Furinno FNBL-22090 Installation guide

Furinno
Brand
Furinno
Model
FNBL-22090
Type
Installation guide
Assembly Instruction
WARNING:
>This unit has been designed to support the
maximum loads shown. Exceeding these
load limits could cause sagging, instability,
product collapse, and/or serious injury.
>DO NOT allow children to climb on unit.
>Put heavier items on lower shelves.
its Space. its Budget
Customer Support
NEED HELP? For help with assembly, or if you are missing a
part, please call Furinno Customer Service, 1-773-299-8111
from Mon-Fri, 9am-5pm (CST) or email: support@furinno.com
www.furinno.com
Approx. 30 minutes
Recomm. 1 Person
No Tools Required
STEP 3
Recommended Maximum Weight
FNBL2209020171106
图1
3 3
B
C
D
H
F
G
A
A
(1)x 2pcs
(4)x 2pcs
(5)x 2pcs
15Lbs
20Lbs
3.1 Attach Upper Support (F,G) and Bottom Support(C,D) with Connector(3).
3.2 Attach Stopper(4) and Wheel(5) on the bottom of Bottom Support(C,D)
and Back Support(H).
** 5 slope angle to be adjust on Support Frame(B),as shown.**
** Table height can be adjust with Connector(3).**
Adjustable Slope
Furinno Boyate Adjustable Rolling
Laptop Desk
MODEL :
FNBL-22090
1
2
3
8/4pcs
2pcs
2pcs
A
1pcs
4
5
6
2pcs
2pcs
1pcs
7
1pcs
STEP 1
B
C
1pcs
1pcs
D
E
F
1pcs
1pcs
1pcs
G
H
1pcs
1pcs
STEP 2
B
F
G
A
(2)x 2pcs
C
D
E
(1)x 8pcs
H
3
3
4
4
5
5
B
C
D
F
G
H
A
E
Attach Bottom Panel(E),Back Support(H) and Bottom Support(C/D) with Long Hexagon
Screw(1).
No Hardware List Qty No QtyParts List
USEFUL HINTS BEFORE YOU START:
1. Read each step carefully before starting.
2. It is important that each step is performed in correct order to avoid difficulties.
3. Identify, sort and count the parts before assembly.
4. Assemble your furniture on packaging cardboard to prevent scratch or damage.
5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.
6. Using uncompatible hardware might cause damage to product.
Connector
Long Hexagon Screw
Short Hexagon Screw
Allen wrench
Stopper
Wheel
Top Panel
Left Bottom Support
Support Frame
Left Upper Support
Right Bottom Support
Bottom Panel
Back Support
Right Upper Support
Open-end wrench
1.1 Attach Left Upper Support(F)and Top Panel(A)with Short Hexagon Screw(2).
Attach Support Frame(B) on left Upper Support(F),as shown.
1.2 Attach Right Upper Support(G)and Top Panel(A)with Short Hexagon Screw(2).
  • Page 1 1
  • Page 2 2

Furinno FNBL-22090 Installation guide

Furinno
Brand
Furinno
Model
FNBL-22090
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents