SunBrite SB-POLE-A-S-BL Owner's manual

Type
Owner's manual

This manual is also suitable for

SunBrite SB-POLE-A-S-BL is a mounting pole designed for use with SunBriteTV ceiling mounts and accessories with 1 ½” - 11.5 NPT threads. It is made of durable materials and can support a maximum load weight of 91 kg / 200 lbs. The pole is easy to install and can be used to mount your display at the desired height and angle. It also features a wire access opening for easy cable management. With its lifetime limited warranty, the SunBrite SB-POLE-A-S-BL is a reliable and convenient mounting solution for your outdoor TV.

SunBrite SB-POLE-A-S-BL is a mounting pole designed for use with SunBriteTV ceiling mounts and accessories with 1 ½” - 11.5 NPT threads. It is made of durable materials and can support a maximum load weight of 91 kg / 200 lbs. The pole is easy to install and can be used to mount your display at the desired height and angle. It also features a wire access opening for easy cable management. With its lifetime limited warranty, the SunBrite SB-POLE-A-S-BL is a reliable and convenient mounting solution for your outdoor TV.

SB-POLE-A-S-BL
SB-POLE-A-M-BL
MODELS
© 2017 SunBriteTV® 170920-1320
PRODUCT INFORMATION
PACKAGE CONTENTS
Inner/outer pole assembly (1)
Lock Bolt
1. During ceiling mount assembly, thread
the
pole into the ceiling plate, then to the
mount assembly.
2. Once installation is complete, insert the
through-bolt and secure it with the nut at
the desired length.
3. Tighten all set screws.
4. Optional: route wiring through the pole
and the wire access opening.
CAUTION: This accessory is intended for
use only with a maximum load weight of 91
kg / 200 lbs. Use with heavier than the max-
imum weight indicated may result in insta-
bility causing possible injury. Refer to User
Instructions.
This accessory is for use with SunBriteTV ceiling
mounts and accessories with 1 ½” - 11.5 NPT threads.
Read and thoroughly understand these instructions
before attempting installation. If you are unsure of any
part of the installation process, contact a professional
installer for assistance.
The ceiling or mounting surface must be capable of
supporting four times the combined weight of the
mount and display; otherwise the structure must be
reinforced.
Safety gear and proper tools must be used. Failure to
do so can result in property damage and/or serious
injury.
Follow all instructions and recommendations regard-
ing adequate ventilation and suitable locations for
mounting your display. Consult the owner‘s manual of
your display for more information.
SunBriteTV® Mounts have a Lifetime Limited Warranty. This warranty includes parts on all components
found to be defective in material or workmanship under normal conditions of use. This warranty shall not
apply to products which have been abused, modified or disassembled. Products to be repaired under this
warranty must be returned to SunBriteTV or a designated service center with prior notification and an as-
signed return authorization (RA) number.
Technical Support 866.838.5052
IMPORTANT WARNINGS
INSTALLATION
LIFETIME LIMITED WARRANTY
SB-POLE-A-S-BL
SB-POLE-A-M-BL
MODELS
© 2017 SunBriteTV® 170920-1320
SB-POLE-A-S-BL SB-POLE-A-M-BL
DIMENSIONS
Thread Pitch: 1.5" NPT
14.9”
17.9”
19.4”
26.4”
  • Page 1 1
  • Page 2 2

SunBrite SB-POLE-A-S-BL Owner's manual

Type
Owner's manual
This manual is also suitable for

SunBrite SB-POLE-A-S-BL is a mounting pole designed for use with SunBriteTV ceiling mounts and accessories with 1 ½” - 11.5 NPT threads. It is made of durable materials and can support a maximum load weight of 91 kg / 200 lbs. The pole is easy to install and can be used to mount your display at the desired height and angle. It also features a wire access opening for easy cable management. With its lifetime limited warranty, the SunBrite SB-POLE-A-S-BL is a reliable and convenient mounting solution for your outdoor TV.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI