Siemens WM14E360DN/35 User manual

Type
User manual
1 2 3 4 5
6
End of programme when ...
... (Start/Reload) flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
Cool washing: Select Rinse / Å]Spin .
Press (Start/Reload).
Programmes at lower temperatures:
Rinse / Å]Spin
(deactivate
(Extra rinse)
-button) or
select
l Empty
.
Press (Start/Reload).
Changing the programme, if ...
... you have selected the wrong programme by mistake:
Reselect the programme.
Press (Start/Reload). The new programme starts
from the beginning.
Reloading laundry, if ... a page 5
... (Start/Reload) is selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
Press (Start/Reload).
Correct installation according to the
separate Installation instructions.
Checking the machine
Never use a damaged machine.
Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water
softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load a page 7.
Observe the important information a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
Your washing machine
Congratulations ä You have opted for a modern, high-quality
domestic appliance manufactured by Siemens. This washing
machine is distinguished by its economical water and energy
consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.siemens-home.com
You can find the contact details for your nearest after-sales service
here or in the after-sales service directory (depending on model).
GB 0844 8928999
Calls from a BT landline will be charged at up to 3 pence per
minute. A call set-up fee of up to 6 pence may apply.
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Directive
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Programmes ........................................................................................1
ʋ Setting and adjusting the programme ...........................................3
ʋ Washing ...........................................................................................3/4
ʋ After washing ......................................................................................4
ʋ Individual settings ..........................................................................5/6
ʋ Important information ....................................................................... 6
ʋ Overview of programmes ................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values .........................................................................8
ʋ Care .....................................................................................................9
ʋ Information on the display panel ....................................................9
ʋ Maintenance .................................................................................... 10
ʋ What to do if... .................................................................................. 11
Protection of the environment/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
Wash normally soiled laundry without a pre-wash.
Instead of Ê Cottons 90 °C, choose the programme ü
ÊüCottons 60 °C with the additional function jecoPerfect.
Comparable cleaning result with significantly lower energy
consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
Preparation
Before washing for the first time
Wash once without any laundry a page 9.
Setting** and adjusting programmes
Spin
speed*
Programme selector Start/Reload
Programme selector
for switching the
machine on and off
and for selecting the
programme. Can be
turned in either
direction.
Programmes
Detailed overview of programmes a page 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
Ê Cottons Hard-wearing fabrics
+
Prewash
Hard-wearing fabrics, pre-wash at
30 °C
Mix Different types of laundry
@ SuperQuick 15’ Short programme
Rinse / Å]Spin Laundry washed by hand,
(Extra rinse) button activated; if
only using the spin cycle, deactivate
the button
l Empty Drain rinsing water for (without
final spin)
ÿü/ É Wool Hand/machine-washable wool
Delicates / Silk Delicate washable fabrics
Easy-Care Easy-care fabrics
** If the s symbol flashes in the
display panel, the childproof lock
is active a deactivate, page 5.
Additional functions, the options
button and spin speeds
a Individual settings, page 5.
(Start/Reload)
Washing
1
2
Washing
Detergent drawer with
compartments I, II, ~
Washing machine
door
Compartment ~: Fabric softener, starch
Compartment I: Detergent for pre-wash
ʋ for domestic use only,
ʋ for washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
ʋ to be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
Do not leave children unattended near the
washing machine.
The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
Keep pets away from the washing machine.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Individual settings
ʑ
(Finished in) b h:min options button
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The §’’Finished in’’ time can be set in
increments of one hour up to a maximum of 24 hours. Press the (Finished in) button
repeatedly until the required number of hours is displayed (h = hour). Choose (Start/
Reload). It is not possible to make adjustments once the programme has started.
ʑ
c(Spin speed / without final spin)
Before and while the selected programme is running, you can set the spin speed or
(without final spin,
laundry soaks in the last rinsing water, display panel - - -
). The effects depend
on the programme progress.
The maximum selectable spin speed depends on the model and on which programme is
currently selected.
ʑ
Additional functions a and overview of programmes, see page 7
iøspeedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load a Overview of
programmes, page 7.
jecoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
Sü(Easy-iron) Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
(Extra rinse) Additional rinse cycle. For areas with very soft water or for further
enhancing the spin result.
ʑ
Childproof lock and reloading
s
Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON/OFF: Press and hold the (Start/Reload) button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose (Start/Reload). The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the (Start/Reload) button.
ʑ
(Start/Reload)
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑ
Signal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
Empty pockets.
Look out for metal items (paperclips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function
iøspeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to Ê Cottons 30 °C and press (Start/Reload).
After approx. 10 minutes, press (Start/Reload) to pause the programme. Once the required
soaking time has elapsed, press (Start/Reload) again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first
if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to 1 step, the
display panel
lights up
press and hold
+
1 step, release
Button signals Information signals
Set to 
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1400
1200
800
600
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
Additional
functions
3
Drum
Control panel
Service flap
Programme sequence displays:
üstümü Childproof lock, washing, rinsing, spinning
1 - 24h h:min Programme end after
(Finished in)
Display panel /
Options button
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn the programme
selector to l Empty or select the spin speed.
Press (Start/Reload).
Remove any foreign objects - risk of rusting.
Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models a Refer to installation
instructions
Switching off
Turn the programme selector to Off.
(*depending on the model)
7
Overview of programmes a Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.
Type of
laundry
Additional functions; information
Ê Cottons 30, 40, 60, 90 °C
7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
iøspeedPerfect*, jecoPerfect,
S (Easy-iron), h (Extra rinse)
+
Prewash
ü
40 °C
Easy-Care 30, 40, 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
iøspeedPerfect, jecoPerfect, S (Easy-iron), h (Extra rinse)
Mix 40 °C Fabrics made of cotton or easy-care fabrics
iøspeedPerfect, jecoPerfect,
S (Easy-iron), h (Extra rinse);
different types of laundry can be washed together
Delicates / Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk,
satin, synthetic fibres or blended fabrics (e.g. cur-
tains)
iøspeedPerfect, jecoPerfect,
S (Easy-iron), h (Extra rinse):
no spin between rinse cycles
ÿü/ É Wool cold, 30 °C
Handä or machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to prevent shrinkage of laundry.
Longer programme breaks (fabrics rest in the detergent solution)
@ SuperQuick 15’ 30 °C
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Additional pro-
grammes
Rinse / Å]Spin , l Empty
* Reduced load for additional iøspeedPerfect function.
As a short programme, Mix 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments I and II.
0411/ 9000659936
*659936*
WM14E360DN...
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine
is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration
***
ÊCottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
ÊCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
ÊCottons60 °C* 7 kg 1,33 kWh 60 l 02:41 h
ÊCottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
ncMix 40 °C 3 kg 0,48 kWh 32 l 01:03 h
cDelicates/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
ÿü/ É Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load
Annual energy
consumption
Annual water
consumption
ÊCottons40/60 °C jecoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to
Easy-Care 60 °C and select (Start/Reload). At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove draw completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the correct
dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution a page 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter a page 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump a page 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon a page 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the l Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock.
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for Rinse / Å]Spin / l Empty).
3. Choose (Start/
Reload). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
11
What to do if ...
ʑ
Water is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter a page 10.
Supply hose kinked or trapped?
ʑ
Washing machine door
cannot be opened.
Safety function active. Programme stopped? a page 4.
c (without final spin) selected? a page 3, 4.
Can be opened by emergency release only? a page 9.
ʑ
Programme does not start. (Start/Reload) or (Finished in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate a page 5.
ʑ
Detergent solution is not
drained.
c
(without final spin) selected?
a page 3, 4.
Clean the detergent solution pump a page 10.
Clean the waste pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
Not a fault - water below the visible area.
ʑ
Unsatisfactory spin result.
Laundry wet/too damp.
Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
S (Easy-iron) selected? a page 5.
Selected speed too low? a page 5.
ʑ
The programme duration
changes during the wash
cycle.
Not a fault – the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑ
Spin cycle performed
several times.
Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑ
Residual water in the
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary a page 9.
ʑ
Odour formation in the
washing machine.
Run programme Ê Cottons 90 °C without laundry. Use standard
detergent.
ʑ
Status display³t flashes.
Foam may be coming out
of the detergent drawer.
Too much detergent used? Mix 1 tablespoon of fabric softener
with ½ litre of water and pour into dispenser II (not for outdoor and
down-filled textiles!).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and “wandering
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet a Installation instructions.
Transportation safety devices removed?
Remove the transportation safety devices a Installation
instructions.
ʑ
Noises during spin and
drain cycles.
Clean detergent-solution pump a page 10.
ʑ
Display panel/indicator
lamps do not function
during operation.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence
longer than usual.
Not a fault - unbalanced load detection system adjusts imbalance
by repeatedly distributing the laundry.
Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Select Rinse / Å]Spin or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call customer services a Installation instructions.
Instruction manual
Washing
machine
Observe the safety
instructions on
page 8
.
en
Read these instructions and the separate installation
instructions before operating the washing machine.
1 2
Å]
Å]
l
a
Correct installation according to the
separate Installation instructions.
Checking the machine
Never use a damaged machine.
Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II: Detergent for the main wash, water
softener, bleach, stain remover
a
a
Close the washing machine door. Take care not to trap
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä You have opted for a modern, high-quality
domestic appliance manufactured by Siemens. This washing
machine is distinguished by its economical water and energy
consumption.
Each machine that leaves our factory has been inspected thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.siemens-home.com
You can find the contact details for your nearest after-sales service
here or in the after-sales service directory (depending on model).
GB 0844 8928999
Calls from a BT landline will be charged at up to 3 pence per
minute. A call set-up fee of up to 6 pence may apply.
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with European Directive
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
Contents Page
ʋ Intended use .......................................................................................1
ʋ Programmes ........................................................................................1
ʋ Setting and adjusting the programme ...........................................3
ʋ Washing ...........................................................................................3/4
ʋ After washing ......................................................................................4
ʋ Individual settings ..........................................................................5/6
ʋ Important information ....................................................................... 6
ʋ Overview of programmes ................................................................7
ʋ Safety instructions .............................................................................8
ʋ Consumption values .........................................................................8
ʋ Care .....................................................................................................9
ʋ Information on the display panel ....................................................9
ʋ Maintenance .................................................................................... 10
ʋ What to do if... .................................................................................. 11
Protection of the environment/Conservation tips
Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
Wash normally soiled laundry without a pre-wash.
Instead of Ê Cottons 90 °C, choose the programme ü
ÊüCottons 60 °C with the additional function jecoPerfect.
Comparable cleaning result with significantly lower energy
consumption.
Measure the detergent according to the manufacturer's
instructions and water hardness.
If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
Preparation
a
Spin
speed*
Programme selector
Programme selector
for switching the
machine on and off
and for selecting the
programme. Can be
turned in either
direction.
Programmes
Detailed overview of programmes a page 7.
Spin speed can be selected individually, irrespective of the
selected programme and programme progress.
Ê Cottons Hard-wearing fabrics
+
Prewash
Hard-wearing fabrics, pre-wash at
30 °C
Mix Different types of laundry
@ SuperQuick 15’ Short programme
Rinse / Å]Spin Laundry washed by hand,
(Extra rinse) button activated; if
only using the spin cycle, deactivate
the button
l Empty Drain rinsing water for (without
final spin)
ÿü/ É Wool Hand/machine-washable wool
Delicates / Silk Delicate washable fabrics
Easy-Care Easy-care fabrics
s
a
a
~
Compartment ~: Fabric softener, starch
Compartment I: Detergent for pre-wash
ʋ for domestic use only,
ʋ for washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
ʋ to be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
Do not leave children unattended near the
washing machine.
The washing machine is not to be used by
children or persons not familiar with the
operating instructions.
Keep pets away from the washing machine.
ʑ
b
§
ʑ
c
ʑ
a
iø
a
j
Sü
ʑ
s

ʑ
ʑ
iø
Ê
~

Additional
functions
Programme sequence displays:
üstümü Childproof lock, washing, rinsing, spinning
1 - 24h h:min Programme end after
(Finished in)
Display panel /
Options button
l
a
(*depending on the model)
3 4
End of programme when ...
... (Start/Reload) flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
Cool washing: Select Rinse / Å]Spin .
Press (Start/Reload).
Programmes at lower temperatures:
Rinse / Å]Spin
(deactivate
(Extra rinse)
-button) or
select
l Empty
.
Press (Start/Reload).
Changing the programme, if ...
... you have selected the wrong programme by mistake:
Reselect the programme.
Press (Start/Reload). The new programme starts
from the beginning.
Reloading laundry, if ... a page 5
... (Start/Reload) is selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
Press (Start/Reload).
Sorting and loading laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load a page 7.
Observe the important information a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser and place in the drum.
ä
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Ê ü
Êü j
Before washing for the first time
Wash once without any laundry a page 9.
Setting** and adjusting programmes
Start/Reload
a
Ê
@
Å]
l
ÿü É
** If the s symbol flashes in the
display panel, the childproof lock
is active a deactivate, page 5.
Additional functions, the options
button and spin speeds
a Individual settings, page 5.
(Start/Reload)
Washing
1
2
Washing
Detergent drawer with
compartments I, II, ~
Washing machine
door
~
ʋ
ʋ
ʋ
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
ʑ
b
§
ʑ
c
ʑ
a
iø
a
j
Sü
ʑ
s

ʑ
ʑ
iø
Ê
~

All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
Additional
functions
3
Drum
Control panel
Service flap
Programme sequence displays:
üstümü Childproof lock, washing, rinsing, spinning
h:min Programme end after
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: Turn the programme
selector to l Empty or select the spin speed.
Press (Start/Reload).
Remove any foreign objects - risk of rusting.
Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models a Refer to installation
instructions
Switching off
Turn the programme selector to Off.
5
6
appears on the display
Å]
Å]
-button) or
l
a
a
a
ä
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
Ê ü
Êü j
a
a
Ê
@
Å]
l
ÿü É
s
a
a
~
~
ʋ
ʋ
ʋ
Individual settings
ʑ
(Finished in) b h:min options button
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The §’’Finished in’’ time can be set in
increments of one hour up to a maximum of 24 hours. Press the (Finished in) button
repeatedly until the required number of hours is displayed (h = hour). Choose (Start/
Reload). It is not possible to make adjustments once the programme has started.
ʑ
c(Spin speed / without final spin)
Before and while the selected programme is running, you can set the spin speed or
(without final spin,
laundry soaks in the last rinsing water, display panel - - -
). The effects depend
on the programme progress.
The maximum selectable spin speed depends on the model and on which programme is
currently selected.
ʑ
Additional functions a and overview of programmes, see page 7
iøspeedPerfect For washing in a shorter time with a washing outcome comparable to
that of the standard programme. Maximum load a Overview of
programmes, page 7.
jecoPerfect For saving energy with a washing performance comparable to that of
the standard programme.
Sü(Easy-iron) Special spin sequence with subsequent fluffing. More gentle final spin
- residual moisture in the laundry slightly increased.
(Extra rinse) Additional rinse cycle. For areas with very soft water or for further
enhancing the spin result.
ʑ
Childproof lock and reloading
s
Childproof lock/
Appliance lock
You can lock the washing machine to prevent the functions you have
set from being changed inadvertently.
ON/OFF: Press and hold the (Start/Reload) button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the machine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once the programme
has started.
YES
Reload
If you want to add additional items of laundry after the programme has
started, choose (Start/Reload). The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO: It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the (Start/Reload) button.
ʑ
(Start/Reload)
To start the programme or to subsequently load additional laundry, and to activate/deactivate
the childproof lock.
Individual settings
ʑ
Signal
Important information
Protecting the laundry and the machine
When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
Empty pockets.
Look out for metal items (paperclips, etc.).
Wash delicates in a laundry bag (tights, curtains, underwired bras).
Fasten zips, do up any buttons.
Brush sand out of pockets and collars.
Remove curtain fittings or place in the laundry bag.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the additional function
iøspeedPerfect.
Pre-treat any stains as necessary.
intense Do not load as much laundry.
Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to Ê Cottons 30 °C and press (Start/Reload).
After approx. 10 minutes, press (Start/Reload) to pause the programme. Once the required
soaking time has elapsed, press (Start/Reload) again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour the starch in
accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first
if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1. Activating the mode
for setting the signal
volume
Set to 1 step, the
display panel
lights up
press and hold
+
1 step, release
Button signals Information signals
Set to 
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1400
1200
800
600
üstümü
g.
l
Leave the washing machine door and detergent
a Refer to installation
7
Overview of programmes a Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.
Type of
laundry
Additional functions; information
Ê Cottons 30, 40, 60, 90 °C
7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
iøspeedPerfect*, jecoPerfect,
S (Easy-iron), h (Extra rinse)
+
Prewash
ü
40 °C
Easy-Care 30, 40, 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
iøspeedPerfect, jecoPerfect, S (Easy-iron), h (Extra rinse)
Mix 40 °C Fabrics made of cotton or easy-care fabrics
iøspeedPerfect, jecoPerfect, S (Easy-iron), h (Extra rinse);
different types of laundry can be washed together
Delicates / Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk,
satin, synthetic fibres or blended fabrics (e.g. cur-
tains)
iøspeedPerfect, jecoPerfect,
S (Easy-iron), h (Extra rinse):
no spin between rinse cycles
ÿü/ É Wool cold, 30 °C
Handä or machine-washable fabrics made of wool or
containing wool
Particularly gentle wash programme to prevent shrinkage of laundry.
Longer programme breaks (fabrics rest in the detergent solution)
@ SuperQuick 15’ 30 °C
Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Additional pro-
grammes
Rinse / Å]Spin , l Empty
* Reduced load for additional iøspeedPerfect function.
As a short programme, Mix 40 °C, with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments I and II.
0411/ 9000659936
*659936*
WM14E360DN...
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine
is in operation.
Consumption values depending on model
Programme Load Electricity*** Water***
Programme
duration***
ÊCottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
ÊCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
ÊCottons60 °C* 7 kg 1,33 kWh 60 l 02:41 h
ÊCottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
ncMix 40 °C 3 kg 0,48 kWh 32 l 01:03 h
cDelicates/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
ÿü/ É Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load
Annual energy
consumption
Annual water
consumption
ÊCottons40/60 °C jecoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
l
Å] l
ʑ
ʑ
a
ʑ
a
c a
a
ʑ
a
ʑ
c
a
a
ʑ
ʑ
S a
a
ʑ
ʑ
ʑ
a
ʑ
Ê
ʑ
³t
ʑ
a
a
ʑ
a
ʑ
ʑ
ʑ
Å]
a
a
Ê
iø j
S h
ü
iø j S h
iø j S h
iø j
S h
ÿü É
ä
@
Å] l
iø
Ê
Ê
Ê
Ê
nc
c
ÿü É
Ê j
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to Easy-Care 60 °C and select (Start/Reload). At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove draw completely.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not be necessary if the correct
dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution a page 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter a page 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump a page 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon a page 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pull it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the service flap is half full, close the pump cover
and empty the service flap. Repeat the above steps until all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the l Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock.
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for Rinse / Å]Spin / l Empty).
3. Choose (Start/Reload). Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
ʑ
ʑ
a
ʑ
a
c a
a
ʑ
a
ʑ
c
a
a
ʑ
ʑ
S a
a
ʑ
ʑ
ʑ
a
ʑ
Ê
ʑ
³t
ʑ
a
a
ʑ
a
ʑ
ʑ
ʑ
Å]
a
a
Ê
iø j
S h
ü
iø j S h
iø j S h
iø j
S h
ÿü É
ä
@
Å] l
iø
Ê
Ê
Ê
Ê
nc
c
ÿü É
Ê j

a
a
a
a
l
Å] l
11
What to do if ...
ʑ
Water is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed.
(Start/Reload) not selected?
Tap not turned on?
Filter blocked? Clean the filter a page 10.
Supply hose kinked or trapped?
ʑ
Washing machine door
cannot be opened.
Safety function active. Programme stopped? a page 4.
c (without final spin) selected? a page 3, 4.
Can be opened by emergency release only? a page 9.
ʑ
Programme does not start. (Start/Reload) or (Finished in) time selected?
Washing machine door closed?
Childproof lock active? Deactivate a page 5.
ʑ
Detergent solution is not
drained.
c
(without final spin) selected?
a page 3, 4.
Clean the detergent solution pump a page 10.
Clean the waste pipe and/or drainage hose.
ʑ
Water not visible in the
drum.
Not a fault - water below the visible area.
ʑ
Unsatisfactory spin result.
Laundry wet/too damp.
Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
S (Easy-iron) selected? a page 5.
Selected speed too low? a page 5.
ʑ
The programme duration
changes during the wash
cycle.
Not a fault – the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑ
Spin cycle performed
several times.
Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑ
Residual water in the
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary a page 9.
ʑ
Odour formation in the
washing machine.
Run programme Ê Cottons 90 °C without laundry. Use standard
detergent.
ʑ
Status display³t flashes.
Foam may be coming out
of the detergent drawer.
Too much detergent used? Mix 1 tablespoon of fabric softener
with ½ litre of water and pour into dispenser II (not for outdoor and
down-filled textiles!).
Reduce the detergent dosage for the next wash cycle.
ʑ
Intense noise formation,
vibrations and “wandering
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet a Installation instructions.
Transportation safety devices removed?
Remove the transportation safety devices a Installation
instructions.
ʑ
Noises during spin and
drain cycles.
Clean detergent-solution pump a page 10.
ʑ
Display panel/indicator
lamps do not function
during operation.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑ
Programme sequence
longer than usual.
Not a fault - unbalanced load detection system adjusts imbalance
by repeatedly distributing the laundry.
Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑ
Detergent residues on the
laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Select Rinse / Å]Spin or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call customer services a Installation instructions.
Instruction manual
Washing
machine
Observe the safety
instructions on
page 8
.
en
Read these instructions and the separate installation
instructions before operating the washing machine.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Siemens WM14E360DN/35 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI