MasterForce 245-1680 is a 36-inch Wingbox designed to provide ample storage and organization for tools and equipment. It features a spacious work surface, multiple drawers, and pegboard panels for hanging tools. The drawers are equipped with a raise and release system for easy opening and closing, and they can be removed for convenient access. The wingbox also includes swivel and rigid casters for mobility, allowing you to easily move it around your workspace.
MasterForce 245-1680 is a 36-inch Wingbox designed to provide ample storage and organization for tools and equipment. It features a spacious work surface, multiple drawers, and pegboard panels for hanging tools. The drawers are equipped with a raise and release system for easy opening and closing, and they can be removed for convenient access. The wingbox also includes swivel and rigid casters for mobility, allowing you to easily move it around your workspace.
©2012 Menard, Inc., Eau Claire, WI 54703 08/ 2012
36" Wingbox
Model #: 245-1680
CAU TION:
To Reduce The Risk Of Injury, User Must Read
And Understand Operator’s Manual. Save These Instructions
For Future Reference.
OPERATOR’S MANUAL
Actual product may differ
slightly from image shown
Page 1 Page 2
TABLE OF CONTENTS
Safety Symbols ......................................................................... 2
Safety Instructions ..................................................................... 3
Parts List ................................................................................... 4
Assembly and Operation ........................................................... 5
Maintenance and Safety ............................................................ 7
SAFETY SYMBOLS
Model #: _______________________________
Place of purchase: ______________________
Date of purchase: _______________________
Receipt # of purchase: __________________
CAU TION:
1. Read and follow all safety and assembly
instructions before using this product for
the first time.
2. Fill in the following information and retain
the manual for future reference:
Do not open more than one drawer at a time.
Do not step on drawers.
Do not allow children near the unit.
Set the brake on the locking casters unless you are moving the unit.
Lock drawers and lid before moving the unit.
Do not lift unit by yourself.
Page 3 Page 4
SAFETY INSTRUCTIONS PARTS LIST
The purpose of safety symbols is to attract our attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understand-
ing. The symbol warnings do not by themselves eliminate any danger. The instructions and
warnings they give are no substitute for proper accident prevention measures.
WARNING:
Be sure to read and understand all safety instructions in this man-
ual, including all safety alert symbols such as “DANGER,” “WARNING,” and “CAUTION,”
before using this product. Failure to follow all instructions listed below may result in
electric shock, re and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. May be
used in conjunction with other symbols or pictographs.
DANGER:
Failure to obey this warning WILL result in death or serious injury to
yourself or to others. Always follow the safety precautions to reduce the risk of personal
injury.
WARNING:
Failure to obey this safety warning CAN result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the risk
of personal injury.
CAU TION:
Failure to obey this safety warning MAY result in personal injury to
yourself or others or property damage. Always follow the safety precautions to reduce
the risk of personal injury.
The keys are taped to the top
storage area of the wingbox.
For service regarding parts, assembly or warranty information, please call: 1-800-459-4409.
Ref# Description Part# Qty
1 Gas strut 303089 2 pcs
2 Peg hooks 313005 10 pcs
3 Slide (R) 300055R 1 pc
4 Tray 107398 4 pcs
5 Swivel caster 302000 2 pcs
6 Washer 324255 16 pcs
7 M8x20 hex bolt 321027 16 pcs
8 Slide (R) 300020R 9 pcs
9 Drawer liner 362044 8 pcs
10 Rigid caster 302001 2 pcs
11 Slide (L) 300020L 9 pcs
Ref# Description Part# Qty
12 Worktop 107383 1 pc
13 Slide (L) 300055L 1 pc
14 Till liner 362898 1 pc
15 Lock 304131 1 pc
16 Cabinet handle 306004 2 pcs
17 Magnet 312045 2 pcs
NOTE: Replacement keys may be ordered
using the required code that appears on
the face of the lock.
Give this information for service parts: part
number and quantity.
Page 5 Page 6
NECESSARY TOOLS REQUIRED
FO R ASSEMBLY
• 14 mm socket
• Extension ratchet
RAISE AND RELEASE
DRAWER FRONTS
These units are equipped with the raise
and release drawer front system.
To open, lift up on the drawer front while
pulling out towards you.
To close, shut the drawer firmly until the
latch engages.
If the drawer does not stay closed, the
drawer contents may be the obstruction,
or the hook may be slightly bent or it may
be rubbing up against the drawer slides. To
resolve this problem, lightly bend the hook
until the drawer engages in the slide.
INSTALL THE CASTERS
Carefully lay the wingbox on its back using
a soft mat under the back for protection.
Position the two swivel casters on the
bottom of the wingbox, on the right side
(same side as the handle). Insert the M8x20
bolts through the washers, then through
the casters and into the bottom of the
wingbox. Tighten securely using a 14 mm
socket. Repeat for the two rigid casters on
the other side of the wingbox.
TO REMOVE DRAWERS
AND WORK TOP
Pull the drawer or the work top out so it is
almost fully extended. PUSH UP ON THE
RIGHT hand black release lever, while
PULLING DOWN ON THE LEFT hand black
release lever. While holding the levers in
the positions as instructed above, pull the
drawer outward until it is released from the
drawer slide.
PUSH UP (RIGHT HAND SIDE)
PULL DOWN (LEFT HAND SIDE)
TO REPLACE
DRAWERS AND
WORK TOP
Extend the drawer or work top slides from
the wingbox. Insert the brackets on each
side of the drawer or work top into the
slots in the wingbox slides, being careful
that they are positioned properly. Once
properly inserted, completely close the
drawer/work top to set the slides in their
proper positions.
ASSEMBLY AND OPERATION ASSEMBLY AND OPERATION
TO HANG THE HOOKS
Step 1
Hold the hook with the
hanger pointing up
and the two prongs
pointing toward the
peg board. Align
the prongs with the
peg board holes and
insert.
Step 2
With the two prongs
inserted in the peg
board as illustrated,
pivot the hook forward
and down.
Step 3
The hook should now
be fully supported by
the peg board and you
may safely hang tools
from it.
TO HANG THE TRAYS
Step 1
Hold the tray with its
top pointing towards
the wingbox and its
front pointing up.
Align the prongs on
the back of the tray
with the holes in the
wingbox and insert.
Step 2
With the two prongs
inserted in the holes
as illustrated, pivot
the tray forward
and down.
Step 3
The tray should now
be fully supported
on the wingbox and
you may safely place
objects in it.
Page 7 Page 8
MAINTENANCE
For casters, use high quality bearing
grease (annually/yearly).
Lubricate the slides (twice a year) with
a product like WD40 or other quality
lubricant. This is especially true as the
temperature decreases, the bearing can
become stiff.
Periodically the drawer fronts, drawer trim,
and other surfaces should be cleaned with
mild detergent and water.
Auto wax will preserve the wingbox’s luster
finish. Apply the wax as you would to a
car. The wax will also help protect the unit
against scratches.
Grease and oil can be removed with most
standard cleaning fluids. For safety, use a
nonflammable cleaning fluid.
SAFETY
WARNING:
Close the cover
and lock the drawers before moving
this product. The drawers could
come open and make the product
unstable and tip, which may cause
personal injury or product damage.
WARNING:
DO NOT attempt to
lift the 36" wingbox by its side handles,
using chains, ropes or other lifting devices,
if two persons cannot lift the wingbox. The
side handle may fail, which may cause
personal injury or damage to the product.
Use a forklift placed under the bottom of
the wingbox if it is too heavy to lift by hand.
WARNING:
DO NOT stand on
this product or lean on the drawers.
WARNING:
WEAR SAFETY
GLASSES when removing or repositioning
the slides. The tool could slip which may
cause personal injury.
CAU TION:
When moving this
product, do not pull it. Push the product to
prevent personal injury.
CAU TION:
USE THE BRAKES
when not moving this product. This will
prevent the product from rolling, which may
cause personal injury or product damage.
CAU TION:
BE CAREFUL when
opening more than one drawer. The product
may become unstable and tip, which may
cause personal injury or product damage.
WARNING:
DO NOT attach or
mount this product on a truck bed or any
other vehicle or moving object. Mounting
this product to any vehicle in any manner
may cause personal injury or product
damage and will void warranty.
CAU TION:
Secure this product
properly before moving it with a forklift.
WARNING:
DO NOT tow with
power equipment. The product could
tip, which may cause personal injury or
product damage.
WARNING:
DO NOT alter this
product in any manner. For example, do not
weld external lockbars or attach electrical
equipment. This may cause product
damage or personal injury.
CAU TION:
Keep the product on
level surfaces. The product could become
unstable and tip if stored or moved on an
uneven surface, which may cause personal
injury or product damage.
CAU TION:
BE CAREFUL when
closing the cover. Remove hands before
the cover closes completely to prevent
personal injury.
CAU TION:
The maximum weight
for each drawer should be no more than
100 lbs.
CAU TION:
The maximum
product weight, including contents, should
be no more than 1050 lbs.
MAINTENANCE AND SAFETY
SAVE YOUR RECEIPTS
THIS WARRANTY IS VOID WITHOUT THEM
Page #
36" Wingbox
LIMITED LIFETIME WARRANTY
MASTERFORCE
®
Tool Cabinets and Chests have been manufactured to the
highest standards of quality and workmanship and are warranted to be free from
defects in materials and workmanship under normal use for the lifetime that you
own the product. If any part of the product is found to be defective during normal
use, the defective product or part will be replaced at our discretion. This warranty
does not cover products that are damaged through accident, abuse, misuse,
commercial/industrial applications or neglect. This warranty also does not
cover any losses, injuries or costs including indirect, incidental or consequential
damages. This warranty may not be transferred or sold. When requesting warranty
service please have the model number, cash register receipt and the date of
purchase available when you call. If the product is defective, we will replace
the defective part at no cost to you. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights and
you may have other rights, which vary from state to state.
For questions / comments, technical assistance or repair parts,
call toll free: 1-800-459-4409 (Monday–Friday, 8:30am–5pm, EST)
-
1
-
2
-
3
-
4
-
5
MasterForce 245-1680 is a 36-inch Wingbox designed to provide ample storage and organization for tools and equipment. It features a spacious work surface, multiple drawers, and pegboard panels for hanging tools. The drawers are equipped with a raise and release system for easy opening and closing, and they can be removed for convenient access. The wingbox also includes swivel and rigid casters for mobility, allowing you to easily move it around your workspace.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Husky 7440946b User guide
-
Husky H36TR6LER User guide
-
Stanley H5TRSY User manual
-
-
HDX C-295BRD User manual
-
Extreme Tools EX5510CHBL Operating instructions
-
Extreme Tools EX5511RCBK Operating instructions
-
Thor HTC7215W User manual
-
Extreme Tools RX192507SBGNBK Operating instructions
-
Frontier XTB7215BS User guide
