Livex Lighting 10503-02 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
10503-02
Type
Operating instructions

This manual is also suitable for

Livex Lighting 10503-02 is a versatile and stylish lighting fixture that can enhance the ambiance of any room. With its adjustable shade and multiple mounting options, it can be used as a wall sconce, ceiling light, or pendant light. The fixture is easy to install and comes with all the necessary hardware. It is also compatible with a variety of light bulbs, giving you the flexibility to customize the lighting to your needs. Whether you're looking to add a touch of elegance to your living room or create a cozy ambiance in your bedroom, the Livex Lighting 10503-02 is the perfect choice.

Livex Lighting 10503-02 is a versatile and stylish lighting fixture that can enhance the ambiance of any room. With its adjustable shade and multiple mounting options, it can be used as a wall sconce, ceiling light, or pendant light. The fixture is easy to install and comes with all the necessary hardware. It is also compatible with a variety of light bulbs, giving you the flexibility to customize the lighting to your needs. Whether you're looking to add a touch of elegance to your living room or create a cozy ambiance in your bedroom, the Livex Lighting 10503-02 is the perfect choice.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
10503 10505 10506
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and all
hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area.
Take care not to lose any small parts necessary for installation.
3. Drilling two holes in the wall, distance and the same distance from the
keyhole of mounting plate, then loaded plastic anchors(A). Attach the
mounting plate(B) to the wall, aligning the plastic anchors(A) and junction
box, lock it securely with the two wood screws(D) and the two box
screws(E). The side of the back plate marked “GND” must face out. The
junction box is not included.
4. Guide fixture wires through hole in center of back plate.
5. Follow wiring instructions carefully (see fig.2).
6. Place the lamp body(H) onto the mounting plate so that the studs(C)
protrude through the cover plate holes, then tighten it with the ball nut(I).
7. Raise the glass shade(G) to the lamp holder and using the check ring(F)
by turning it clockwise until tight.
8. Install the light bulbs(Not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE
RATING!
CONNECTING THE WIRES (Fig.2)
1. Connect the electrical wires as follows. Connect the Black wire from the
fixture to the black house (hot) Wire. Connect the white wire from the fixture
to the white (neutral) house wire. Make sure all wire nuts are secured. You
may wrap the connections with electrical tape. If your outlet box has a
ground wires (green or bare copper) connect fixture’s ground wire to it.
Otherwise attach the bare copper fixture wire to the green ground screw on
the mounting plate.
2. Tuck the wire connections neatly into the wall junction box.
Your installation is now complete Return power to the junction box and
test the fixture.
E
F
G
H
I
FIXTURE
WIRES
Black or
Smooth
HOUSE
WIRES
Black(Hot)
FIXTURE
WIRES
White or
Ribbed
FIXTURE
WIRES
Bare
Copper
(Ground)
HOUSE
WIRES
White
(Neutral)
HOUSE
WIRES
Green or Bare
Copper(Ground)
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us on-line at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20151210503
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 10503-02 Operating instructions

Livex Lighting
Brand
Livex Lighting
Model
10503-02
Type
Operating instructions
This manual is also suitable for

Livex Lighting 10503-02 is a versatile and stylish lighting fixture that can enhance the ambiance of any room. With its adjustable shade and multiple mounting options, it can be used as a wall sconce, ceiling light, or pendant light. The fixture is easy to install and comes with all the necessary hardware. It is also compatible with a variety of light bulbs, giving you the flexibility to customize the lighting to your needs. Whether you're looking to add a touch of elegance to your living room or create a cozy ambiance in your bedroom, the Livex Lighting 10503-02 is the perfect choice.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents