LST NG58-1 User manual

Category
Fire protection
Type
User manual

This manual is also suitable for

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
NG58-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Address Module
NG58-1
Description
Specifi cations
The Address Module NG58-1 is an addressable elec-
tronic component, which allows to individually identify
automatic re detectors Series FC600, 100, 300 and
ECO1000 as well as manual call points or contact de-
tectors in conventional technology.
The address module is installed in the detector base
and is preset with the detector address (within the num-
ber range 0 63) by cutting wire jumpers. In case of
alarm, the unique identifi cation of the activated conven-
tional detector is achieved by transmitting the address
to the fi re detection control panel.
Apart from the detector address, on Fire Detection
Control Panels BC216 a possibly parameterised ele-
ment text (for example with the name of the room or
oor) can also be displayed.
In addition to individual addressing, the address mo-
dule can as well be used for addressing a group of
several detectors. Thus, in case of alarm activation,
the address module achieves a summary indication of
this detector group.
Allows to address conventional
detectors Series FC600, 100, 300
and ECO1000
Indication of detector number and
assigned element text on suitable fi re
detection control panels
Output for optional remote indicator
Extremely small design
Installation in the detector base
Current consumption at 24 V 18mA (active)
Ambient temperature -5°C to +50°C
Dimensions L × W × H 32 × 19 × 5 (mm)
Weight 10g
Order number 249020
Order name Address Module/Conv. NG58-1
  • Page 1 1

LST NG58-1 User manual

Category
Fire protection
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI