Hobart 1HF50D Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Hobart 1HF50D Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
F-8352 – 1HF50D Electric Fryer Page 1 of 2
1HF50D
ELECTRIC FRYER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
1HF50D ELECTRIC FRYER
STANDARD FEATURES
Stainless steel cabinet
6" adjustable nickel plated, noncorrosive legs
16 gauge stainless steel fry tank, 50 lb. capacity.
Ten year limited fry tank warranty
1" full port ball type drain valve
17 KW low watt density ribbon style heating
elements
Fat melt cycle
High limit control
Cleaning brush and clean-out rod
ACCESSORIES
Stainless steel tank cover
Grease protector strips
Single large basket - 13"w x 13
1
4"d x 5
1
2"h
Set of twin baskets - 6
1
8"w x 13
1
4"d x 5
1
2"h
Set of tri baskets - 4
1
4"w x 13
1
4"d x 5
1
2"h
Set of 4 casters (2 locking)
Flanged feet
MODEL
1HFD50: Solid state temperature control adjusts
from 200° to 390°F within +/-2 degrees. Multiple
fat modes, fast recovery, boil out mode, and two
countdown timers.
Specications, Details and Dimensions on Reverse Side.
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 2 of 2 F-8352 – 1HF50D Electric Fryer
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
1HF50D
ELECTRIC FRYER
F-8352 (REV. 05/08) LITHO IN U.S.A. (H-01)
CONSTRUCTION: Stainless steel front and sides. Mounts
on 6" adjustable nickel plated, noncorrosive legs. 16 gauge
stainless steel fry tank. 1" full port ball type drain valve.
CLEARANCES: All models require a 6" clearance at both
sides and rear adjacent to combustible construction.
CAPACITY: Fry tank holds 50 lbs. of fry compound and
features twin fry baskets with plastic coated handles.
ELECTRICAL: 208/60/3, 480/60/3. 17 KW low watt
density ribbon style heating elements.
SHIPPING WEIGHT: 200 lbs.
DETAILS AND DIMENSIONS
Side View
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS
MODEL NO.
TOTAL KW
CONN.
3 PH LOADING
KW PER PHASE
NOMINAL AMPS PER LINE WIRE
3 PHASE
208 & 480V 208 VOLT 480 VOLT
X-Y X-Z X Y Z X Y Z
1HF50D 17 5.6 5.6 47 47 47 20 20 20
Top View
1HF50D
Front View
/