FlowerHouse FHBFB06, FHBFB06A, FHBFB06W Operating instructions

Hello! I am an AI chatbot trained to assist you with the FlowerHouse FHBFB06 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

BUTTERFLY BENCH INSTRUCTION

Preferred tools required are a 1/2" closed end wrench and 1/2" ratchet for body

wings and Seat, and 9/32" closed end wrench and 9/32" ratchet for antenna

assembly.

Step 1: Start by bolting wings to butterfly body (do not fully tighten until all

fasteners are in place on entire bench).

Step 2: Place seat in position and start fasteners (do not fully tighten until all

fasteners are in place on entire bench).

Step 3: Place antenna in position and start fasteners.

Step 4: Snug nuts and bolts gradually by moving from fastener location on body,

wings, seat and antenna with ratchet and closed end wrench.

Step 5: Once the fasteners are consistently tightened then your Butterfly Bench is

ready to be used as a bench.

BUTTERFLY BENCH INSTRUCTION

Preferred tools required are a 1/2" closed end wrench and 1/2" ratchet for body

wings and Seat, and 9/32" closed end wrench and 9/32 " ratchet for antenna

assembly.

Step 1: Start by bolting wings to butterfly body (do not fully tighten until all

fasteners are in place on entire bench).

Step 2: Place seat in position and start fasteners (do not fully tighten until all

fasteners are in place on entire bench).

Step 3: Place antenna in position and start fasteners.

Step 4: Snug nuts and bolts gradually by moving from fastener location on body,

wings, seat and antenna with ratchet and closed end wrench.

Step 5: Once the fasteners are consistently tightened then your Butterfly Bench is

ready to be used as a bench.