Palram 703726 User manual

Type
User manual

This manual is also suitable for

Footprint Products Limited
Corporate Headquarters
1700 Courtneypark Dr. East, Unit 2
Mississauga, ON L5T 1W1
Canada
Phone / Téléphone : 905-564-6007
Fax / Télécopieur : 905-564-0059
E-mail: Support@footprintproducts.com
In the case of missing or damaged parts, do not return product to store . Please contact:
En cas de pièces manquantes ou endommagées, ne pas retourner le produit au magasin. Veuillez communiquer avec :
En caso de que falten piezas o alguna esté dañada, no devuelva el producto a la tienda. Por favor, contacte con:
For All Customer Services Please Call:
Pour le service à la clientèle, veuillez composer le :
1-800-866-5749
18.05_86543
After Sales Service
Toll Free: (877) 627-8476
M-F 8-4:30 Central Time
For Sales And Other Questions
E-mail: customer.ser[email protected]
USA
* Technical Questions
* Missing Parts
* Assembly Questions
Or Scan
CANADA
www.palramapplications.com
rBeIIaTM
8'x8'
Approx. Dim.
244L x 244W x 219H cm / 96.1L"x 96.1W"x 86.2H"
Bella'
8'x4' Extension
Module
Approx. Dim.
119L x 244W x 219H cm / 46.8"L x 96.1"W x 86.2"H
Snow Load
1 00kg/.2
20lbsge
IWind Resistance %a Light Transmission
1 00km/hr
60m1/hr
=1
80%
8'rx1
2'
(8'x8'+ Extension)
r ,
Extension Kit i
1. a
IMPORTANT
Please read these instructions
carefully before you start to assemble this greenhouse.
Keep these instructions in a safe
place for future reference.
» Customer Service
For assistance with assembly or for
replacement parts - please log onto our website
or call our service line (number is on
the title page).
Additional information can be found
at our website: www.palramapplications.com
» Safety Advice
It is of utmost importance to
assemble all of the parts according to the directions.
Do not skip any step.
We strongly recommend using
work gloves during panels' sliding.
Always wear shoes and safety
goggles when working with extruded aluminium.
If using a step ladder or power tools
make sure that you follow the manufacturer's
safety advice.
Do not touch overhead power
cables with the aluminium profiles.
Do not attempt to assemble the
greenhouse in windy or wet conditions.
Dispose of all plastic bags. Keep
them out of reach of small children.
Keep children away from the
assembly area.
Do not lean against or push the
greenhouse during construction.
Do not position your greenhouse in
an area exposed to excessive winds.
Do not attempt to assemble this
greenhouse if you are tired, have taken drugs or
alcohol or if you are prone to dizzy
spells.
Hot items such as recently used
grills, blowtorches etc. must not be stored in the
greenhouse. Make sure there are no
hidden pipes or cables in the ground before
inserting the pegs.
This product is designed to be used
mainly as a greenhouse.
Note: You should anchor the
greenhouse directly to a solid foundation; Make sure
that there are no obstructions
between the assembly area and the final position.
» Care & Maintenance
When your greenhouse needs to be
cleaned, use a mild detergent solution and rinse
with cold clean water.
DO NOT use acetone, abrasive
cleaners or other special detergents to clean the clear panels.
» Tools & Equipment
Work gloves
Phillips head screwdriver
Adjustable Spanner /Wrench
Leveler
Tape measure
Step ladder
Scissors
Electric screwdriver ( lOmm,
7mm, Phillips)
Lubricant (Optional)
T001 - Special tool for Screws
411 and nuts 412
Before Assembly
v Selecting a site:
- The greenhouse must be positioned and fixed on a flat
level surface.
- Choose a sunny position away from overhanging trees.
V We strongly recommend this greenhouse to be secured
directly to a solid concrete
foundation.
V This is a multi-part assembly best achieved by two people.
Allow at least
half a day for the assembly process.
V Take all components & parts out of the packages. Sort the
parts and check against the
content parts list.
Parts should be laid out close at hand. Keep all small parts
(screws etc.) in a bowl so they
do not get lost.
I Please note multi-sided profiles are used in this greenhouse.
As a result some holes in
the profiles are not used during assembly.
Please review entire instructions before starting. Carry out
the assembly steps in exact
order.
IR The drawings in this manual are designed for 8'x
8'greenhouse + 4'Extension Kit.
Please note that content list refers only for 8x8 greenhouse.
Note: all the extension module steps are marked with a
dashed outline, should be
performed during the greenhouse assembly process.
8'x8' 4' Ext. 8'x12'
Model Base Length No. of Packages
Bella (8' x 8') 244 cm / 96.1" 1
Bella + 4' Ext. (8'x 12') 363 cm / 142.9" 2
Bella + 4' Ext. x 2 (8' x 16') 482 cm / 189.8" 3
Bella + 4' Ext. x 3 (8' x 20') 601 cm / 236.6" 4
» During Assembly
Make sure the base is square by measuring the diagonals and level by using a spirit level.
Peel the film covering the panel. Make sure you install it with the UV protected side out.
You may use Silicon lubricant spray in order to help you slide the panels into the profiles.
Do not spray the Polycarbonate panels.
Use a rubber mallet if necessary.
All panels with the stamped words THIS SIDE OUT must be facing out to
create full UV protection. Remove plastic sticker as panels are locked in place.
Lil
During assembly you will encounter the information icon, please refer to the
relevant assembly step for additional comments and assistance.
This icon indicates
that the installer should
be inside the product.
This icon indicates that
11 the installer should be
outside the product.
Step 3: Refers only for the extension kit! The extension kit contains a base connector, either part
#8447 or #7601
Step 7: Roof window can be located only on one of the two central roof panels.
If you assemble the greenhouse with an extension module, the roof windows must be placed on
panels only as specified in the manual.
* Note: The selected placing will affect the next assembly steps.
Step 8: Please make sure you place profile and screws according to the window location (Step 7)
Step 41: In case the window is not closed properly, please go to Step 40b, release the screws,
adjust the profile and tighten the screw.
Step 44: Peel the film covering the panel. Make sure you install it with the UV protected side out.
Step 53: Choose the appropriate anchoring according to the existing base. Screws and masonry
anchors are not supplied.
/!\ Important Recommendations
Firmly connect the greenhouse to a level surface immediately after completion
of the assembly.
Anchoring this product to the ground is essential to its stability and rigidity.
It is required to complete this stage in order for your warranty to be valid.
Tighten all screws once assembly is completed.
Screws 411 and nuts 466 are used throughout the assembly process.
Screws 411 are to be assembled from the outside and nuts 466 from the inside of the greenhouse.
If not specified otherwise, do not fasten screws and nuts (411 & 466) for more than 2-3 turns.
Do not tighten them until completion of the panels'assembly.
These 2 icons indicate if screw's tightening is required or not.
However, in some steps, temporary tightening of a few screws may be needed to prevent a
profile from sliding out.
Contents
Item Qty.
8405
8414
8406
8407
8452
8451
8433
8400
8401
8437
6
4
1
1
5
2
3
1
1
1
Item Qty. Item Qty.
8403
8402
8404
8399
989
992
991
8421
8363
7599
8420
586
8417
8416
8415
8418
8419
8434
3
/r-
8447
i
For Extension Kit Only
2
7599
2
7597
Extension Kit
8'x1
2'
(8'x8'+ Extension)
=
7599
7599
7597
7597
7597
. .
t
I 1
8'x1 6'
(8'x8'+ 2 Extensions)
2
2
7442 fp 16
i
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
_a
11
/r-
For Extension Kit
Only
8430
I
1
7039 1
I
Extension Kit
8'x1 2'
(8'x8'+
Extension)
411
466
8
8
12
/r-
r
I
I
I
I
I Extension
Kit
For Extension Kit Only
8405
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
2 411 8
../
LExtension Kit
13
For Extension Kit
Only
8405
r9
2
I._
411 4
,
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
a
16
For Extension Kit Only
8452
8453
r9
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
1.
Extension Kit I-
e
2
I
2
8452
8455
8'x1
2'
(8'x8'+ Extension)
I
,
o S.
i
2
8453
4045
I
)
Cr
4045
6 cm
---......._ _...4.....,,
"cfr-2 cm
0.8"
'Q
2.36
4045
I
8455
8
- 9
7
1
x2_I
1
I
1
I
I
1
I
1
I
I
1
I
I
I
I
I
I
I
I
I
I
I
I
J
0-
: 2
cmi
1 0.8 "'
6 cm
I 1 2.36" 1
fir.-.1,1
1*11
Op 0,0
el
4045
4045
../
20
r
8433 2
8415
8416
1 411
1
466
2
2
This side out
411
1 1
23
8420
318
This side out
This side out
This side out
318
318
318
../
25
r
8415
8416
8402 2
This side out
28
.
8420
318
This side out
-
-ml
29
For Extension Kit Only
8452
8453
r9
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
1.
Extension Kit I-
e
2
I
2
8452
0,
8455
8'x1
2'
(8'x8'+ Extension)
I
/
2
8453
4045
cr6 cm ,4.....hs ,
4045
"ir)2 cm 'Q
2.36
0.8"
4045
8455
1
8
- 9
7
1
x2_I
1
I
1
I
I
1
I
1
I
I
1
I
I
I
I
I
I
I
I
I
I
I
I
J
36
For Extension Kit Only
8429
Extension Kit
7931 1
411
466
8406
AO
411
37
L.
1
411
466
5
5
[Extension
Kith
I
../
42
464
--------..........._
8 465 16 422 16
14111--
465
464
.0
422
A.
liii
ir
465 or',
1111111 illi
464
422
0
b422
ir-,'
st,
.111
464_,
ION
422 0% s % a
465
...
% a
...
I
46 Li ' '.°
`40 465
41
I
r
44
8417 4
8400
8401
1
411
1 318
4
4
This side out
(i!)
-
318
318
O
8400/8401
411
This side out
8417
I I I
8417
11111111 1111110
Palram's 5 years Limited Warranty
Product Details: Greenhouses
Palram Applications (1995) Ltd (Company number: 512106824) whose registered office is atTeradion Industrial Park, M.P Misgav 20174,
Israel ("Palram") warrants that the product will be free from defects in material or workmanship for a period of 5 years from the original
date of purchase subject to the definitions, terms and conditions contained in this warranty.
1.
1.1
Conditions
This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Palram's written
recommendations.
1.2 Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly
or maintenance, accidents, impact from foreign objects, vandalism, pollutants, alteration, painting, connecting, gluing, sealing not in
accordance with the user's manual, or damage resulting from cleaning with incompatible detergents and minor deviations of the product
are not covered by this warranty.
1.3 This warranty does not apply to damage resulting from "force majeure') which includes but is not limited to, hail, storm, tornado,
hurricane, blizzard, flood, fire effects.
1.4 This warranty is void if structural parts and components used are not compatible with Palram's written recommendations.
1.5 This Warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product
(including, but not limited to, any person who acquires the product from the original purchaser).
2. Claims and Notifications
2.1 Every warranty claim must be notified in writing to Palram within 30 days after the discovery of the defective product, enclosing the
original sales receipt and this warranty.
2.2 The claimant must allow Palram to inspect the product involved and the installation site itself while the product is still in its original
position and has not been removed or moved or altered in any way and/or return the product to Palram for testing.
2.3 Palram reserves the right to investigate independently the cause of any failure.
3. Compensation
3.1 If a claim under this Warranty is properly notified and approved by Palram, the purchaser, at Palram's option, may either (a) purchase a
replacement product or part/s; or (b) receive refund of the original product or part/s purchase price, all in accordance with the following
schedule:
Period After Purchasing Replacement Product or Part/s Refund
From date of purchase up to end of 1" year Free of charge 100%
End of 1"Year up to end of 2nd year purchaser will pay 20% of the original purchase price 80%
End of 2nd year up to end of 3rd year purchaser will pay 40% of the original purchase price 60%
End of3rd year up to end of 4th year
purchaser will pay 60% of the original purchase price 40%
End of 4th year up to end of 5th year purchaser will pay 80% of the original purchase price 20%
3.2 For avoidance of any doubt, calculation for determination regarding compensation for defective part/s, according to the schedule
above, will be based on the contribution of the defective part to the original cost of the product. Palram reserves the right to provide
substitutions if the product or any part of it is unavailable or obsolete.
3.3 This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other
direct or indirect loss(es) which may result from the product failure.
4. General Conditions and Limitations
4.1 OTHER THAN HAS BEEN SPECIFICALLY STATED INTHIS WARRANTY, ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE ARE EXCLUDED SO FAR AS THE LAW PERMITS.
4.2 EXCEPT WHERE WE HAVE SPECIFICALLY STATED INTHIS WARRANTY, PALRAM SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE
PURCHASER SUFFERS DIRECTLY, INDIRECTLY, OR AS A CONSEQUENCE OF USING, OR IN ANY OTHERWAYCONNECTEDTOTHE PRODUCT.
4.3 IF PALRAM IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH IMPLIED WARRANTIES IS EXPRESSLY LIMITED
TOTHE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.
4A THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHETHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USE OF
THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION OR IN ANY GIVEN CIRCUMSTANCE. PALRAM
IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TOTHE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM
THE IMPROPER HANDLING, STORAGE, INSTALLATION, ASSEMBLY OR USE OF THE PRODUCT OR THE FAILURETO FOLLOWTHE WRITTEN
INSTRUCTIONS REGARDING THE HANDLING, STORAGE, INSTALLATION, ASSEMBLY AND USE OF THE PRODUCT.
4.5 UNLESS OTHERWISE EXPRESSLY INDICATED BY PALRAM, THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE
ONLY. PALRAM IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING FROM ANY USE OF THE PRODUCT FOR ANY
PURPOSETHAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION
OR OTHER CODES IN EFFECT INTHE LOCATION WHERE THE PURCHASER WILL USE THE PRODUCT.
5 Jahre beschrankte Garantie von Palram
Angaben zum Produkt: Gewachshauser
Palram Applications (1995) Ltd (Firmennummer:512106824) mit Sitz in Teradion Industrial Park, M.P Misgav 20174, Israel ( Palram ") garantiert,
dass das Produkt fur einen Zeitraum von 5 Jahren ab dem Kaufdatum frei von Mangeln in Material und Verarbeitung wird, und den Definitionen,
Begriffen und Bedingungen die in dieser Garantie enthalten sind unterliegt.
co
1. Bedingungen
1.1 Diese Garantie ist nur gOltig, wenn das Produkt in
Ubereinstimmung
mit den schriftlichen Empfehlungen von Palram installiert, gereinigt,
behandelt und gepflegt ist.
1.2 Ohne Abweichung von oben genannten, Schaden, die durch Anwendung von Gewalt, unsachgema@e Behandlung, unsachgemaReVerwendung,
nachlassige Nutzung, Montage oder Wartung, Unfalle, Auswirkungen von Fremdkorpern, Vandalismus, Verschmutzung, Veranderung, Malerei,
Verbinden, Kleben und Dichten, nicht in Ubereinstimmung mit der Bedienungsanleitung, verursacht werden, oder Schaden, die bei Reinigung mit
inkompatiblen Reinigungsmitteln entstehen, so wie geringffigige Abweichungen des Produkts, werden durch diese Garantie nicht abgedeckt.
1.3 Diese Garantie gilt nicht fur Schaden, die durch,hohere Gewalt' verursacht werden (beinhaltend aber nicht beschrankt auf: Nagel, Sturm, Tornado,
Hurrikan, Schneesturm, Uberschwemmungen, Feuer Auswirkungen).
1.4 Diese Garantie erlischt, falls Bauteile und Komponente, die nicht mit den schriftlichen Empfehlungen von Palram kompatibel sind, verwendet werden.
1.5 Diese Garantie gilt ausschlieIlich fur den ursprunglichen Kaufer des Produkts. Sie erweitert sich nicht auf keine anderen Kaufer oder Benutzer des
Produkts (einschlieIlich, aber nicht beschrankt auf irgendeine andere Person die das Produkt von den ursprunglichen Kaufer erwirbt).
2. Anspriiche und Mitteilungen
2.1 Jeder Gewahrleistungsanspruch muss Palram innerhalb von 30 Tagen nach Entdeckung des fehlerhaften Produkts schriftlich vorgelegt werden.
Hierzu reichen Sie bitte auch den Original-Kaufbeleg und diese Garantie mit ein.
2.2 Der Antragsteller muss Palram erlauben den betroffenen Produkt und den Aufstellungsort selbstzu OberprOfen, wahrend das Produkt noch in
seiner ursprunglichen Position ist und nicht entfernt oder verschoben oder in irgendeiner Weise verandert wurde, und/oder den Produkt an
Palram zum Testen zu senden.
2.3 Palram behalt sich das Recht vor die Fehlerursachen unabhangig zu untersuchen.
3. Entschficligung
3.1 1st ein Anspruch gemaR dieser Garantie ordnungsgemaR angemeldet und bei Palram genehmigt worden, kann der Kaufer, nach eigenem
Ermessen von Palram, entweder (a) ein Ersatzprodukt oder Teil/e erwerben; oder (b) eine Erstattung des ursprunglichen Produkt oder Teil/e
Kaufpreises erhalten, alles in Ubereinstimmung mit dem folgendem Schema:
Zeitraum nach Erwerbung Ersatzprodukt bzw. Ersatzteil/e Ruckerstattung
Ab Kaufdatum bis zum Ende des 1. Jahr Kostenlos 100%
Ende des 1. Jahr bis zum Ende des 2. Jahr K5ufer zahlt 20% des ursprunglichen Kaufpreises 80%
Ende des 2. Jahr bis zum Ende des 3. Jahr K5ufer zahlt 40% des ursprunglichen Kaufpreises 60%
Ende des 3. Jahr bis zum Ende des 4. Jahr K5ufer zahlt 60% des ursprunglichen Kaufpreises 40%
Ende des 4. Jahr bis zum Ende des 5. Jahr K5ufer zahlt 80% des ursprunglichen Kaufpreises 20%
3.2 Um jegliche Zweifel auszuschlieIen, wird sich die Berechnung fur die Bestimmung Ober Entschadigungen fur defekte Teil/e, entsprechend der
obigen Schema, auf dem Beitrag des defekten Teils an den ursprunglichen Kosten des Produktes beruhen. Palram behalt sich das Recht vor fur ein
Ersatz zu sorgen, falls der Produkt oder ein Teil davon nicht verfugbar oder veraltet ist.
3.3 Diese Garantie erstreckt sich nicht auf Kosten und Ausgaben
fur
Aus- und Einbau des Produkts oder Steuern oderVersandkosten oder sonstige
direkte oder indirekte Verlust/e die sich von einem Produktfehler ergeben konnen.
4. Allgemeine Bedingungen und Einschrfinkungen
4.1 ANDERS ALS BESONDERS IN DIESER GARANTIE ANGEGEBEN, ALLE ANDEREN GARANTIEN, OB AUSDRUCKLICH ODER IMPLIZIT, EINSCHLIESSLICH
ALLER EINGESCHLOSSENEN GARANTIELEISTUNGEN DER MARKTGANGIGKEIT ODER EIGNUNG FOR EINEN BESTIMMTEN ZWECK SIND SO WEIT DIES
RECHTLICH MOGLICH 1ST AUSGESCHLOSSEN.
4.2 AUSSER ALS AUSDRUCKLICH IN DIESER GARANTIE ANGEGEBEN, HAFTET PALRAM NICHT FUR IRGENDWELCHE VERLUSTE ODER SCHADEN DIE DER KAUFER,
DIREKT ODER INDIREKT ODER ALS FOLGE DER NUTZUNG ODER IN IRGENDWELCHEN ANDEREN MIT DEM PRODUKTVERBUNDENEN WEISE LEIDET.
4.3 FALLS PALRAM EIN AUSSCHLUSS DER STILLSCHWEIGENDEN GARANTIEN DER MARKTGANGIGKEIT ODER EIGNUNG FUR EINEN BESTIMMTEN ZWECK
IN BEZUG AUF DAS PRODUKT NACH GELTENDEM RECHT NICHT GESTATTET IST, WIRD DIE DAUER ALLER SOLCHEN GARANTIEN AUSDRUCKLICH AUF
DIE DAUER DIESER GARANTIE BESCHRANKT, ODER FALLS LANGER, AUF DIE GESETZLICH VORGESCHRIEBENE HOCHSTDAUER.
4.4 DER KAUFER IST ALLEIN DAFORVERANTWORTLICH FESTZUSTELLEN, OB DIE HANDHABUNG, LAGERUNG, MONTAGE, INSTALLATION ODER
VERWENDUNG DES PRODUKTS AN BELIEBIGEN STANDORT UND FUR JEDE GEGEBENE ANWENDUNG ODER SITUATION, SICHER UND ANGEMESSEN
1ST. PALRAM 1ST NICHT VERANTWORTLICH FUR SCHADEN ODERVERLETZUNGEN DES KAUFERS, ANDERER PERSONEN ODER DES EIGENTUMS,
DIE IN FOLGE EINER UNSACHGEMASSEN HANDHABUNG, LAGERUNG, EINBAU, MONTAGE ODER NUTZUNG DES PRODUKTS ODER DURCH
NICHTBEACHTUNG DER ANWEISUNGEN ZUR HANDHABUNG, LAGERUNG, EINBAU, MONTAGE UND NUTZUNG DES PRODUKTES ENTSTANDEN SIND.
4.5 DIE WARE 1ST BESTIMMT AUSSCHLIESSLICH ZUR NORMALEN PERSONLICHEN UND KOMMERZIELLEN NUTZUNG, SOFERN NICHT AUSDRUCKLICH
ETWAS ANDERES DURCH PALRAMVEREINBARTWURDE. PALRAM HAFTET NICHT FOR VERLUSTE, SCHADEN, KOSTEN ODER AUSGABEN, DIE AUS
EINER NICHT VON DEN ANWEISUNGEN EMPFOHLENEN VERWENDUNG DES PRODUKTS ZU IRGENDEINEM ZWECK ENTSTEHEN ODER DIE VON
KEINEM GELTENDEN RECHTSVORSCHRIFTEN ODER ANDEREN CODES ERLAUBT SIND DIE AN DEM ORT WO DER KAUFER DEN PRODUKT BENUZEN
WIRD IN KRAFT SIND.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88

Palram 703726 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI