Page is loading ...
Optical Wireless Router
Quick Start Guide
Package Contents
The following items should be found in your package:
wireless Router
DC Power Adapter for the wireless Router
Quick Installation Guide
Installation Environments
Place the router level
Adjusting the angle of the antenna to right direction
Place the router as far as possible away from the heating device
Do not place the router dirty or damp places
Specifications
Operating Temperature: 0℃～40℃;
Operating Humidity 10％~90％No-condensing.
Storage Temperature: -40℃～70 .
Storage Humidity 5％~90％No-condensing.
DC output: DC 9V/1A
Installation
Setting IP address manually
On the Windows taskbar, click the Start,
＞control panel＞network connections：on the native connect click
right button,and choose the property
choice Internet agreement（TCP/IP），click property 、you can see below window：
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
TCP/IP window ，choose free obtain IP and free obtain DNS; then click the OK
2. Testing Network Connection
On the Windows taskbar, click the Start button, select Run, Enter Cmd command in the
box, now you can run the Ping command to verify the network connection, type ping 192. 168.111. 1, and then
press Enter, if the result displayed is similar to the following page, it means the connection between your
PC and the router has been established well.
If the result displays “Destination host reachable”, it means the connection between
your PC and the router is failed.
3. Accessing WEB page of the Router
Open a web-browser and type in the default address http://192.168.111.1 in the
address field of the browser. After a moment, a login window will appear,
enter admin for the User Name and Password, both in lower case letters. Then click the OK button or press the Enter
key. After successfully login, you can see the router’s home page
and view below window:
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
You will view the window have three mode;you can choose any one for your using ;
4 Operation Mode seting
1) Gateway;
When your choose the gateway mode; then click the
internet settings;and click the wan window will appear, then
you choose the pppoe(ADSL) in the wan connection type;
type in the user name and passwords by your ISP; click the Apply; seting in finish you can connect internet;
;
2)AP client
When your choose the AP client mode; and click the Apply, the pc will re– connect, when appear below widow;
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
then click the
wireless settings;and click the AP client, below window will appear, then you Click scan AP;
When you view below window, then choose one Wireless router OR AP for connect;
And keep Securitymode, encryption same you choosed ROUTER ;and import the passwords;
Click OK, finish the seting,you can connect the internet,
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
3)Bridge
When your choose the bridge mode; and click the Apply, the pc will re– connect, when the router comeback below
widow;
WDS MODE: WDS have 3 mode see below photos;
There are three WDS Mode: Lazy Mode, Bridge Mode and Repeater Mode, pls refer to the following picture:
1)LazyMode:InputthesideAP’sSSIDinsteadofBSSID(MACAdd)inthismode.
2)BridgeMode: When theAP is usedfor WDS equipment,theclientcan’t connect with AP, the user should input
thesideAP’sBSSID(MACADD)inthismode.
3)RepeaterMode:Inthismode,theclientcanconnectwiththesideAP,buthavetoinputthesideAP’sBSSID(MAC
ADD)
Notice:RepeaterModeisberecommended
TheNoticeofhowtosetWDSModeInWDSMode:
1)TheChannelofthetwoAPmustbesame
2)TheBandwidthofChannelshouldbesame,ifchoose20/40,theExtended Channelshouldbesame.
3)You’sbettertouse20MBandwidthiftheAPcan’tsettheExtended Channel
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
WWW.ALTERNETIVO.CZ
FG-WDM-100Mbps-1310-WIFI
WWW.ALTERNETIVO.CZ
/