Miller E3 Series X-13 Blower Kit Installation guide

Miller
Brand
Miller
Model
E3 Series X-13 Blower Kit
Type
Installation guide
Installation Instructions
X-13 Blower Kit (SKU# 904619)
E3 Series Electric Furnace
¢708832/¤
7088320
O'Fallon, MO
7088320 (Replaces 7087920)
Specifi cations and illustrations subject to change
without notice and without incurring obligations
Printed in U.S.A. (10/07)
INSTALLATION SEQUENCE
Figure 1. Thermostat Connections
Blower Assembly Installation
Note: Retain all screws and fasteners for installation of
new blower assembly.
1. Ensure unit is not powered. Remove furnace door.
2. Disconnect Thermostat wire connections and
unhook the 6-pin blower plug from the control
panel.
3. Remove all screws attaching the blower assembly to
the furnace.
4. Slide out the complete blower assembly.
5. Obtain new Blower assembly equipped with Variable
Torque (X13) motor and slide into the same
position as the removed assembly; fasten with
screws.
6. Plug the 6-pin plug into the control panel.
7. Make the required thermostat wiring connection as
shown in Figure 1.
8. Attach furnace door and restore power.
WARNING:
To avoid risk of electric shock, personal injury,
or death, disconnect electrical power to the unit
before performing any maintenance or service.
The unit may have more than one electric power
supply.
Table 1. Blower Performance
Y W G RH RC
White
Grey
Grey
Red
Green
E3EB FURNACE CONTROL WIRING
5-Wire Thermostat
Wire
nuts
To A/C
Red
Blue
Black
White
Grey
Red
Blue
Black
White
G R W
2
C E O Y
White
Grey
Red
Red
Blue
Black
White
NL T
5
T
1
C
Grey
Green
To
H/P
E3EB FURNACE CONTROL WIRING
To X13 Motor
Heat Pump Thermostat
Wire
nuts
123
45
6
NL T
5
T
1
C
To X13 Motor
Y W G R
White
Grey
Red
Green
E3EB FURNACE CONTROL WIRING
4-Wire Thermostat
Wire
nuts
To A/C
123
45
6
NL T
5
T
1
C
To X13 Motor
123
456
Coil
High Med High Med Med Low Low
4-ton 3.5-ton 3-ton 2.5-ton 2-ton
Static
(ESP)
in W.C.
0.1 1510 1410 1270 1110 910
0.2 1460 1360 1210 1060 960
0.3 1400 1300 1150 1000 800
0.4 1350 1250 1090 950 750
0.5 1280 1180 1040 910 710
0.6 1210 1110 990 860 660
  • Page 1 1

Miller E3 Series X-13 Blower Kit Installation guide

Miller
Brand
Miller
Model
E3 Series X-13 Blower Kit
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents