Lavish Home HW1000024 Installation guide

ASSEMBLY & USE INSTRUCTION:

1.Pull out the lamp body from the package

2.Put part B into part A ; insert knob into the base and tighten it

3.Hook two springs to lamp part C.

4.Hook other two springs to lamp part D.

5.Thread the light bulb (LED bulb included) into the socket securely. Plug the cord.

6.Turn the light on using the ON/OFF switch located on the cord.

This uplight style lamp uses a maximum of 40W incandescent (CFL 8W or LED 5W equivalent)

Please note: 2 Extra springs were included in this package for part D

BULB

PART D

PART C

PART B

PART A

on/off switch knob

REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG

DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG .IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED

ELECTRICIAN .NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED .DO NOT ALTER THE PLUG.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION : THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A SAFETY FEATURE TO