Sunjoy L-GZ071PST-3 Assembly Instructions Manual

Brand: Sunjoy

Model: L-GZ071PST-3

Type: Assembly Instructions Manual

Sunjoy L-GZ071PST-3 10'x10' Garden Scape Gazebo is a durable and versatile outdoor structure perfect for creating a shaded and relaxing area in your garden or patio. With its sturdy frame made from powder-coated steel and a water-resistant canopy, this gazebo is built to withstand the elements and provide years of enjoyment. Assembly is simple and can be completed with the included tools and hardware. The gazebo features a double-tiered canopy for added shade and privacy, and the panels can be easily removed to create an open-air structure.

10’X10’ GARDEN SCAPE GAZEBO

Style# L-GZ071PST-3

DPCI：009-05-0544

>>assembly instructions

Congratulations on your latest Target purchase

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work

for you. All you need to do is follow our simple instructions and you’ll be on your way

transforming your room in on time. Good luck-though we’re confident you won’t need it.

Before you begin

1, Check for damaged for missing parts. Call 1-866-578-6965 to order missing supplies

2, Use the carton as a working surface to prevent product damage during assembly

3, Gather all tools prior to assembly

Warning:

1． THIS UNIT IS HEAVY!

2． Do not assemble this item alone for safety. Two persons are necessary.

3． Some parts may contain sharp edges – especially as noted in manual. Wear protective gloves if necessary.

4． Do not play with the construction of the arbor. Children and pets should be supervised when they are in area of the arbor. Do not allow the

gate or the side panel to collide hard to avoid danger.

5． Read all instructions before assembly and using this product.

6． Select ideal location. Set out all parts on a clear and level surface prior to assembly. Ideally, the gazebo frame should be set up in its desired

location to avoid moving it after assembly.

7． Use caution. During all the process of assembling, especially when lifting heavy or large parts, pay attention to safety.

8． Tools and Assistance. Ladder and wrench are self-provided. Whenever possible, assistance is preferred.

9． Check for parts available. Before assembling your gazebo, be sure that you have all parts described in the Parts List.

10． Check for damaged parts. Before assembling your gazebo, check for damaged parts, any part that appear damaged should be carefully

checked to determine that it will be operated properly and perform its intended function. Any part that is damaged should be properly repaired

or replaced by a qualified technician.

11． Refer to assembly diagram. During assembly, it will be helpful to referring to the assembly diagram.

12． Keep children away. Children must never be allowed in the work area. Do not let them handle parts and tools. No people will be permitted to

enter into work area except who is working.

13． Caution for fabric: Keep all flame and heat sources away from this gazebo fabric. This gazebo is made with fabric that meets CPAI-84

specifications for flame resistance. It is not fire proof. The fabric will burn with continuous contact with any flame source.

Tools needed

Table of contents

Introduction 2-4

Hardware 5

Parts list 6

Assembly 7-10

>>assembly instructions

QUESTION? Just call 1-866-578-6965 parts and service . For faster service, have the style number and DPCI number ready when calling.

Hardware Pack

Spare Hardware Pack

(H1) x 16

M6×20mm

(H3) x 32

M6 flat washer

(PP)x1

Touch up paint

（H6）x1

M6 Wrench

(H1) x 2

M6×20m

(H2) x 2

M6×32mm

(H3) x 4

M6 washer

(H2) x 8

M6×32mm

(H4) x 8

M6 Nut

(H4) x 2

M6 Nut

(H5) x 8

Plastic cap

(H5) x 2

Plastic cap

Parts List

ITEM DESCRIPTION QUANTITY

A Panel 4

B Beam 4

C Top Center fitting 2

D Corner Supporting Bar-Short 4

E Corner Supporting Bar-Long 4

F Medium Supporting Bar 4

G Privacy panel 1

H stake 8

J Larger Canopy 1

K Top Canopy 1

Step 1:

Connect Panel(A) & beam (B) with

Screw(H1) & wrench(H6). (As

Fig.1). Do not tighten fully.

(H1) x 16

M6×20mm screw

(H3) x 16

M6 washer

(H6) x 1

M6 Wrench

Turn over the shelf before

assembling as the shelf only

can spread by one direction.(As

shown in Fig.2)

Step 2:

Connect corner supporting

bar-short(D) with corner supporting

bar-long(E). (As shown in Fig.3)

(H2) x 8

M6×32mm screw

(H3) x 16

M6 washer

(H5) x 8

Plastic Cap

(H4) x 8

M6 Nut

Connect Corner Supporting Bar

–Long (E) and Medium Supporting

Bar (F) with and Top Center fitting

（C）.(As shown in Fig.4)

Attach panel(A) to corner

supporting bar-short（D） by using

H2,H3,H4.(As shown in Fig.5 )

Attach Medium Supporting Bar(F) to

beam(B) by using H2,H3,H4.; then tighten

all the screw, and attach plastic cap(H5) to

nut(H4).

(H6) x 1

M6 Wrench

Step 3

Attach larger canopy (J) to frame, do not spread, then

attach top canopy, then outspread the larger canopy.

Fix the finished gazebo with stake (H) by hammer .(As

shown in Fig.7)

Please use Shade cloth as needed.

Limited Warranty:

This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item

is maintained with care and used only for personal, residential purposes.

The item is warranted to be free from defects in material or workmanship for a period of 6 months. We don't reimburse for transportation or

delivery costs, or compensate the individual or any outside party for assembling or disassembling the product.

Exclusions:

Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or

improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for

warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style

and color, or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow exclusions or

limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may

also have other rights, which vary from state to state.

Maintenance:

Our iron/steel components for garden accessories and furniture are coated with rust inhibiting paint that protects it from rusting. However, due

to the nature of iron, surface oxidation (rusting) will occur once these protective coatings are scratched. This is a natural process and is not a

defect! To minimize this condition, we recommend care when assembling & handling the product to prevent scratching the paint. Should any

scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can also be easily removed with a very

light application of common cooking oil. If surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start

dripping on to deck or patio and cause damaging stains, which may be difficult to remove. This can be prevented if measure is taken to keep

the product from oxidizing.

Important: Please do not return this product to the store. For technical assistance on assembly or replacement parts Please do not return

this product to the store, call Sunjoy Industries at 1(866) 578-6569 from 8:30 AM to 5:30 EST Monday to Friday or fax the replacement part

form which put into the package to (740)-283-3549 or Email T[email protected] for assistance.

Sunjoy L-GZ071PST-3 Assembly Instructions Manual

Brand: Sunjoy

Model: L-GZ071PST-3

Type: Assembly Instructions Manual

Download PDF

report

Sunjoy L-GZ071PST-3 Assembly Instructions Manual

Sunjoy L-GZ071PST-3 Assembly Instructions Manual

Related papers

Other documents