Sony EW225 VPL-EX275 User manual

4-435-798-11 (1)

Data

Projector

Operating Instructions

Before operating the unit, please read this manual and supplied Quick Reference Manual

thoroughly and retain it for future reference.

VPL-EW275/EW245/EW225

VPL-EX275/EX271/EX245/EX241/EX225/EX221

Not all models are available in all countries and area. Please check

with your local Sony Authorized Dealer.

2

Table of Contents

Overview

Location and Function of Controls .... 4

Main Unit .....................................4

Connector Panel ...........................5

Remote Commander and Control

Panel Keys ................................. 6

Preparation

Connecting the Projector ................... 9

Connecting a Computer ................9

Connecting a Video

equipment ................................ 10

Connecting a microphone .......... 12

Connecting a USB memory

device ...................................... 12

Connecting a USB wireless LAN

module .................................... 13

Connecting an External Monitor and

Audio Equipment .................... 13

Projecting/Adjusting an

Image

Projecting an Image ......................... 14

Adjusting the Projected image ... 15

Turning Off the Power ................ 18

Adjustments and Settings

Using a Menu

Using a MENU ................................ 19

The Picture Menu .............................20

The Screen Menu .............................21

The Function Menu .......................... 25

The Operation Menu ........................ 26

The Connection/Power Menu ...........27

The Installation Menu ......................29

The Information Menu .....................30

Network

Using Network Features ...................31

Displaying the Control Window of

the Projector with a Web

Browser ...................................31

Confirming the Information

regarding the Projector ............32

Operating the Projector from a

Computer .................................32

Using the e-mail report

Function ...................................33

Presentation Function via

Network

Using Presentation Function via

Network .........................................35

Installing Projector Station for

Network Presentation ..............35

Starting Projector Station for

Network Presentation ..............35

Projecting an Image ....................36

Connection Settings ....................36

Using the Controller ...................37

Projecting an Image using

USB Connection

Projecting an Image using USB

Connection ....................................38

Starting USB Display .................38

Projecting an Image ....................38

3

Table of Contents

Using the Controller ...................38

USB Media Viewer

Using USB Media Viewer ................39

Thumbnail Mode ........................40

Option Menu ...............................40

Display Mode .............................41

Option Menu ...............................41

Slideshow Mode .........................41

Option Menu ...............................42

Others

Indicators ..........................................43

Messages List ...................................44

Troubleshooting ...............................45

Replacing the Lamp .........................47

Cleaning the Air Filter .....................49

Specifications ...................................50

Projection Distance ..........................58

Dimensions .......................................72

Index .................................................78

4

Location and Function of Controls

B Overview

Location and Function of Controls

a Focus ring (page 15)

b Zoom ring (page 15)

c Lens

d Remote control detector

e ON/STANDBY indicator

(page 43)

f LAMP/COVER indicator

(page 43)

g Front feet (adjustable) (page 16)

h Foot adjust button (page 16)

i Air filter cover/Ventilation holes

(intake) (page 49)

j Lamp cover (page 47)

k Ventilation holes (exhaust)

Do not place anything near the ventilation

holes as this may cause internal heat

buildup. Do not place your hand near the

ventilation holes and the circumference as

this may cause injury.

l Speaker (VPL-EW275/EW245/

EW225/EX275/EX245/EX225

only)

m Connector panel (page 5)

n Security bar

Connects to a commercially available

security chain or wire.

o Security lock

Connects to an optional security cable

manufactured by Kensington.

For details, visit Kensington’s web site.

http://www.kensington.com/

p Control panel keys (page 6)

Main Unit

5

4

3

2

1

6

8

7

9

qa

qs

7

8

0

Caution

qh

qf

qd

q

g

5

Location and Function of Controls

Overview

VPL-EW275/EW245/EW225/EX275/EX245/EX225

VPL-EX271/EX241/EX221

Input (pages 9, 10)

a INPUT A

Video: RGB/YPBPR input connector

(RGB/YP

BPR)

Audio: Audio input connector (AUDIO)

b INPUT B

Video: RGB input connector (RGB)

Audio: Audio input connector (AUDIO)

c INPUT C

Video: HDMI input connector (HDMI)

Audio: HDMI input connector (HDMI)

d S VIDEO (S VIDEO IN)

Video: S video input connector (S

VIDEO IN)

Audio: Audio input connector (L

(MONO) AUDIO/R)

e VIDEO (VIDEO IN)

Video: Video input connector (VIDEO)

Audio: Audio input connector (L

(MONO) AUDIO/R)

• The audio inputs of S VIDEO and VIDEO

are shared.

• The audio input connector and audio output

from the HDMI connector are available only

on VPL-EW275/EW245/EW225/EX275/

EX245/EX225.

Output (page 13)

f OUTPUT

Video: Monitor output connector

(MONITOR)

Audio: Audio output connector

(AUDIO)

Connector Panel

54

4

5

7

6

1

29

8q;3

qs

qa

54

7

6

1

29

8q;3qa

Notes

6

Location and Function of Controls

• This connector outputs the projected image

or audio only when INPUT A or INPUT B is

used.

• The audio output connector is available only

on VPL-EW275/EW245/EW225/EX275/

EX245/EX225.

Others

g RS-232C connector (RS-232C)

RS-232C compatible control connector.

Connects the computer’s RS-232C

connector and the RS-232C cross cables.

h LAN connector (page 31)

i AC IN (∼) socket

Connects the supplied AC power cord.

j USB connector (Type A) ( )

(pages 12, 39)

k USB connector (Type B) ( )

(page 38)

l Microphone input ( )

Microphone input is available only on VPL-

EW275/EW245/EW225/EX275/EX245/

EX225.

Remote Commander

Control Panel Keys

a Turning on the power/Going to

standby mode

?/1 (On/Standby) key

b Selecting an input signal

(page 14)

INPUT key

c Operating a menu (page 19)

MENU key

RESET key

ENTER /V/v/B/b (arrow) keys

RETURN key

d Adjusting the image (page 15)

ASPECT key (page 21)

KEYSTONE key (page 17)

PATTERN key

This function is not available.

APA (Auto Pixel Alignment) key

*

(page 17)

*

Use this key when inputting a computer

signal via the RGB input connector

(INPUT A or INPUT B).

Notes

Note

Remote Commander and Control Panel Keys

2

3

4

5

6

1

4

7

INPUT

MENU

APA ECO MODE

RETURN

ASPECT

D ZOOM

KEYSTONE

ENTER

VOLUME

PATTERN

FREEZE

BLANK

MUTING

RESET

3

6

12

Note

7

Location and Function of Controls

Overview

e Using various functions during

projecting

D ZOOM (Digital Zoom) +/– key

*

Enlarges a portion of the image while

projecting.

1 Press the D ZOOM + key to display

the digital zoom icon on the projected

image.

2 Press the V/v/B/b keys to move the

digital zoom icon to the point on the

image you want to enlarge.

3 Press the D ZOOM + key or the D

ZOOM – key repeatedly to change the

enlargement ratio. The image can be

enlarged up to 4 times.

Press the RESET key to restore the

previous image.

BLANK key

Cuts off the projected image

temporarily. Press again to restore the

previous image. Picture muting helps

reduce power consumption.

MUTING key (VPL-EW275/EW245/

EW225/EX275/EX245/EX225 only)

Mutes the audio output temporarily.

Press again to restore the previous

volume.

VOLUME +/– key (VPL-EW275/

EW245/EW225/EX275/EX245/

EX225 only)

Adjusts the volume output.

FREEZE key

This function is not available.

* Use this key when inputting a computer

signal. But it may not be used depending

on the resolution of the input signal.

f Setting the energy–saving mode

easily

ECO MODE key

Energy-saving mode can be set easily.

Energy-saving mode consists of “Lamp

Mode,” “With No Input,” “With Static

Signal” and “Standby Mode.”

1 Press the ECO MODE key to display

the ECO Mode menu.

2 Press the V/v key or ECO MODE key

to select “ECO” or “User” mode.

ECO: Sets each mode to the optimum

energy-saving value.

Lamp Mode: Low

With No Input: Standby

With Static Signal: Lamp

Dimming

Standby Mode: Low

User: Sets each item of the ECO

Mode menu as you desire (go to

step 3).

3 Select “User” then press the b key.

The setting items appear.

4 Press the V/v key to select the item

then press the ENTER key.

5 Press the V/v key to select the setting

value.

6 Press the ENTER key.

The screen returns to the User screen.

For details on ECO Mode settings, see

“Lamp Mode,” “With No Input,” “With

Static Signal” and “Standby Mode” on

the Connection/Power menu (page 27).

Others

g Infrared transmitter

About remote commander operation

• Direct the remote commander toward the

remote control detector.

• The shorter the distance between the

remote commander and the projector is,

the wider the angle within which the

remote commander can control the

projector becomes.

Note

RETURN

ECO

User

ECO Mode

:Sel

:Back

RETURN

Lamp Mode High

Auto Power Saving

Standby Mode

Off

With No Input

Lamp Dimming

With Static Signal

Standard

User

:S el

:S et

:Back

8

Location and Function of Controls

• Make sure that nothing obstructs the

infrared beam between the remote

commander and the remote control

detector on the projector.

9

Connecting the Projector

Preparation

B Preparation

Connecting the Projector

• Make sure all the equipment is powered off when connecting the projector.

• Use the proper cables for each connection.

• Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or

cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself.

• For more information, refer also to the instruction manuals of the equipment you are connecting.

• Use a no-resistance audio cable.

Connection with a computer is explained for each input signal.

INPUT A/INPUT B

• The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/

EX225.

• It is recommended that you set the resolution of your computer to 1280 × 800 pixels (VPL-EW275/

EW245/EW225) or 1024 × 768 pixels (VPL-EX275/EX271/EX245/EX241/EX225/EX221) for

the external monitor.

INPUT C

Notes

Connecting a Computer

For connecting a computer with an RGB output connector.

RGB output

connector

Audio output

connector

Mini D-sub 15-pin cable (supplied)

Computer

Audio cable (Stereo mini plug)

(not supplied)

Notes

For connecting a computer with an HDMI output connector.

HDMI output

connector

HDMI cable

(not supplied)

Computer

10

Connecting the Projector

• Audio output from the HDMI connector is available only on VPL-EW275/EW245/EW225/

EX275/EX245/EX225.

• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.

• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal

or CEC (Consumer Electronics Control) Signal.

USB connector (Type B) ( )

For connecting to a computer with a USB connector (“Projecting an Image using USB

Connection” (page 38)).

Connections with a VHS video deck, DVD player, or BD player are explained for each input

signal.

S VIDEO IN

For connecting video equipment with an S-video output connector.

The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/

EX225.

Notes

Connecting a Video equipment

USB A-B cable (not

supplied)

Computer

USB connector

(Type A)

Note

S video output

connector

Audio output

connector

S video cable (not supplied)

Computer

Audio cable (Phono plug × 2)

(not supplied)

11

Connecting the Projector

Preparation

VIDEO IN

For connecting video equipment with a video output connector.

The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/

EX225.

INPUT A

For connecting video equipment with a YPBPR output connector.

The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/

EX225.

Note

Video cable (not supplied)

Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)

Video output

connector

Audio output

connector

Video equipment

Component – Mini D-sub 15-pin cable (not supplied)

Audio cable (Phono plug × 2 – stereo mini plug) (not supplied)

Video equipment

YP

BPR output

connector

Audio output

connector

12

Connecting the Projector

INPUT C

• Audio output from the HDMI connector is available only on VPL-EW275/EW245/EW225/

EX275/EX245/EX225.

• Use HDMI-compatible equipment and cable(s) that have an HDMI logo on them.

• The HDMI connector of this projector is not compatible with DSD (Direct Stream Digital) Signal

or CEC (Consumer Electronics Control) Signal.

Microphone ( )

For connecting a microphone.

• The microphone input is available only on VPL-EW275/EW245/EW225/EX275/EX245/EX225.

• Only dynamic microphones are supported.

USB connector (Type A) ( )

For connecting a USB memory device (“Using USB Media Viewer” (page 39)).

Notes

Connecting a microphone

Notes

Connecting a USB memory device

Video equipment

HDMI cable

(not supplied)

HDMI output

connector

For connecting video equipment with an HDMI output connector.

Microphone

(not supplied)

USB memory device

(not supplied)

13

Connecting the Projector

Preparation

USB connector (Type A) ( )

For connecting a USB wireless LAN module IFU-WLM3 (not supplied) (“Presentation

Function via Network” (page 35)).

• Undesignated USB wireless LAN modules do not work.

• When connecting/disconnecting the USB wireless LAN module, make sure that the projector is in

Standby mode (Standby Mode: “Low”), or the AC power cord is unplugged from the wall outlet.

OUTPUT

Projected images or input audio can be output to display equipment such as a monitor or audio

equipment such as speakers with a built-in amplifier.

• The audio input connector is available only on VPL-EW275/EW245/EW225/EX275/EX245/

EX225.

• Projected images and audio can be output.

Connecting a USB wireless LAN module

Notes

Connecting an External Monitor and Audio Equipment

Notes

USB wireless LAN module

IFU-WLM3 (not supplied)

Audio cable

(stereo mini plug)

(not supplied)

Audio input

connector

Mini D-sub 15-pin cable

(supplied)

RGB input

connector

Audio equipment

Display equipment

14

Projecting an Image

B Projecting/Adjusting an Image

Projecting an Image

The size of a projected image depends on the distance between the projector and screen. Install

the projector so that the projected image fits the screen size. For details on projection distances

and projected image sizes, see

“Projection Distance” (page 58).

1 Plug the AC power cord into the wall

outlet.

2 Connect all equipment to the projector

(page 9).

3 Press the ?/1 key to turn on the unit.

4 Turn on the connected equipment.

5 Select the input source.

Press the INPUT key on the projector to

display the menu for switching input

signal on the screen. Press the INPUT

key repeatedly, or press the

V/v key to

select an image to be projected.

6 When projecting a computer image,

switch your computer’s output to

external display.

The method to switch the output varies

depending on the type of computer.

(Example)

To project image files stored in a USB

memory device, see “USB Media

Viewer” (page 39). To project an image

using USB Connection, see “Projecting

an Image using USB Connection”

(page 38). To use Presentation Function

via Network, see “Presentation Function

via Network” (page 35).

Computer

Video equipment

Projector

Wall outlet

1

2

5

4

3

6

+

15

Projecting an Image

Projecting/Adjusting an Image

7 Adjust the focus, size and position of

the projected image (page 15).

Adjusting the Projected image

Focus Size (Zoom) Position

Focus ring

Zoom ring

Foot

adjust

button

Front feet

(adjustable)

16

Projecting an Image

Adjusting the tilt of the projector with the front feet (adjustable)

By changing the tilt of the projector with the foot adjust buttons/front feet (adjustable), you can

adjust the position of the projected image.

How to adjust the angle

1 Press and hold the foot adjust buttons.

2 Lift up the front of the projector to

adjust the angle.

3 Release the foot adjust buttons.

4 Turn the front feet (adjustable) to set

the angle of the projector precisely.

• Be careful not to let the projector down on your fingers.

• Do not push hard on the top of the projector with the front feet (adjustable) extended.

Changing the aspect ratio of the projected image

Press the ASPECT key on the remote commander to change the aspect ratio of the projected

image. You can also change the setting in Aspect of the Screen menu (pages 21, 23).

Notes

17

Projecting an Image

Projecting/Adjusting an Image

Correcting trapezoidal distortion of the projected image (Keystone feature)

Normally the Keystone feature automatically adjusts the projected image. The Keystone

feature may not work automatically if the screen is tilted. In this case, set Keystone manually.

1 Press the KEYSTONE key on the remote

commander or select V Keystone in the

Installation menu.

2 Use the V/v/B/b keys to set the value. The

higher the value, narrower the top of the

projected image. The lower the value, the

narrower the bottom.

Since the Keystone adjustment is an electronic

correction, the image may be deteriorated.

Automatically adjusts Phase, Pitch and Shift of projected image while a

signal is input from a computer (APA (Auto Pixel Alignment))

Press the APA key on the remote commander. Press again to cancel adjusting during the setting.

You can also set APA in the Screen Menu (page 22). If Smart APA in the Function menu is set

to “On”, executes APA automatically when a signal is input (page 25).

Note

Increase the number

towards plus

Increase the number

towards minus

18

Projecting an Image

1 Press the ?/1 key on the unit or the remote commander.

The projector starts shutdown and turns off. If you press the ?/1 key within 10 seconds

again, shutdown is cancelled.

2 Unplug the AC power cord from the wall outlet.

To turn off without displaying confirmation message

Press and hold the ?/1 key on the unit for a few seconds (page 44).

ECO gauge

This gauge indicates the current effectiveness of the projector’s ECO function. (For details on

the ECO function, see “ECO MODE key” (page 7) and “ECO” (page 27).)

The leaf icons are displayed when the projector is shut down. The number of displayed icons

varies according to how much energy is saved as a result of using the ECO function.

Turning Off the Power

ECO gauge

19

Using a MENU

Adjustments and Settings Using a Menu

B Adjustments and Settings Using a Menu

Using a MENU

The menu displays used for the explanation below may be different depending on the model you are

using.

1 Press the MENU key to display the

menu.

2 Select the setting menu.

Use the V/v key to select the setting

menu then press the b key or ENTER

key.

3 Select the setting item.

Use the V/v key to select the setting

menu then press the b key or ENTER

key.

To return to the selection screen of the

setting menu, press the B or RETURN

key.

4 Make the setting or adjustment for the

selected item.

The setting method varies, depending on

the setting item.

If the next menu window is displayed,

select the item according to the

operations in step 3 and then press the

ENTER key to register the setting.

To return to the selection screen of the

setting items, press the B or RETURN

key. You can press the RESET key to

reset an item to its factory setting value

to aid setting.

Using a pop-up menu

Press the V/v/B/b key to select an item.

A selected item takes effect

immediately, except “Language”, which

will take effect after you press the

ENTER key.

Using the setting menu

Press the V/v key to select the item.

Press the ENTER key to register the

setting and return to the previous screen.

Using the adjustment menu

To increase the value, press the V/b key

and to decrease the number, press the

v/B key. Press the ENTER key to

register the setting and return to the

previous screen.

5 Press the MENU key to clear the

menu.

The menu disappears automatically if no

operation is performed.

Note

Picture Mode Standard

Reset

Contrast

Brightness

Color

Hue

Color Temp.

Sharpness

Expert Setting

:S el :Set :Back

Picture

Low

Setting menu

80

50

5

Picture Mode Standard

Reset

Contrast

Brightness

Color

Hue

Color Temp.

Sharpness

Expert Setting

:S el :Set :Back

Picture

Low

Setting items

RETURN

Picture Mode

Dynamic

Standa rd

:Back

:S el

Cinema

Game

Blackboard

Presentation

Adjust

Back

Contrast

20

The Picture Menu

The Picture is used to adjust the picture for each input signal.

*1: When a computer signal is input, this option is available.

*2: The settings in the Picture return to their factory defaults, except for Picture Mode.

*3: When a video signal is input, this option is available.

*4: When the signal without color burst signal is input, this option is unavailable.

*5: When an analog TV signal is input, this option may not available, depending on the color system.

*6: When “Picture Mode” is set to the item other than “Presentation” or “Blackboard,” this option

is available.

*7: When “Picture Mode” is set to “Blackboard,” this option is unavailable.

Items Item descriptions

Picture Mode Dynamic: Emphasizes the contrast to produce a dynamic and vivid picture.

Standard: Provides an image which is natural and well balanced.

Presentation

*1

: Provides a bright image, suitable for presentations.

Blackboard: Provides an image suitable for displaying on a blackboard.

Game: Provides an image suitable for viewing games.

Cinema: Provides an image suitable for viewing movies.

Reset

*2

Resets the factory setting.

Contrast The higher the value, the greater the contrast. The lower the value, the lower

the contrast.

Brightness The higher the value, the brighter the picture. The lower the value, the darker

the picture.

Color

*3 *4

The higher the value, the greater the intensity. The lower the value, the lower

the intensity.

Hue

*3 *4 *5

The higher the value, the more greenish the picture becomes. The lower the

value, the more reddish the picture becomes.

Color Temp.

*6

High/Middle/Low: The higher the value, the more bluish the picture. The

lower the value, the more reddish the picture.

Sharpness The higher the value, the sharper the picture. The lower the value, the softer

the picture.

Expert Setting

Gamma

Mode

*1 *7

Graphics1: Gamma correction to make halftones brighter. This setting is

suitable when projecting highly colorful images, such as photos, in a bright

place.

Graphics2: Gamma correction to improve the reproduction of halftones.

Highly colorful images, such as photos, can be reproduced in natural tones.

Text: Improves black and white contrast. Suitable for images with lots of text

content.

Notes

Page is loading ...

Sony EW225 VPL-EX275 User manual

Sony EW225 VPL-EX275 User manual

Related papers

Other documents