2. Office
  3. Office furniture
  4. Multimedia carts & stands
  5. Winco
  6. 3-Tier Wire Shelving Cart, Chrome Plated, Double Handle

Winco 3-Tier Wire Shelving Cart, Chrome Plated, Double Handle User manual

  • Hello! I am an AI chatbot trained to assist you with the Winco 3-Tier Wire Shelving Cart, Chrome Plated, Double Handle User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Mobile Wire Shelving Cart
1
Place the shelf onto flat ground or sturdy surface
Attach sleeve clip to the post at desired shelf height
Align the post with the self corner
Place a 3/4" thick cardboard piece onto the post
(this will help to prevent scratches)
Tap the post into place with a rubber mallet
Repeat for remaining posts
2
Attach sleeve clips to the posts at desired shelf height
Align the second shelf with the posts
Use rubber mallet to tap down the shelf to desired height
3A
Attach sleeve clips to the posts at desired shelf height
Align the third shelf with the posts
Use rubber mallet to tap down the shelf to desired height
3B
Attach sleeve clips to the posts at desired handle height
Align the handles the posts
Use rubber mallet to tap down the handles to desired height
Attach sleeve clips to the posts at desired shelf height
Align the third shelf with the posts
Use rubber mallet to tap down the shelf to desired height
ORInstallation A Installation B
CAUTION:
DO NOT use a metal hammer
or the legs may bend
Mobile Wire Shelving Cart
4A
Flip the cart upside down
Attach the casters into the holes of the posts with the rubber mallet
4B
Flip the cart upside down
Attach the casters into the holes of the posts with the rubber mallet
5A
Flip cart right side up
Attach sleeve clips to the posts at desired handle height
Align the handles the posts
Use rubber mallet to tap down the handles
5B
Flip cart right side up
ORInstallation A (cont.) Installation B (cont.)
/