Greenlee Caster Installatio - Job Box User manual
- Type
- User manual
INSTRUCTION SHEET
99940418 © 2016 Greenlee Textron Inc. IM 1543 REV 1 8/16
Caster Installation
for Models 3548, 5860, and MTS-100
50084267 fastener kit includes the following:
• 3/8-16 x 1 carriage bolt
• 3/8-16 hex nut
• 3/8 split lock washer
To install casters:
1. Position carriage bolts through square holes in
bottom of box.
2. Mount casters from underside.
3. Put washers over bolts.
4. Thread nuts onto bolts.
5. Tighten nuts to approximately 20 foot-pounds.
-
1
Greenlee Caster Installatio - Job Box User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI