Delta Faucet 1953LF-CZ Specification

Type
Specification

This manual is also suitable for

1953LF
with Escutcheon
1953LF
Submitted Model No.:
Designate proper nish sufx
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-K-1953LF Rev. B
BAR & PREP
SINK FAUCETS
STANDARD SPECIFICATIONS:
WARRANTY
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, Ontario Canada N5P 4L1
© 2014 Masco Corporation of Indiana
• Solid brass fabricated body.
• 360° Rotating spout.
• Hot/Cold logo on handle to indicate temperature.
• Ceramic disc cartriage.
• 2 1/2" max deck thickness.
• 5/16" Staggered copper supply lines with 1/2" adapters.
• ADA compliant lever handle.
• Order RP77702 for optional escutcheon .
• Order RP50781 for coordinating soap dispenser.
• Maximum low rate 1.5 gpm @ 60 psi.
Specic Features:
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and inishes; or,
for commercial users, for 5 years from the date
of purchase.
Single Handle Deck Mount
Transitional
1 or 3 Hole 4" Installation
COMPLIES WITH
• ASME A112.18.1 / CSA B125.1
Ver ied compliant with 0.25% weighted average Pb
content regulations
Indicates compliance to
ICC/ANSI A117.1
2 11/16"
(68 mm)
3 5/8"
(92 mm)
6 5/16"
(160 mm)
2 1/2"
(64 mm)
Max. Deck
Thickness
5/16" O.D.
Copper Tubing
1/2"-14 NPSM
adapters
7 15/16"
(201 mm)
4 13/16"
(122 mm)
6 5/8"
(168 mm)
2 3/16"
(56 mm)
1 1/4"~1 1/2"
(32~38 mm)
Hole Size
12 5/16"
(312 mm)
5 3/8"
(137 mm)
360° spout
swings
Min. 1 3/4" (45 mm)
Clearance to Back
Splash Recommended
  • Page 1 1

Delta Faucet 1953LF-CZ Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI