Harbor Freight Tools 66344 User manual

INSTRUCTIONS AND PRECAUTIONS

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

23” Handle With 1/2” Square Drive 18 mm 3/8” Drive Socket

9” Extension With 3/8” Square Drive 13 mm 3/8” Drive Wrench

15 mm 3/8” Drive Socket 14 mm 3/8” Drive Wrench

16 mm 3/8” Drive Socket 15 mm 3/8” Drive Wrench

SERPENTINE BELT

TOOL KIT

IMPORTANT SAFETY INFORMATION

ITEM 66344

1. Wear ANSI-approved safety goggles and heavy-duty

work gloves during use.

2. Turn off vehicle engine and allow engine to cool before

use.

3. Inspect before every use; do not use if parts are loose or

damaged.

4. Use as intended only. Do not use as hammer, chisel, or

pry bar. Do not use extension (other than one included)

to increase torque or use on impact tool.

5. Inspect before every use; do not use if parts are loose or

damaged.

6. Keep away from children.

CONTENTS

INSTRUCTIONS

Attach extension to handle at desired angle and attach de-

sired socket to extension. Please note: The handle must be

used with the extension for proper use.

This manual is also suitable for

Download PDF