BENDIX PNU-182 User manual

Type
User manual

BENDIX PNU-182 is an air dryer designed to remove moisture and contaminants from compressed air systems. It features a compact and lightweight design, making it suitable for various applications, including commercial vehicles, industrial machinery, and medical equipment. The PNU-182 utilizes a two-stage filtration process, with a coalescing filter to remove oil and water droplets and a desiccant filter to remove water vapor. It has an automatic drain valve to discharge collected moisture and contaminants, ensuring optimal performance and preventing system damage.

BENDIX PNU-182 is an air dryer designed to remove moisture and contaminants from compressed air systems. It features a compact and lightweight design, making it suitable for various applications, including commercial vehicles, industrial machinery, and medical equipment. The PNU-182 utilizes a two-stage filtration process, with a coalescing filter to remove oil and water droplets and a desiccant filter to remove water vapor. It has an automatic drain valve to discharge collected moisture and contaminants, ensuring optimal performance and preventing system damage.

(across mounting
surfaces)
Part Number Update
Bulletin No: PNU-182-000 Effective Date: December 17, 2013 Cancels: N/A Page: 1 of 2
Subject: Bendix
®
AD-9si
Air Dryers and Service Replacement Parts and Kits
© 2013 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • All Rights Reserved.
The following Bendix
®
AD-9si
air dryers and service parts are now available from Bendix Commercial Vehicle
Systems LLC.
OE Part
Number
Service New
Part Number
Cartridge
Type Silencer Governor Heater
K066678 K092871PG PG
105-130
12V
K091832 K092871 Standard
K091833 K092871PG PG
II41063F
K091834 K092871 Standard
K091894 K092873PG PG
K091895 K092873 Standard
Bendix
®
AD-9si
Air Dryer
9.26"
Bendix
®
PuraGuard
®
Medallion -
Indicates Use of a PuraGuard (PG)
Oil Coalescing Cartridge
1/4"
Control Port
Mounting
Holes
(3 per side)
1/2"
Supply Port
Pressure
Relief Valve
Exhaust
Port
1/4"
Extended
Purge Port
Integral
Governor
Heater &
Thermostat
Connector
15.22"
Bottom View
Exhaust
Port
WARNING
Do not attempt to remove the clamp
band that retains the two housings
together. Doing so could result in
serious injury or death.
1" Minimum Clearance
Required to Remove
Cartridge
Continued...
Delivery
Port
Bulletin No: PNU-182-000 Effective Date: December 17, 2013 Cancels: NA Page: 2 of 2
Subject: Bendix
®
AD-9si
Air Dryers and Service Replacement Parts and Kits
Service / Kit
Part Number Description
K092011 Delivery Check Valve Kit
5008414PG Bendix
®
PuraGuard
®
Oil Coalescing Cartridge Kit
5008414 Desiccant Cartridge Kit
5012561 Extended Purge Kit with 3/8" U-Bolt; 90 in
3
Reservoir
5005309 Extended Purge Kit with 1/2" U-Bolt; 90 in
3
Reservoir
5008972 Extended Purge Kit with 3/8" U-Bolt; 288 in
3
Reservoir
K092010 Governor Kit (105–130 psi)
109578 Heater & Thermostat Kit
K022105 Purge Valve Kit
800155 Safety Valve
5012217 Silencer Kit
113209 Universal Mounting Plate
109871N Wire Harness & Splice Kit
BENDIX
®
AD-9si
®
AIR DRYER MAINTENANCE KITS AND SERVICE PART NUMBERS
  • Page 1 1
  • Page 2 2

BENDIX PNU-182 User manual

Type
User manual

BENDIX PNU-182 is an air dryer designed to remove moisture and contaminants from compressed air systems. It features a compact and lightweight design, making it suitable for various applications, including commercial vehicles, industrial machinery, and medical equipment. The PNU-182 utilizes a two-stage filtration process, with a coalescing filter to remove oil and water droplets and a desiccant filter to remove water vapor. It has an automatic drain valve to discharge collected moisture and contaminants, ensuring optimal performance and preventing system damage.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI