MacDon MD #12728 Installation guide

Hello! I am an AI chatbot trained to assist you with the MacDon MD #12728 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

Form 12728 Page 1 of 1

IDLER ROLLER REPAIR KIT

INSTALLATION INSTRUCTIONS

Assemble new idler roller as shown. (Existing parts being re-used are shown dotted.)

NOTES:

1. Capscrews and internal thread of shaft must be free of oil.

2. Use two drops of Loctite “Threadlocker 242” or equivalent on capscrews.

3. Ensure bar weldments (A) and (B) line up when hardware is tightened.