2. Apogee
  3. Digidesign MBox

Apogee Digidesign MBox, Mini-DAC, Mini-Me Setup Manual

  • Hello! I am an AI chatbot trained to assist you with the Apogee Digidesign MBox Setup Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ApogeeApogeeConnnects : MiniMe - MiniDac - Digidesign MBox
Hardware Connections
Mic Input
(WE-XX-5.0)
Analog Outs
(WE-XX-5.0)
Hardware Settings
Set for
desired gain
Set for desired
sample rate
(up to 48kHz)
S/PDIF CX
Software Settings
After making all the hardware connections, open Pro Tools
software. Under Setups select Hardware Setup.
In the Hardware Setup page, set Clock Source to S/PDIF,
and set Ch. 1-2 Input Source to S/PDIF.
As configured above, Pro Tools software inputs are routed
from the Mini-Me’s hardware inputs, and Pro Tools software
ouputs are routed to both the MiniDAC’s and MBox’s
hardware outputs. Also, note that the MiniMe’s DIR-USB
and MON knobs are not used.
S/PDIF
WE-RR-1.0
S/PDIF
WE-RR-1.0
/