Moen 3638EP Specification

Type
Specification

This manual is also suitable for

EP Sux
Models Only
Specifications
DESCRIPTION
Available in various nishes identied by sux
Fixed mount showerhead only
Nonmetallic spray face and shell
Brass swivel ball assembly
OPERATION
4 function massage, ne, full and combined (massage and full):
rotate outer ring to select
FLOW
Designed to deliver 2.5 gpm (9.5 L/min) at 60 psi
EP sux models are limited to 2.0 gpm (7.6 L/min) max for products
manufactured prior to June 30, 2018. EP sux models manufactured
after June 30, 2018 are limited to 1.75 gpm (6.7 L/min) max.
STANDARDS
Third party certied to meet ASME A112.18.1/ CSA B125.1 and all
applicable requirements referenced therein
EP sux models are third party certied to WaterSense®
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
4-Function Showerhead
Models: 3638 series
3638EP series
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 12/17
4-3/8”
(111mm)
2-9/16”
(65mm)
  • Page 1 1

Moen 3638EP Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI