Setting the channel
At the back of each Door Chime unit there is an ON / OFF, A / B and 1 / 2 channel selector. Ensure that both units have the
same setting. There are 4 channels that can be selected. This will minimise interference with your neighbour’s doorbells.
Choose a setting and switch the units on.
To use
To operate as a standard doorbell: push the “BELL” symbol on the outside unit and the inside unit will chime three times.
To operate as an intercom: press and hold the “TALK” button on the unit. Talk into the unit about 2 inches away from it.
The sound is transmitted through the small “mic” on the front of each unit. The intercom function works both ways. The
outside person can talk to the inside person or vice versa.
To operate as an alarm: If the inside person wishes to activate the alarm on the outside unit, press the “ALARM” button on
the inside unit. The red LED light will activate and an alarm sound will activate on the outside Door Chime unit. To stop the
alarm press the “ALARM” button again.
To reset the units at any time, turn them off and then turn them back on again.
Warnings
Note the maximum range is 75 feet, but this can vary depending on building construction.
Do not fix the Door Chime on or near metal surfaces as this can affect the transmission to the receiver and reduce the
operational range. The building construction, walls and doors can also reduce the range depending on their materials or
thickness.
It is advisable to test the Door Chime before fixing in its final location.
This is not a toy.
Keep away from children.
For domestic use only.
If not in use for at least a month, please remove the batteries to prevent accidental battery leakage.
Packaging
Dispose of packaging at your local recycling centre.
Dispose of paper and carton separately from plastic bags at your local recycling centre.
Dispose of the item at the end of its life at your local recycling centre.