Altronix NetWaySP1P Installation guide

Brand: Altronix

Model: NetWaySP1P

Type: Installation guide

Altronix NetWaySP1P is a powered media converter/injector that converts 10/100/1000 Mbps ethernet to Fiber (1000Base-X/SX/LX) and provides PoE. It is IEEE 802.3at (30W) compliant and can be used with 4-pair CAT5e and higher cables. The NetWaySP1P has one 1Gb SFP port and one Ethernet port. The SFP port can be used with an SFP module that is compliant with Class 1 laser product (not included). The Ethernet port has auto-crossover capability. The NetWaySP1P is powered via 24VDC-56VDC and is not intended to be connected to outside plant leads.

NetWaySP1P - 1 -

Overview:

Altronix NetWaySP1P powered media converter/injector converts 10/100/1000 Mbps

ethernet to Fiber (1000Base-X/SX/LX) and provides PoE.

Features:

Rev. 053117

Installation Guide

NetWaySP1P

Powered Media Converter/Injector

Agency Listings:

• CE approved.

Input:

• [email protected]@0.75A.

Fiber Port:

• One (1) 1Gb SFP port.

• Use with SFP module 1000Base-X (1Gb),

compliant to Class 1 laser product

(not included).

Ethernet:

• IEEE 802.3at (30W) compliant.

• Wire type: 4-pair CAT5e and higher.

• Connectivity: RJ45, auto-crossover.

Ethernet (cont’d):

• Speed: 10/100/1000Mbps.

• Distance: up to 100m.

LED Indicators:

• PoE Green LED: Indicates PoE present

(unit is powered on).

• Fiber Signal Green LED:

Indicates SFP connection.

Environmental:

• Refer to Environmental Conditions on page 3.

Dimensions (W x L x H approx.):

3.375” x 3.8” x 1”

(85.7mm x 96.52mm x 25.4mm).

Installation Instructions:

Unit is powered via 24VDC-56VDC. NetWaySP1P is not intended to be connected to outside

plant leads and should be installed indoors within the protected premises.

1. Mount NetWaySP1P in desired location utilizing the mounting hole (Fig. 1a, pg. 1).

Use a proper fastener and/or wall anchor when securing NetWaySP1P with screw through

its mounting hole to the wall.

2. Connect 24VDC-56VDC power source to terminals marked [24-56VDC -- Input +].

Terminals accomodate up to 12 AWG wires.

3. Connect structured cable from port marked [PoE+ Output] on NetWaySP1P to a

PoE device (Fig. 2, pg. 2).

4. Connect fiber optic cable to a fiber SFP module. Connect the module to the port marked

[SFP] on the NetWaySP1P. Connect the other end of fiber cable to an SFP module of a

remote device. SFP LED will illuminate indicating data connection (Fig. 2, pg. 2).

Fig. 1

Fig. 1a

Structured

Cable to

PoE Device

24VDC to

56VDC

Input

SFP LED

Indicates

data connection

One (1) Gb

SFP port

for Fiber

NetWaySP1P

Media Converter/Injector

Input: 24VDC–56VDC

Output: IEEE 802.3at (30W) and

IEEE 802.3af (15.4W)

compliant.

Made in U.S.A.

www.altronix.com

24-56VDC

-- Input +

PoE+

Output PoE

Fiber

SignalSFP

- 2 - NetWaySP1P

Typical Applications:

Fig. 2

Fig. 3

Fig. 4

115/230VAC

Input

NetWaySP1P

Converts Ethernet

to Fiber & Provides PoE

Fiber

CAT5e/6

PoE+ (30W) PTZ

24-56VDC

Input

Power

Supply

NetWaySP1P

Media Converter/Injector

Input: 24VDC–56VDC

Output: IEEE 802.3at (30W) and

IEEE 802.3af (15.4W)

compliant.

Made in U.S.A.

www.altronix.com

24-56VDC

-- Input +

PoE+

Output PoE

Fiber

SignalSFP

PoE+ (30W) PTZ

115/230VAC

Input

NetWaySP1P

Converts Ethernet

to Fiber & Provides PoE

Fiber

CAT5e/6

24-56VDC Input

Power

Supply

NetWaySP1P

Media Converter/Injector

Input: 24VDC–56VDC

Output: IEEE 802.3at (30W) and

IEEE 802.3af (15.4W)

compliant.

Made in U.S.A.

www.altronix.com

NetWaySP1A

Media Converter/Repeater

Input: PoE Class 1 or Higher

Data: 10/100/1000

PoE /

10/100/1000 InPoE

Fiber

Signal

SFP

www.altronix.com

Made in

U.S.A.

NetWay8E

or Midspan/Endspan

24-56VDC

-- Input +

PoE+

Output PoE

Fiber

SignalSFP

PoE+ (30W) PTZ

NetWaySP1P

Converts Ethernet

to Fiber & Provides PoE

CAT5e/6

NetWaySP1P

Media Converter/Injector

Input: 24VDC–56VDC

Output: IEEE 802.3at (30W) and

IEEE 802.3af (15.4W)

compliant.

Made in U.S.A.

www.altronix.com

Composite

Fiber/Copper

NetWaySP4 Series

24-56VDC

-- Input +

PoE+

Output PoE

Fiber

SignalSFP

NetWaySP1P - 3 -

Technical Specifications:

Parameter Description

Ports

One (1) 1Gb SFP port

One (1) Ethernet port 10/100/1000

Input power

requirements

[email protected]@0.75A.

Indicators

PoE Green LED: Indicates PoE present (unit is powered on)

Fiber Signal Green LED: Indicates SFP connection.

Environmental

Conditions

Operating: -40ºC to 75ºC (-40ºF to 167ºF).

Storage: -40ºC to 75ºC (-40ºF to 167ºF).

Relative Humidity: 85% +/-5%.

Operating Altitude: -304.8 to 2,000m (-1,000 to 6,561.7 ft.).

Weights (approx.)

Product: 0.25 lbs. (0.11 kg), Shipping: 0.3 lbs. (0.14 kg).

- 4 - NetWaySP1P

Altronix is not responsible for any typographical errors.

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty | Made in U.S.A.

NetWaySP1P E31Q

MEMBER

Notes:

Altronix NetWaySP1P Installation guide

Altronix NetWaySP1P Installation guide

Altronix NetWaySP1P Installation guide

Related papers

Other documents