Transcend TS240GJDM520 User manual

Transcend
Brand
Transcend
Model
TS240GJDM520
Category
Server barebones
Type
User manual

Transcend TS240GJDM520 is a JetDrive SSD upgrade kit, which enables you to upgrade the internal storage of your Mac computer. The kit includes a JetDrive SSD, an enclosure, a P5 screwdriver, and a T5 screwdriver.

The JetDrive SSD is a high-performance solid state drive that is designed to improve the speed and responsiveness of your Mac. It is available in capacities of 128GB, 256GB, and 512GB, so you can choose the size that best fits your needs.

The enclosure is made of durable aluminum and protects the JetDrive SSD from damage. It also has a USB 3.0 interface, which allows you to connect the JetDrive SSD to your Mac via a USB port.

Transcend TS240GJDM520 is a JetDrive SSD upgrade kit, which enables you to upgrade the internal storage of your Mac computer. The kit includes a JetDrive SSD, an enclosure, a P5 screwdriver, and a T5 screwdriver.

The JetDrive SSD is a high-performance solid state drive that is designed to improve the speed and responsiveness of your Mac. It is available in capacities of 128GB, 256GB, and 512GB, so you can choose the size that best fits your needs.

The enclosure is made of durable aluminum and protects the JetDrive SSD from damage. It also has a USB 3.0 interface, which allows you to connect the JetDrive SSD to your Mac via a USB port.

1
User’s Manual
Part 1: How to install a JetDrive SSD Upgrade Kit into your Mac
Part 2: How to install your JetDrive SSD into the enclosure
CAUTION!
Please take the following electrostatic discharge
(ESD) precautions during installation:
1. Work on a static-free surface
2. Wear an anti-static wrist strap
2
Part 1: How to install a JetDrive SSD Upgrade Kit into your Mac
Install
your
JetDrive into the included enclosure.
Please see Part 2 for more details
1
3
Connect the enclosure to your Mac.
2
down
the
“Command+R” keys during startup until it enters
the OS X utility.
3
4
Select “Disk Utility” and click “Continue”.
4
5
Click the
“
Erase
”
tab and select
“
Mac OS
Extended (journaled)” as the format. Enter a
name for your JetDrive. Click “Erase.”
※
Please choose the correct drive before you start
erasing
.
5
You will see the following warning message
before the erase process starts.
Click “Erase” to continue.
6
6
After
the
cloning
process has
completed, shut down
your Mac and remove your JetDrive from the
enclosure.
8
Click the
“
Restore
”
tab, select
“
Macintosh HD
”
as the source and drag your JetDrive partition
into the destination field. Click “Restore” to
start the cloning process. This step may take a
few minutes.
7
7
9
Use the included P5 screwdriver to remove the
back cover and the T5 screwdriver to remove the
screw from the rear of the SSD. Carefully remove
the original SSD and insert your JetDrive. Replace
all screws to finish the installation
※ Remember to disconnect the power adapter prior to installing
your JetDrive.
Turn on your Mac, go to System Preferences and
click Startup Disk. Select your new JetDrive as
the startup disk and restart your Mac.
1
0
8
Download the JetDrive Toolbox software from
www.transcend-info.com to enable TRIM in OSX
for your JetDrive.
1
1
9
Part 2: How to install your JetDrive SSD into the enclosure
SD into the enclosure
Slide off the plastic shipping tape.
1
Remove the USB to S
ATA adapter
from the enclosure.
2
10
Connect your JetDrive to the USB
to SATA adapter
3
Carefully install your JetDrive and USB to SATA
adapter into the enclosure. You may need to
slightly tilt the two boards to slide them in.
4
11
M
ake sure the
USB connect
or
is located correctly
in the opening as shown.
5
Make sure your JetDrive and USB to SATA
adapter is laying flat inside the enclosure
6
12
Orient the bottom cover correctly and affix
the three screws.
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Transcend TS240GJDM520 User manual

Transcend
Brand
Transcend
Model
TS240GJDM520
Category
Server barebones
Type
User manual

Transcend TS240GJDM520 is a JetDrive SSD upgrade kit, which enables you to upgrade the internal storage of your Mac computer. The kit includes a JetDrive SSD, an enclosure, a P5 screwdriver, and a T5 screwdriver.

The JetDrive SSD is a high-performance solid state drive that is designed to improve the speed and responsiveness of your Mac. It is available in capacities of 128GB, 256GB, and 512GB, so you can choose the size that best fits your needs.

The enclosure is made of durable aluminum and protects the JetDrive SSD from damage. It also has a USB 3.0 interface, which allows you to connect the JetDrive SSD to your Mac via a USB port.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents