BSWPEG4B / BSWPEG4W ASSEMBLY INSTRUCTIONS

Locate each wooden leg. Attach Metal Plates

with Screw (F) and Hex Wrench (L).

Attach black Brace (B) to wooden legs with Screw (F)

and Hex Wrench (L). The Metal Plates with (C) are

located in Back and the Metal Plates with (E) and (D)

are locatedin Front.

Use Hex Wrench (O) to attach Nut (G) and

Plastic Cap (M) over the Screw (F). `

Attach Seat (H) to legs using Hex Wrench (L)

and Washer (N), Flat Washer (I), Spring Washer (J),

and Screw (K).

During assembly, hand tighten screws only. When all screws are in place, you may then tighten all screws completely.