Backyard Creations SRFP41302 User manual

Type
User manual
259-5090
Outdoor Steel Fireplace
Model# SRFP41302
Instructions Manual
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-866-814-0585, 8 a.m. to 8 p.m.,EST
Monday-Friday. Or e-mail: [email protected].
PACKAGE CONTENTS
Part Description Qty Diagram
A Base 1
B Foot 4
C
Side Screen/
Left & Right
2
D
Front
Screen/Door
1
E Back Screen 1
F Chimney 1
G Chimney Cap 1
H Log Rack 1
I Fire Bowl 1
J Poker 1
K Door Handle 1
Hardware List
Part No.
Description Qty Diagram
1
M6x14mm Cross
Head Bolt
16
2 M6 Flange Nut 1
3 Locking Lever 1
4 M6 Wing Nut 8
G
F
C
A
B
J
E
K
D
I
H
WARNINGS AND CAUTIONS
3
fireplace
Do not use under or on combustible structures/surfaces including
wooden decks.
Please read and understand this entire manual before attempting to assemble, operate or
install the product.
fireplace
fireplace
log rack
15
fireplace
fireplace.
fireplace
4
M6 x 14mm Cross Head Bolt
x8
Hardware Used
Step 1: Attach the Feet (B) to the Base (A)
with (8) M6 x 14mm Cross Head Bolt (#1).
Step 2: Assemble Door (D) and Screen Panels
(C) (E) together with (8) M6 x 14mm Cross
Head Bolt (#1).
Step 3: Attach assembled Door (D) and Screen
Panels (C) (E) to the Base (A) with (4) M6 Wing
Nut (#4).
Step 4: Attach the Chimney (F) to the assembled
Door (D) and Screen Panels (C) (E) with (4)
M6 Wing Nut (#4). Place Chimney Cap (G) on
the Chimney (F).
ASSEMBLY INSTRUCTIONS
M6 x 14mm Cross Head Bolt
x8
Hardware Used
M6 Wing Nut x 8
Hardware Used
E
G
F
4
4
B
A
C
1
D
C
Step 7: Assembly Completed.
5
ASSEMBLY INSTRUCTIONS
Step 5: Attach Handle (K) to Door (D) with
Locking Lever (#3) and M6 Flange Nut (#2).
Step 6: Place Fire Bowl (I) into Base (A),
then place Log Rack (H) into Fire Bowl (I).
2
3
D
H
I
K
M6 Flange Nut x1
Locking Lever x1
Hardware Used
6
Lighting Instruction
1. Open the screen door using the fire tool, put the firewood/charcoal on the log rack. Do not
overload this fireplace.
2. Put dry wood scraps under firewood/charcoal, light them. Close the screen.
3. Put fire out!! Make sure the fire is completely out before you leave.
4. Make sure the fire is completely out before you clean the fire bowl.
5. Care, maintain and clean this fireplace.
Inspecting
This fireplace should be inspected on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this fireplace until the fire is COMPLETELY out and cooled down.
1. Check components for any signs of damage or rust.
2. If damage to any component is detected, do not operate until repairs are made.
Cleaning
This fireplace should be cleaned on a regular basis to promote safer experiences and longer product
life.
Note: After repeated use, a slight discoloration of the finish may occur.
DO NOT attempt to clean this fireplace until the fire is COMPLETELY out and cool down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this fireplace in a self-cleaning oven as it may damage its finish.
1. Wipe exterior surface with a mild dishwashing detergent or baking soda.
2. Store this fireplace in a dry location to maximize product life.
3. Clean with water.
Storing
DO NOT move or store this fireplace until the fire COMPLETELY out and cooled down.
1.Once the fire is out (fireplace is cool to the touch), remove ashes and properly dispose.
4. Cover outdoor fireplace with the PVC cover (Not included).
2. Store this fireplace in a dry location to maximize product life.
3. Store assembled in a location away from children and pets.
Safety Instruction
Care and Maintenance
ONE-YEAR LIMITED WARRANTY
7
Need help?
call our toll free number at:
1-866-814-0585 or
e-mail us at:
customerservice@shinerichgroup.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Backyard Creations SRFP41302 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI