Highwood AD-ST7LH1CO4AA-FBE Operating instructions

Type
Operating instructions

This manual is also suitable for

For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 1
IMPORTANT!
DO NOT fully tighten the nuts until all
nuts are started. Once all nuts are started,
go back & tighten all the nuts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
INCLUDED TOOLS
5/32" HEX KEY
Lehigh, Weatherly, or Adirondack Collection
Rectangular, Square, or Sideboard Tables
Assembly Guide
All AD-DTB/AD-CTB
08.07.2017
A
x8
1/4"-20 x 3" Bolt
This assembly guide applies to all tables displayed above!
- AD-DTB37/AD-CTB37 - Rectangular 36x72 Dining or Counter Height Dining Table
- AD-DTB47/AD-CTB47 - Rectangular 42x72 Dining or Counter Height Dining Table
- AD-DTB48/AD-CTB48 - Rectangular 42x84 Dining or Counter Height Dining Table
- AD-DTB25/AD-CTB25 - 22x54 Sideboard
or Counter Height Sideboard Table
- AD-DTB44/AD-CTB44 - 42x42 Square
Dining or Counter Height Dining Table
B
x1
2" Umbrella Grommet
A
C
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Lehigh, Weatherly, or Adirondack Collection
Rectangular, Square, or Sideboard Tables
Assembly Guide
All AD-DTB/AD-CTB
08.07.2017
A
1) Place the table top upside down on a soft surface.
2) Attach leg with 2 A bolts.
3) Repeat for each leg.
4) Securely tighten all bolts, but do not over tighten.
5) If installing an umbrella, insert
Umbrella Grommet B into center hole.
B
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 1
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Lehigh Collection
Dining Chair
Assembly Guide
1) Attach the left & right leg assemblies
to the back assembly with (4) "A" bolts.
DO NOT FULLY TIGHTEN.
CHDL1
03.13.18
A
2) Attach the seat assembly to the legs
with (4) "B" bolts. The Highwood badge
should be visible from the back.
3) Tighten all bolts with supplied hex key.
x4
Left Side Assy
Back Assy
Right Side Assy
INSERTS TO
INSIDE
A x4
B x4
Seat Assy
B
x4
#1/4-20 x 2"
#1/4-20 x 1-1/2"
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Lehigh Collection
Dining Chair with Arms
Assembly Guide
1) Attach the left & right legs
to the back with (4) "C" bolts.
CHDL2
03.13.18
A
2) Attach the seat to the legs with
(4) "B" bolts. The Highwood badge
should be visible from the back.
x4
B
x4
C
x6
#1/4-20 x 2-1/2"
#1/4-20 x 1-1/2"
#1/4-20 x 2"
Left Leg Assy
Right Leg Assy
C x4
Back Assy
Seat Assy
B x4
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Lehigh Collection
Dining Chair with Arms
Assembly Guide
CHDL2
03.13.18
Left Arm Assy
Right Arm Assy
C
A
C
A
3) Attach the left arm support to the
seat with (2) "A" bolts.
4) Attach the left arm to the left rear
leg with (1) "C" bolt.
5) Repeat these steps to attach
the right side arm assembly.
6) Tighten all bolts.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Highwood AD-ST7LH1CO4AA-FBE Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI