Elima-Draft ELMDFT104FL4031 Operating instructions

Type
Operating instructions
Elima-Draft
ELMDFT1042FL4031
Residential And Commercial HVAC Insulated Floor & Debris
Insert For 10 in. x 4 in. x 2 in. Ducts.
INSTALLIATION GUIDE
*Remove Floor Register Form DUCT Opening
* Insert ELMDFT1042FL4031 into DUCT opening and push down. Make
Sure Insert is Flush With Top Of DUCT. Insert Will Conform With
DUCT Opening Insuring Tight Fit
*Replace Floor Register On DUCT Opening
*******************IMPORTANT********************
REMOVE THE ELMDFT1042FL4031 BEFORE ACTIVIATING THE
HVAC SYSTEM
  • Page 1 1

Elima-Draft ELMDFT104FL4031 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI