Button Function in 8 Day Guide Mode...............62

Button Function in Date Change Mode............. 62

Button Function in Extended Description Box. 63

Button Function in Record/Remind Setting Mode ...... 63

Button Function in Schedule List Mode............. 63

PICTURE CONTROL

Picture Size (Aspect Ratio) Control................... 64

Picture Wizard...........................................................66

Energy Saving ............................................................67

Preset Picture Settings

- Picture Mode-Preset........................................ 68

Manual Picture Adjustment

- Picture Mode-User option ............................. 69

Picture Improvement Technology........................ 70

Expert Picture Control........................................... 71

Picture Reset ............................................................ 74

Power Indicator .........................................................75

Demo Mode.............................................................. 76

Mode Setting.............................................................77

SOUND & LANGUAGE CONTROL

Auto Volume Leveler............................................... 78

Clear Voice II .............................................................79

Preset Sound Settings - Sound Mode................ 80

Sound Setting Adjustment -User Mode..............81

SRS TruSurround XT............................................... 81

Balance ...................................................................... 82

TV Speakers On/ Off Setup ..................................83

DTV Audio setting (In Digital Mode only) . . .84

Selecting Digital Audio Out...................................85

Audio Reset ...............................................................86

Audio Description (In Digital Mode only)..........87

I/II

- Stereo/Dual Reception (In Analogue Mode

Only)...................................................................... 88

- NICAM Reception (In Analogue Mode Only).... 89

- Speaker Sound Output Selection................. 89

On-Screen Menu Language/Country Selection.. 90

Language Selection (In Digital Mode only) ...... 91

TIME SETTING

Clock Setup.............................................................. 92

Auto On/ Off Time Setting................................... 93

Sleep Timer Setting ................................................ 94

PARENTAL CONTROL / RATINGS

Set Password & Lock System ............................... 95

Block Programme .................................................... 96

Parental Control (In Digital Mode only)............ 97

External Input Blocking...........................................98

Key Lock.................................................................... 99

TELETEXT

Switch on/off......................................................... 100

SIMPLE Text ........................................................... 100

TOP Text................................................................. 100

FASTEXT.................................................................. 101

Special Teletext Functions................................... 101

DIGITAL TELETEXT

Teletext within Digital Service............................ 102

Teletext in Digital Service.................................... 102

APPENDIX

Troubleshooting .................................................... 103

Maintenance ......................................................... 105

Product Specifications......................................... 106

IR Codes ................................................................. 109

External Control Device Setup ........................... 110

A-1

PREPARATION

ACCESSORIES

LCD TV Models : 32/37/42/47/55SL8

***

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

■

Image shown may differ from your TV.

Owner’s Manual Batteries

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains

or fingerprints on the

surface of the TV with

the polishing cloth.

Do not use excessive force.

This may cause scratching

or discolouration.

P

O

W

E

R

P

O

W

E

R

T

V/RA

D

T

V/RA

D

R

A

R

A

T

IO

T

IO

A

V M

OD

E

V MO

D

E

M

A

R

K

M

A

R

K

FAV

Cable management

clip

Ferrite Core

(

This item is not included for

all models.

)

Protection

Cover

Install the power plug closely.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

x 8

Bolts for stand assembly

(

Except for

55SL8

***

)

Wall Mounting Bracket(Separate purchase)

(32SL8

***

)

RW230

(32/37/42/47SL8

***

)

AW-47LG30M

AW-55LH40M

(55SL8

***

)

Cable Holder

12mm

Use screws 12mm(+0.5/-0.5) long on the SET

assembly side. (Only 37/42/47SL8

***

)

Set assembly side

(without guide spacer)

Set assembly side

(with guide spacer)

Guide spacer

A-2

PREPARATION

Main Power Switch

OFF ON

FRONT PANEL CONTROLS

■

Image shown may differ from your TV.

G

When the TV cannot be turned on with the remote control, press the main power button on the TV.

(When the power is turned off with the main power button on the TV, it will not be turned on with the

remote control).

G

Do not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall.

G

Do not drag the TV. The floor or the product may be damaged.

CAUTION

NOTE

!

G

TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of brightness of the picture is

reduced, and this will reduce the overall running cost.

INPUT

MENU

OK

P

PROGRAMME VOLUME

MENU

OK

INPUT

POWER

(Only 37/42/47/55SL8

***

)

Main Power Switch

OFFON

(Only 32SL8

***

)

Intelligent Sensor

Adjusts picture according

to the surrounding

conditions.

Remote Control

Sensor

Power/Standby Indicator

•

Illuminates red in standby mode.

•

Illuminates blue when the TV is switched on.

A-3

PREPARATION

BACK PANEL INFORMATION

A

Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The voltage is indi-

cated on the Specifications page. (

GG

p.106~107

) Never

attempt to operate the TV on DC power.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

Headphone Socket

Plug the headphone into the headphone socket.

Component Input

Connect a component video/audio device to

these jacks.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

Antenna Input

Connect antenna or cable to this jack.

Audio/Video Input

Connect audio/video output from an external

device to these jacks.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory Card

International Association) Card Slot

Insert the CI Module to

PPCCMMCCIIAA CCAARRDD SSLLOOTT..

(This feature is not available in all countries.)

1

2

3

4

5

6

7

8

9

10

11

12

13

H/P

AV IN 3

L/MONO

R

AUDIOAUDIO

VIDEOVIDEO

HDMI IN 4

11

H/P

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI IN 4

1

HDMI

/ DVI IN

3

2

1(DVI)

H/P

(RGB)

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI IN 4

2 43 75 6

108 9

H/P

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI IN 4

12

13

2

A-4

PREPARATION

STAND INSTALLATION

(

Except for

55SL8

***

)

1

3

4

Carefully place the TV screen side down on a cush-

ioned surface to protect the screen from damage.

2

Assemble the parts of the

SSttaanndd BBooddyy

with

the

SSttaanndd BBaassee

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

Stand Body

Stand Base

■

Image shown may differ from your TV

When assembling the desk type stand, check whether the

bolt is fully tightened. (If not tightened fully, the product

can tilt forward after the product installation.) If you tight-

en the bolt with excessive force, the bolt can deviate from

abrasion of the tightening part of the bolt.

BACK COVER FOR WIRE

ARRANGEMENT

■

Image shown may differ from your TV.

Install the CABLE MANAGEMENT CLIP as

shown.

1

CABLE MANAGEMENT CLIP

Connect the cables as necessary. To connect

additional equipment, see the EXTERNAL

EQUIPMENT SETUP section.

2

NOTE

!

GG

Do not use the CABLE MANAGEMENT CLIP to

lift the TV.

- If the TV is dropped, you may be injured or the

TV may be damaged.

After Connecting the cables as necessary,

install CABLE HOLDER as shown and bundle

the cables. To connect additional equipment,

see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

CABLE HOLDER

FOR DESK-TYPE STAND

FOR WALL MOUNT

A-5

PREPARATION

KENSINGTON SECURITY SYSTEM

■

This feature is not available for all models.

■

Image shown may differ from your TV.

The TV is equipped with a Kensington Security

System connector on the back panel. Connect the

Kensington Security System cable as shown below.

For the detailed installation and use of the Kensington

Security System, refer to the user’s guide provided

with the Kensington Security System.

For further information, contact http://www.kensing-

ton.com, the internet homepage of the Kensington

company. Kensington sells security systems for expensive electron-

ic equipment such as notebook PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

NOTES

a. If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

b. Some minute dot defects may be visible on the

screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the moni-

tor's performance.

c. Avoid touching the LCD screen or holding your finger(s)

against it for long periods of time.

Doing so may produce some temporary distortion

effects on the screen.

CAREFUL INSTALLATION ADVICE

A

You should purchase necessary components to fix the TV

safety and secure to the wall on the market.

A

Position the TV close to the wall to avoid the possibility

of it falling when pushed.

A

The instructions shown below are a safer way to set up

the TV, by fixing it to the wall, avoiding the possibility of

it falling forwards if pulled. This will prevent the TV from

falling forward and causing injury. This will also prevent

the TV from damage. Ensure that children do not climb

or hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough

to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the

bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and tight-

en them securely in the upper holes.

Secure the wall brackets with the bolts on the wall.

Match the height of the bracket that is mounted on

the wall.

3

Use a sturdy rope to tie the product for alignment. It

is safer to tie the rope so it becomes horizontal

between the wall and the product.

2

1

2

1

SWIVEL STAND

■

Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20 degrees

to suit your viewing position.

A-6

PREPARATION

A

The TV can be installed in various ways such as on

a wall, or on a desktop etc.

A

The TV is designed to be mounted horizontally.

Power Supply

Circuit breaker

EARTHING

Ensure that you connect the earth wire to prevent

possible electric shock. If grounding methods are not

possible, have a qualified electrician install a separate

circuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

WALL MOUNT: HORIZONTAL

INSTALLATION

A

We recommend the use of a LG Brand wall mounting

bracket when mounting the TV to a wall.

A

We recommend that you purchase a wall mounting

bracket which supports VESA standard.

A

LG recommends that wall mounting be performed by a

qualified professional installer.

4 inches

NOTE

!

G Should Install wall mount on a solid wall perpendicular to

the floor.

G Should use a special wall mount, if you want to install it to

ceiling or slanted wall.

G The surface that wall mount is to be mounted on should

be of sufficient strength to support the weight of TV set;

e.g. concrete, natural rock, brick and hollow block.

G Installing screw type and length depends on the wall

mount used. Further information, refer to the instructions

included with the mount.

G LG is not liable for any accidents or damage to property or

TV due to incorrect installation:

- Where a non-compliant VESA wall mount is used.

- Incorrect fastening of screws to surface which may cause

TV to fall and cause personal injury.

- Not following the recommended Installation method.

AA

BB

4 inches

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4”

(10cm) all around the TV.

■

Image shown may differ from your TV.

When installing the wall-mounted unit, use

the protection cover.

NOT USING THE

DESK-TYPE STAND

Insert the

PPRROOTTEECCTTIIOONN

CCOOVVEERR

into the TV until

clicking sound.

PROTECTION COVER

Model

VESA

(A

*

B)

Standard

Screw

Quantity

32SL8***

37/42/47SL8***

55SL8***

200

*

10 0

200

*

200

400

*

400

M4

M6

4

4 inches

A-7

PREPARATION

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

POWER

TV/RAD

RATIO

AV MODE

MARK

FAV

POWER

TV/RAD

ENERGY SAVING

INFO i

INPUT

Switches the TV on from standby or off to standby.

Selects Radio, TV and DTV channel.

Adjust the Energy Saving mode of the TV.(

GG

pp..6677

)

Shows the present screen information.

External input mode rotate in regular sequence.

(

GG

pp..3300

)

0~9 number

button

LIST

Q.VIEW

Selects a programme.

Selects numbered items in a menu.

Displays the programme table.

(

GG

pp..2288

)

Returns to the previously viewed programme.

MENU

Q. MENU

THUMBSTICK

(Up/Down/Left/Right)

OK

GUIDE

RETURN(EXIT)

Selects a menu.

Clears all on-screen displays and returns to TV viewing

from any menu.(

GG

pp..1155

)

Select the desired quick menu source. (Aspect Ratio,

Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep

Timer, Favourite, USB Device).(

GG

pp..1144

)

Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

Accepts your selection or displays the current mode.

Shows programme schedule.(

GG

pp..6611

)

Allows the user to move return one step in an interactive

application, EPG or other user interaction function.

Coloured

buttons

These buttons are used for teletext (on

TTEELLEETTEEXXTT

models only) ,

PPrrooggrraammmmee eeddiitt

.

TELETEXT

BUTTONS

SUBTITLE

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.(

GG

pp..110000

)

Recalls your preferred subtitle in digital mode.

1

A-8

PREPARATION

POWER

TV/RAD

RATIO

AV MODE

MARK

FAV

VOLUME UP

/DOWN

FAV

MARK

MUTE

Programme

UP/DOWN

PAGE

UP/DOWN

Adjusts the volume.

Displays the selected favourite programme.

Select the input to apply the Picture Wizard settings.

Check and un-check programmes in the USB menu.

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the next

one.

RATIO

AV MODE

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(

GG

pp..3344

)

Selects your desired Aspect Ratio of picture.(

GG

pp..6644

)

It helps you select and set images and sounds when

connecting AV devices.(

GG

pp..3377

)

Installing Batteries

■

Open the battery compartment cover on the back and install the

batteries matching correct polarity (+with +,-with -).

■

Install two 1.5V AAA batteries. Do not mix old or used batteries

with new ones.

■

Close cover.

SIMPLINK /

USB Menu

control buttons

Controls SIMPLINK or USB menu(Photo List and Music

List or Movie List ).

A-9

PREPARATION

ACCESSORIES

LED LCD TV Models : 42/47SL9

***

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the

dealer where you purchased the TV.

■

Image shown may differ from your TV.

Owner’s Manual Batteries

Remote Control

Power Cord

Polishing Cloth

Polishing cloth for

use on the screen.

This item is not included for all models.

* Lightly wipe any stains

or fingerprints on the

surface of the TV with

the polishing cloth.

Do not use excessive force.

This may cause scratching

or discolouration.

POWER

A

V

M

O

D

E

N

E

R

G

Y

S

A

V

IN

G

P

A

G

E

P

F

A

V

MARK/

MUTE

ON/OFF

123

45

0

6

789

L

IS

T

Q

.V

IEW

INPUT

MENU

RATIO

Q

.M

E

N

U

R

E

T

U

R

N

E

X

I

T

G

U

ID

E

IN

F

O

OK

TV/RAD

Ferrite Core

(

This item is not included for

all models.

)

Install the power plug closely.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic

wave when connecting the power cord.

The closer the location of the ferrite core to the power

plug, the better it is.

Wall Mounting Bracket

(Separate purchase)

AW-47LG30M

12mm

Use screws 12mm(+0.5/-0.5) long on the SET assembly side.

Set assembly side

(without guide spacer)

Set assembly side

(with guide spacer)

Guide spacer

Cable management

clip

Stand rear cover

Bolts for stand assembly

Cable Holder

20mm

x 3 x 4

16mm

OK

TV/INPUT

x 2

(Only 42/47SL9000,

42/47SL9100)

(Only 42/47SL9500,

42/47SL9600)

A-10

PREPARATION

FRONT PANEL CONTROLS

■

Image shown may differ from your TV.

G

When the TV cannot be turned on with the remote control, press the main power button on the TV.

(When the power is turned off with the main power button on the TV, it will not be turned on with the

remote control).

G

Do not step on the glass stand or subject it to any impact.

It may break, causing possible injury from fragments of glass, or the TV may fall.

G

Do not drag the TV. The floor or the product may be damaged.

CAUTION

NOTE

!

G

TV can be placed in standby mode in order to reduce the power consumption. And TV should be

switched off using the power switch on the TV if it will not be watched for some time, as this will

reduce energy consumption.

The energy consumed during use can be significantly reduced if the level of brightness of the picture is

reduced, and this will reduce the overall running cost.

Main Power Switch

OFF ON

INPUT

MENU

OK

P

PROGRAMME

VOLUME

MENU

OK

INPUT

POWER

Intelligent Sensor

Adjusts picture according to

the surrounding conditions.

Remote Control Sensor

Power/Standby Indicator

•

Illuminates red in standby mode.

• Illuminates white when the TV is switched on.

A-11

PREPARATION

BACK PANEL INFORMATION

A

Image shown may differ from your TV.

Power Cord Socket

This TV operates on an AC power. The voltage is indi-

cated on the Specifications page. (

GG

p.108

) Never

attempt to operate the TV on DC power.

HDMI/DVI IN Input

Connect an HDMI signal to HDMI IN. Or DVI

(VIDEO) signal to HDMI/DVI port with DVI to

HDMI cable.

RGB IN Input

Connect the output from a PC.

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

This port is used for Service or Hotel mode.

Headphone Socket

Plug the headphone into the headphone socket.

Component Input

Connect a component video/audio device to

these jacks.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an

external device to these jacks.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

OPTICAL DIGITAL AUDIO OUT

Connect digital audio to various types of equipment.

Connect to a Digital Audio Component.

Use an Optical audio cable.

Antenna Input

Connect antenna or cable to this jack.

USB Input

Connect USB storage device to this jack.

PCMCIA (Personal Computer Memory Card

International Association) Card Slot

Insert the CI Module to

PPCCMMCCIIAA CCAARRDD SSLLOOTT..

(This feature is not available in all countries.)

1

2

3

4

5

6

7

8

9

10

11

12

ANTENNA

IN

L/MONO

R

AUDIO

VIDEO

CABLE IN

1

HDMI

/ DVI IN

3

2

1(DVI)

H/P

(RGB)

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI IN 4

2 43 75 6

108 9

H/P

AV IN 3

L/MONO

R

AUDIO

VIDEO

HDMI IN 4

11

12

2

CAUTION

G

Use a product with the following thickness

for optimal connection to HDMI cable

(Only HDMI IN 4) / USB device.

*A 10mm

A-12

PREPARATION

1

3

4

Carefully place the TV screen side down on a cush-

ioned surface to protect the screen from damage.

2

Assemble the parts of the

SSttaanndd BBooddyy

with

the

SSttaanndd BBaassee

of the TV.

Assemble the TV as shown.

Fix the 4 bolts securely using the holes in the

back of the TV.

Stand Body

Stand Base

20mm

16mm

5

Install the

SSTTAANNDD RREEAARR CCOOVVEERR

as shown.

(Only 42/47SL9500, 42/47SL9600)

STAND INSTALLATION

■

Image shown may differ from your TV

When assembling the desk type stand, check whether the

bolt is fully tightened. (If not tightened fully, the product

can tilt forward after the product installation.) If you

tighten the bolt with excessive force, the bolt can deviate

from abrasion of the tightening part of the bolt.

CAREFUL INSTALLATION ADVICE

A

You should purchase necessary components to fix the TV

safety and secure to the wall on the market.

A

Position the TV close to the wall to avoid the possibility

of it falling when pushed.

A

The instructions shown below are a safer way to set up

the TV, by fixing it to the wall, avoiding the possibility of

it falling forwards if pulled. This will prevent the TV from

falling forward and causing injury. This will also prevent

the TV from damage. Ensure that children do not climb

or hang from the TV.

NOTE

!

G

When moving the TV undo the cords first.

G

Use a platform or cabinet strong and large enough

to support the size and weight of the TV.

G

To use the TV safely make sure that the height of the

bracket on the wall and on the TV is the same.

3

1

2

Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and tight-

en them securely in the upper holes.

Secure the wall brackets with the bolts on the wall.

Match the height of the bracket that is mounted on

the wall.

3

Use a sturdy rope to tie the product for alignment. It

is safer to tie the rope so it becomes horizontal

between the wall and the product.

2

1

2

1

STAND REAR

COVER

A-13

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

■

Image shown may differ from your TV.

NOTE

!

GG

Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

After Connecting the cables as necessary,

install CABLE HOLDER as shown and bundle

the cables. To connect additional equipment,

see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

FOR DESK-TYPE STAND

FOR WALL MOUNT

Install the CABLE MANAGEMENT CLIP as

shown.

1

CABLE MANAGEMENT CLIP

Connect the cables as necessary. To connect

additional equipment, see the EXTERNAL

EQUIPMENT SETUP section.

2

CABLE HOLDER

Only 42/47SL9000, 42/47SL9100

Only 42/47SL9500, 42/47SL9600

After Connecting the cables as necessary,

install CABLE HOLDER as shown and bundle

the cables. To connect additional equipment,

see the

EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp

section.

1

CABLE HOLDER

A-14

PREPARATION

A

The TV can be installed in various ways such as on

a wall, or on a desktop etc.

A

The TV is designed to be mounted horizontally.

Power Supply

Circuit breaker

EARTHING

Ensure that you connect the earth wire to prevent

possible electric shock. If grounding methods are not

possible, have a qualified electrician install a separate

circuit breaker.

Do not try to earth the TV by connecting it to tele-

phone wires, lightening rods or gas pipes.

WALL MOUNT: HORIZONTAL

INSTALLATION

A

We recommend the use of a LG Brand wall mounting

bracket when mounting the TV to a wall.

A

We recommend that you purchase a wall mounting

bracket which supports VESA standard.

A

LG recommends that wall mounting be performed by a

qualified professional installer.

4 inches

NOTE

!

G Should Install wall mount on a solid wall perpendicular to

the floor.

G Should use a special wall mount, if you want to install it to

ceiling or slanted wall.

G The surface that wall mount is to be mounted on should

be of sufficient strength to support the weight of TV set;

e.g. concrete, natural rock, brick and hollow block.

G Installing screw type and length depends on the wall

mount used. Further information, refer to the instructions

included with the mount.

G LG is not liable for any accidents or damage to property or

TV due to incorrect installation:

- Where a non-compliant VESA wall mount is used.

- Incorrect fastening of screws to surface which may cause

TV to fall and cause personal injury.

- Not following the recommended Installation method.

AA

BB

4 inches

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4”

(10cm) all around the TV.

Model

VESA

(A

*

B)

Standard

Screw

Quantity

42/47SL9***

200

*

200 M6 4

4 inches

SWIVEL STAND

■

Image shown may differ from your TV.

After installing the TV, you can adjust the TV set

manually to the left or right direction by 20 degrees

to suit your viewing position.

A-15

PREPARATION

POWER

AV

MODE

ENERGY SAVING

P

A

G

E

P

FAV

MARK/

MUTE

ON/OFF

123

45

0

6

789

LIST

Q.VIEW

INPUT

MENU

RATIO

Q.MENU

RETURN

EXIT

GUIDE

INFO

OK

TV/RAD

MENU

RATIO

Q. MENU

THUMBSTICK

(Up/Down/Left/Right)

OK

GUIDE

INFO i

RETURN(EXIT)

Selects a menu.

Clears all on-screen displays and returns to TV viewing

from any menu.(

GG

pp..1155

)

Selects your desired Aspect Ratio of picture.(

GG

pp..6644

)

Select the desired quick menu source. (Aspect Ratio,

Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep

Timer, Favourite, USB Device).(

GG

pp..1144

)

Allows you to navigate the on-screen menus and adjust

the system settings to your preference.

Accepts your selection or displays the current mode.

Shows programme schedule.(

GG

pp..6611

)

Shows the present screen information.

Allows the user to move return one step in an interactive

application, EPG or other user interaction function.

0~9 number

button

LIST

Q.VIEW

Selects a programme.

Selects numbered items in a menu.

Displays the programme table.

(

GG

pp..2288

)

Returns to the previously viewed programme.

REMOTE CONTROL KEY FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

POWER

ON/OFF

TV/RAD

ENERGY SAVING

AV MODE

INPUT

Switches the TV on from standby or off to standby.

Key lighting on or off.

Selects Radio, TV and DTV channel.

Adjust the Energy Saving mode of the TV.(

GG

pp..6677

)

It helps you select and set images and sounds when

connecting AV devices.(

GG

pp..3377

)

External input mode rotate in regular sequence.

(

GG

pp..3300

)

Coloured

buttons

These buttons are used for teletext (on

TTEELLEETTEEXXTT

models only) ,

PPrrooggrraammmmee eeddiitt

.

A-16

PREPARATION

POWER

AV

MODE

ENERGY SAVING

P

A

G

E

P

FAV

MARK/

MUTE

ON/OFF

123

45

0

6

789

LIST

Q.VIEW

INPUT

MENU

RATIO

Q.MENU

RETURN

EXIT

GUIDE

INFO

OK

TV/RAD

VOLUME UP

/DOWN

MARK

FAV

MUTE

Programme

UP/DOWN

PAGE

UP/DOWN

Adjusts the volume.

Select the input to apply the Picture Wizard settings.

Check and un-check programmes in the USB menu.

Displays the selected favourite programme.

Switches the sound on or off.

Selects a programme.

Move from one full set of screen information to the next

one.

See a list of AV devices connected to TV.

When you toggle this button, the Simplink menu

appears at the screen.(

GG

pp..3344

)

SIMPLINK /

USB Menu

control buttons

Controls SIMPLINK or USB menu(Photo List and Music

List or Movie List ).

1

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.(

GG

pp..110000

)

Recalls your preferred subtitle in digital mode.

TELETEXT

BUTTONS

SUBTITLE

1

Installing Batteries

■

Open the battery compartment cover on the back and install the

batteries matching correct polarity (+with +,-with -).

■

Install two 1.5V AAA batteries. Do not mix old or used batteries

with new ones.

■

Close cover.

Page is loading ...

LG 47SL9000 User manual

LG 47SL9000 User manual

Related papers

Other documents