Blaupunkt THB 200 A Owner's manual

Blaupunkt
Brand
Blaupunkt
Model
THB 200 A
Category
Car subwoofers
Type
Owner's manual
www.blaupunkt.com
Active Subwoofer
THb 200A
7 606 305 001
1_THB_200A_B_12_06.indd 11_THB_200A_B_12_06.indd 1 04.12.2006 11:21:02 Uhr04.12.2006 11:21:02 Uhr
Page is loading ...
3
THb 200A
Deutsch ..................................................4
Technische Daten.......................................... 23
ENGLISH .................................................5
Specifi cations ............................................... 23
FRANÇAIS ..............................................6
Caractéristiques techniques ......................... 23
ITALIANO ................................................7
Dati tecnici.................................................... 23
NEDERLANDS ........................................8
Technische gegevens .................................... 23
Svenska ..................................................9
Tekniska data ................................................ 23
ESPAÑOL ..............................................10
Datos técnicos .............................................. 23
PORTUGUÊS ........................................12
Dados técnicos ............................................. 23
Dansk ...................................................13
Tekniske data ................................................ 23
Polski ....................................................14
Dane techniczne ........................................... 23
ČESKY ..................................................15
Technické údaje ............................................ 23
Slovensky .............................................16
Technické údaje ............................................ 23
ΕΛΛΗΝΙΚΑ ............................................ 17
Τεχνικά χαρακτηριστικά ................................. 23
TürkÇe ..................................................19
Teknik veriler ................................................ 23
Suomi ...................................................20
Tekniset tiedot .............................................. 23
РУССКИЙ .............................................21
Технические характеристики ...................... 23
USA .......................................................22
Specifi cations ............................................... 23
1_THB_200A_B_12_06.indd 31_THB_200A_B_12_06.indd 3 04.12.2006 11:21:03 Uhr04.12.2006 11:21:03 Uhr
Page is loading ...
5
THb 200A
Überprüfen Sie Ihre Einstellungen des THb 200A auch mit
voll aufgedrehtem Bassregler und ggf. eingeschalteter
Loudness. Eine Übersteuerung der Subwoofer-Box durch
zu hoch gewählte Verstärkung (Pos. 1) führt zu verzerrter
Wiedergabe und kann den Lautsprecher zerstören.
Recycling und Entsorgung
Bitte nutzen Sie zur Entsorgung des Produktes die zur
Verfügung stehenden Rückgabe- und Sammelsysteme.
Änderungen vorbehalten
ENGLISH
Introduction
Please read these operating instructions before using the
equipment for the fi rst time.
We provide a manufacturer guarantee for our products
bought within the European Union. The warranty terms
can be called up under www.blaupunkt.de or requested
directly from:
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim, Germany
Safety notes
Please observe the following safety notes during the instal-
lation and connection.
- Disconnect the negative pole of the battery! Observe
the safety notes of the vehicle manufacturer.
- When you drill holes, ensure that you do not damage
any vehicle components.
- If the positive and negative cable are extended, ensure
that the cross section is not less than 2.5 mm
2
.
- An incorrect installation can result in malfunctions of the
electronic vehicle systems or your car sound system.
Installation and connection instructions
With respect to accident safety, the THb 200A must be
secured in a professional way.
When selecting the installation location, select a dry
location that offers suffi cient air circulation for cooling
the amplifi er.
The THb 200A must not be installed on rear shelves, rear
seats or other locations that are open to the front.
The installation location must be suitable to accept the
accompanying screws and provide a fi rm support (see
page 2 / Fig. 1).
The amplifi er power cable must be fi tted with a fuse no
more than 30 cm from the battery to protect the vehicle
battery in case of a short circuit between power amplifi er
and battery. The fuse of the amplifi er protects only the
amplifi er, not the vehicle battery.
Switching on/off
One of the special features of the THb 200A is its automatic
switch-on.
The subwoofer box automatically switches on if a music
signal is received.
If there is no music signal for more than 60 seconds, the
THb 200A automatically switches off.
Connection (see p. 2 /Fig. 2)
Connection 6 is connected to the positive pole of the
battery and connection 7 to negative vehicle ground.
The control of the THb 200A should ideally be a two-
channel control, either via the preamplifi er outputs or the
loudspeaker outputs of the car sound system. A control
solely via the right or left channel is also possible since the
low-frequency portion of the music is generally identical
on both channels.
The preamplifi er outputs are connected to the cinch (RCA)
sockets of the woofer box via a shielded sound cable.
To connect the device, we explicitly recommend the use of
the original Blaupunkt RCA cable 7 607 885 093 (1.3 m) or
7 607 886 093 (5 m).
With control via the loudspeaker outputs, the input con-
nections of pos. 9/: are fed to the closest loudspeaker
cables (front or rear) on the left and right. They are sepa-
rated and connected to the input connections. The polarity
of the + or - connections must be observed. Bridge output
stages (BTL) can also be connected directly without an
additional adapter.
TIM function:
For car sound systems with activated TIM function, the
THb 200 A must be controlled via the loudspeaker out-
puts of the car sound system and not via the RCA inputs
(see page 2 / Fig. 2 of the car sound system operating
instructions).
1 Input sensitivity
2 Phase position
3 Upper cut-off frequency
4 Connector cable
5 Preamplifi er inputs
6 + Battery
7 - Ground
8
Left loudspeaker input
9 Right loudspeaker input
: 10 A fuse
; Status display (PRT/PWR)
1_THB_200A_B_12_06.indd 51_THB_200A_B_12_06.indd 5 04.12.2006 11:21:03 Uhr04.12.2006 11:21:03 Uhr
6
THb 200A
Settings
The following control setting is recommended as basic
setting before putting the device into operation: Sensitivity
(gain) pos. 1 to minimum, phase pos. 2 to 0°, fi lter (cross-
over) pos. 3 to approx. 80 Hz. Switch on the device and
select a musical piece with distinctive bass playback.
Increase the volume of your stereo system to the desired
volume level. Now slowly increase the gain control 1
until you can hear a clear amplifi cation of the bass level.
Next, use the crossover control 3 to select a fi lter setting
that provides a well-contoured bass. You may have to
alternately optimise the gain control setting 1 and the
fi lter setting 3.
A droning bass with excessive volume requires a fi lter
setting with a low frequency.
The phase control must be set so that the bass is integrated
into the acoustic pattern as best as possible and not re-
cognisable as an individual source.
Also check your settings of the THb 200A with the bass
control fully open and, if necessary, with activated loud-
ness. An overloading of the subwoofer box by selecting
an excessive amplifi cation (pos. 1) results in a distorted
playback and can damage the loudspeaker.
Recycling and disposal
Please use the return and collection systems available to
dispose of the product.
Subject to changes
FRANÇAIS
Introduction
Prenez soin de lire ce mode d’emploi avant d’utiliser
l’appareil pour la première fois.
Notre garantie constructeur s'étend à tous les produits
achetés à l'intérieur de l'Union européenne. Vous pouvez
consulter les conditions de garantie sous www.blaupunkt.de
ou les demander directement auprès de :
Blaupunkt GmbH
Hotline
Robert-Bosch-Str. 200
D-31139 Hildesheim
Consignes de sécurité
Veuillez respecter les consignes de sécurité suivantes pen-
dant la durée du montage et du raccordement.
- Déconnectez la borne négative de la batterie ! Respectez
pour cela les consignes de sécurité du constructeur du
véhicule.
- Faites attention en perçant des trous de ne pas endom-
mager les éléments du véhicule.
- En cas de prolongation du câble positif ou négatif, la
section des câbles doit être au minimum de 2,5 mm
2
.
- En cas d'installation incorrecte, des dérangements peu-
vent apparaître sur le système électronique du véhicule
ou sur votre autoradio.
Consignes de montage et de branchement
Le THb 200A doit être fi xé de façon professionnelle pour
des raisons de sécurité contre les accidents.
Concernant le choix de l'emplacement de montage, il
convient de choisir un emplacement sec, qui garantit
une circulation d'air suffi sante pour le refroidissement de
l'amplifi cateur.
Le THb 200A ne doit pas être monté sur les plages arrière,
les banquettes arrière ou d'autres emplacements ouverts
vers l'avant.
La surface de montage doit être adaptée pour la fi xation des
vis fournies et offrir un maintien sûr (voir page 2 / fi g. 1).
Le câble d'alimentation de l'amplifi cateur doit être muni
d'un fusible se trouvant à une distance maximale de 30 cm
de la batterie, afi n de protéger la batterie du véhicule en
cas de court-circuit entre l'amplifi cateur de puissance et la
batterie. Le fusible de l'amplifi cateur protège uniquement
l'amplifi cateur lui-même, pas la batterie du véhicule.
Allumer / éteindre
Le dispositif d'allumage automatique est une particularité
du THb 200A.
En cas d'entrée d'un signal musical, le caisson de grave
s'enclenche automatiquement.
Si le signal musical est absent pendant plus de 60 s, le
THb 200A s'éteint de nouveau automatiquement.
Raccordement (voir page 2 / fi g. 2)
La connexion 6 est reliée au plus de la batterie et la conne-
xion 7 au moins (masse du véhicule). La commande du
THb 200A devrait intervenir idéalement sur deux canaux,
au choix par le biais des sorties du préampli ou les sorties
haut-parleur de l'autoradio. Une commande via le seul ca-
nal droit ou le canal gauche est également possible, étant
donné que la part de fréquence basse des plages musicales
est en principe identique sur les deux canaux.
Les sorties du préampli sont raccordées par l'intermédiaire
d'un câble audio blindé aux fi ches femelles Cinch (RCA)
du caisson de grave.
Pour le raccordement, nous recommandons instam-
ment l'utilisation des câbles Cinch d'origine Blaupunkt
7 607 885 093 (1,3 m) ou 7 607 886 093 (5 m).
En cas de commande par l'intermédiaire des sorties haut-
parleur, les câbles d'entrées pos. 9/: sont acheminés
vers les câbles de haut-parleur (avant ou arrière) gauche et
droit les plus proches. Ceux-ci sont séparés et reliés avec
les connexions d'entrée. La polarité des connexions + ou
- doit être strictement respectée. Les étages de sortie de
ponts (BTL) peuvent également être raccordés directe-
ment, sans adaptateur supplémentaire.
1_THB_200A_B_12_06.indd 61_THB_200A_B_12_06.indd 6 04.12.2006 11:21:04 Uhr04.12.2006 11:21:04 Uhr
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
22
THb 200A
следует управлять THb 200 A не через входы "тюльпан",
а через выходы днамиковЄ автомагнитолы (смотри
страницу 2 / Рис. 2 инструкции по эксплуатации на
автомагнитолу).
1 Входная чувствительность
2 Положение фаз
3 Верхняя пороговая частота
4 Соединительный кабель
5 Входы предусилителя
6 + аккумулятора
7 - массы
8
Левый вход динамика
9 Правый вход динамика
: Предохранитель 10 A
; Индикатор состояния (PRT/PWR)
Настройки
В качестве базовых настроек перед включением мы
рекомендуем следующие положения регуляторов:
чувствительность (Gain) поз. 1 на минимум, фаза поз.
2 на 0°, фильтр (Crossover) поз. 3 примерно на 80 Гц.
Включите систему и выберите музыкальную композицию
с четко выраженными басами.
Увеличьте громкость Вашей стереосистемы до желаемого
уровня. Затем осторожно поворачивайте регулятор
чувствительности 1 до тех пор, пока не услышите
отчетливое усиление уровня басов. Затем с помощью
регулятора Crossover 3 выберите такую настройку
фильтра, которая обеспечивает четко очерченные басы.
Возможно Вам придется попеременно оптимизировать
настройки регулятора чувствительности 1 и фильтра
3.
Вибрирующий бас со слишком высоким уровнем требует
настройки фильтра на более низкую частоту.
Фазный переключатель следует настроить так, чтобы бас
был по возможности хорошо интегрирован в общий звук
и не слышался как отдельный источник.
Проверьте также настройки устройства THb 200A
при максимальном уровне регулятора басов и, при
необходимости, при полной громкости. Перегрузка
сабвуфера из-за слишком сильного усиления (поз.
1) приводит к искажению воспроизведения и может
повредить динамики.
Утилизация и переработка
Для утилизации старой аппаратуры воспользуйтесь
доступными пунктами приема и сбора вторсырья.
Право на внесение изменений сохраняется
USA
Introduction
Please read these operating instructions before using the
equipment for the fi rst time.
We provide a manufacturer guarantee for our products
bought within the European Union. The warranty terms
can be called up under www.blaupunkt.de or requested
directly from:
Blaupunkt USA
2800 South 25th Av.
Broadview, IL 60155
PH: 708-865-5388
FX: 708-450-8511
EM: [email protected]
Safety notes
Please observe the following safety notes during
the installation and connection.
- Disconnect the negative pole of the battery! Observe
the safety notes of the vehicle manufacturer.
- When you drill holes, ensure that you do not damage
any vehicle components.
- If the positive and negative cable are extended, ensure
that the cross section is not less than 2.5 mm
2
.
- An incorrect installation can result in malfunctions of the
electronic vehicle systems or your car sound system.
Installation and connection instructions
With respect to accident safety, the THb 200A must be
secured in a professional way.
When selecting the installation location, select a dry
location that offers suffi cient air circulation for cooling
the amplifi er.
The THb 200A must not be installed on rear shelves, rear
seats or other locations that are open to the front.
The installation location must be suitable to accept the
accompanying screws and provide a fi rm support (see
page 2 / Fig. 1).
The amplifi er power cable must be fi tted with a fuse no
more than 30 cm from the battery to protect the vehicle
battery in case of a short circuit between power amplifi er
and battery. The fuse of the amplifi er protects only the
amplifi er, not the vehicle battery.
Switching on/off
One of the special features of the THb 200A is its automatic
switch-on.
The subwoofer box automatically switches on if a music
signal is received.
If there is no music signal for more than 60 seconds, the
THb 200A automatically switches off.
1_THB_200A_B_12_06.indd 221_THB_200A_B_12_06.indd 22 04.12.2006 11:21:09 Uhr04.12.2006 11:21:09 Uhr
23
THb 200A
Connection (see p. 2 /Fig. 2)
Connection 6 is connected to the positive pole of the
battery and connection 7 to negative vehicle ground.
The control of the THb 200A should ideally be a two-
channel control, either via the preamplifi er outputs or the
loudspeaker outputs of the car sound system. A control
solely via the right or left channel is also possible since the
low-frequency portion of the music is generally identical
on both channels.
The preamplifi er outputs are connected to the cinch (RCA)
sockets of the woofer box via a shielded sound cable.
To connect the device, we explicitly recommend the use of
the original Blaupunkt RCA cable 7 607 885 093 (1.3 m) or
7 607 886 093 (5 m).
With control via the loudspeaker outputs, the input con-
nections of pos. 9/: are fed to the closest loudspeaker
cables (front or rear) on the left and right. They are sepa-
rated and connected to the input connections. The polarity
of the + or - connections must be observed. Bridge output
stages (BTL) can also be connected directly without an
additional adapter.
TIM function:
For car sound systems with activated TIM function, the
THb 200 A must be controlled via the loudspeaker out-
puts of the car sound system and not via the RCA inputs
(see page 2 / Fig. 2 of the car sound system operating
instructions).
1 Input sensitivity
2 Phase position
3 Upper cut-off frequency
4 Connector cable
5 Preamplifi er inputs
6 + Battery
7 - Ground
8
Left loudspeaker input
9 Right loudspeaker input
: 10 A fuse
; Status display (PRT/PWR)
Settings
The following control setting is recommended as basic
setting before putting the device into operation: Sensitivity
(gain) pos. 1 to minimum, phase pos. 2 to 0°, fi lter (cross-
over) pos. 3 to approx. 80 Hz. Switch on the device and
select a musical piece with distinctive bass playback.
Increase the volume of your stereo system to the desired
volume level. Now slowly increase the gain control 1
until you can hear a clear amplifi cation of the bass level.
Next, use the crossover control 3 to select a fi lter setting
that provides a well-contoured bass. You may have to
alternately optimise the gain control setting 1 and the
fi lter setting 3.
A droning bass with excessive volume requires a fi lter
setting with a low frequency.
Technische Daten, Specifi cations, Caractéristiques techniques, Dati tecnici,
Technische gegevens, Tekniska data, Datos técnicos, Dados técnicos, Tekniske data,
Dane techniczne, Technické údaje, Technické údaje, Τεχνικά χαρακτηριστικά, Teknik
veriler, Tekniset tiedot, Технические характеристики, Specifi cations
Max Power 140 W
RMS Power 70 W (DIN 45324 @14,4 V)
I max/min 10 A / <3 mA
Phase 0° / 180°
Frequency response 30-120 Hz
Low pass fi lter 40-120 Hz
Gain 0.1V-8 V
Cone size 200 mm / 8"
Cone material Aluminium Compound
High Level Input
Size (WxHxD) mm 340 x 225 x 71 (13.4" x 8.9" x 2.8")
Weight 4.3 kg
1_THB_200A_B_12_06.indd 231_THB_200A_B_12_06.indd 23 04.12.2006 11:21:09 Uhr04.12.2006 11:21:09 Uhr
07.2006
CM-AS/SCS1- 8 622 404 860/B
Blaupunkt GmbH
Robert-Bosch-Str. 200
D-31139 Hildesheim
Service-Nummern, Service numbers, Numéros de service, Numeri del servizio di
assistenza, Servicenummers, Servicenummer, Números de servicio, Números de
serviço, Servicenumre, Numery serwisowe, Servisní čísla, Servisné čísla, Τηλέφωνα
σέρβις, Servis numaraları, Palvelunumerot, Номера службы сервиса
Country: Phone: Fax:
Germany (D) 0180-5000225 05121-49 4002
Austria (A) 01-610 39 0 01-610 393 91
Belgium (B) 02-525 5444 02-525 5263
Denmark (DK) 44 898 360 44-898 644
Finland (FIN) 09-435 991 09-435 99236
France (F) 01-4010 7007 01-4010 7320
Great Britain (GB) 01-89583 8880 01-89583 8394
Greece (GR) 210 94 27 337 210 94 12 711
Ireland (IRL) 01-46 66 700 01-46 66 706
Italy (I) 02-369 6331 02-369 6464
Luxembourg (L) 40 4078 40 2085
Netherlands (NL) 00 31 24 35 91 338 00 31 24 35 91 336
Norway (N) 66-817 000 66-817 157
Portugal (P) 2185 00144 2185 00165
Spain (E) 902 52 77 70 91 410 4078
Sweden (S) 08-7501850 08-7501810
Switzerland (CH) 01-8471644 01-8471650
Czech. Rep. (CZ) 02-6130 0446 02-6130 0514
Hungary (H) 76 511 803 76 511 809
Poland (PL) 0800-118922 022-8771260
Turkey (TR) 0212-335 06 71 0212-3460040
USA (USA) 800-950-2528 708-865-5296
Brasil
(Mercosur) (BR) 0800 7045446 +55-19 3745 2773
Malaysia
(Asia Pacifi c) (MAL) +604-6382 474 +604-6413 640
1_THB_200A_B_12_06.indd 241_THB_200A_B_12_06.indd 24 04.12.2006 11:21:10 Uhr04.12.2006 11:21:10 Uhr
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Blaupunkt THB 200 A Owner's manual

Blaupunkt
Brand
Blaupunkt
Model
THB 200 A
Category
Car subwoofers
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents