idh by St. Simons 13045-15A Installation guide

idh

by St. Simons, Inc.

Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories

Demand Quality, Demand idh

idhbrass.com

Installation Instructions

Professional Grade Quality Solid Brass

1” Diameter Wall Door Bumper

Item# 13045

Dimensions:

• Projection: 5/8”

• Diameter: 1”

• Net Weight: .75 oz.

• Gross Weight: 1 oz.

• Solid Brass Wood Screw

• Extra Black Rubber Bumper Included

Dimensions are for reference use only.

For exact dimensions, please measure actual part.

Installation Instructions:

1. Twist and remove the mounting base from the item

2. Place the mounting base where the door knob

would come in contact with the wall

3. Mark and drill pilot hole

4. Screw the mounting base into the wall and hammer

in the nail to prevent the base from turning

5. Twist the rest of the item onto the mounting base

Catalog Section: D

1” Diameter Wall Door Bumper

Item# 13045

Date: Rev 01/18

This manual is also suitable for

Download PDF