DaVinci 5152 Assembly And Operation Manual

DaVinci
Brand
DaVinci
Model
5152
Type
Assembly And Operation Manual

This manual is also suitable for

!!PLEASE READ!!
Assembly of this furniture is easier with two
people. Assemble furniture on debris free
carpets or on the enclosed foam sheets to
prevent scratching of finish. Using any
power tools to assemble this furniture may
potentially strip the wood. DO NOT
OVERTIGHTEN SCREWS. DO NOT USE
THE CHANGING TABLE IF IT IS
DAMAGED OR BROKEN.
WARNING!
!
page 1
Congratulations on purchasing an MDB Family product. This changer will provide many years of service if
you adhere to the following guidelines for assembly, maintenance and operation. This changer is for residential
use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling
the changer in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All
of our changers are made from natural woods. Please understand that natural woods have color variations
which are the result of nature and are not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND
HARDWARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO
STYLISTIC VARIATIONS.
Changer (5152) - Assembly and Operation Manual
READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE, ADD-ON
CHANGING UNIT, OR CONTOURED CHANGING PAD.
revised 21JUL2015
The recommended maximum weight of
the occupant is 30 lbs.
READ ALL INSTRUCTIONS
BEFORE USING THE
PRODUCT. KEEP THE
INSTRUCTIONS FOR
FUTURE USE.
KEEP THIS MANUAL IN A
SAFE PLACE FOR FUTURE
REFERENCE.
A. Left and Right
Side Panel (2)
PARTS
page 2
C. Left and
Right Door
(2)
G. Foot (4)
H. Shelf (2)
J2. Top Panel
K. Changing
Pad
B. Center Panel
GG. Rear Top Support Panel
HH. Rear Bottom Support
Panel
J1. Bottom
Panel
D. Top Front Support Panel
E. Top Rear Support Panel
F1. Bottom Front Panel
Side
View
ZZ. Knob (2)
S. 1” Phillips
Head Bolt (2)
BB. 1/2”
Washer (10)
HARDWARE
N. 1 5/8” flat head
screw (8)
M. 2 3/4” Allen head bolt (8)
X. Metal Dowel (8) Y. Door Peg (4)
R. Barrel nut (8)
DD. Door
Catch (2)
EE. Screw
Plate (2)
FF. Allen
Wrench
AA. Strap
T. 5/8” Pan Head
Screw (4)
U. 5/8” Flat Head
Screw (8)
Tools Needed
(not included)
Phillips
screwdriver
JJ. Wood
Dowel (4)
KK. 1 1/4” Allen
head bolt (2)
1
All barrel nuts are threaded and come pre-attached to the bolts. Please
ensure you have the correct number of barrel nuts needed as indicated
in the instruction manual before assembly.
BARREL NUT - ADDITIONAL INSTRUCTION
2
All barrel nuts are threaded and come pre-attached to the bolts. Please
ensure you have the correct number of barrel nuts needed as indicated
in the instruction manual before assembly.
page 3
page 4
R
X
X6
R
X2
1
D
E
R
R
R
R
X
X
X
F1
X
X
X
HH
R
R
R
R
ASSEMBLY INSTRUCTIONS
* The bolt may not be able to screw through the barrel
nuts smoothly. It is suggested to use a flat screwdriver
to stabilize and adjust the direction of the barrel nut.
Flat Screwdriver
Please follow the rest of the instruction steps in the instruction manual to complete the assembly
.
Please use an Allen wrench to screw the bolt with the
lock washer straight into the threaded nut until it is tight.
.
Allen wrench
3
page 5
2
3
A
N
NN
N
G
G
G
F1
BB
A
M
M
HH
BB
JJ
JJ
GG
X2
JJ
page 6
4
J1
HH
5
X
* Attach the door catches
(DD) on both sides of
center panel (B).
X
U
U
U
U
DD
DD
X
B
page 7
6
7
* Make sure to align the pre-
attached metal dowel on
the center panel (B) with the
pre-drilled hole in the top
panel (D).
BB
M
BB
D
E
A
B
F1
M
* NOTE: Do not
tighten the top front
panel (D) until after
the door attachment
in step 10.
T
T
B
F1
* Metal dowels (X)
must be inserted into
the pre-drilled holes in
the bottom front panel
and rear panels (F1,
GG & HH).
HH GG
BB
KK
X2
page 8
8
9
A
B
F1
J2
D
F1
Y
D
X4
page 9
* Tighten the top support rail (D) when
finished.
10
U
S
S
U
C. Left Door
C. Right Door
ZZ
EE
ZZ
EE
D
11
M
M
BB
BB
BB
BB
M
M
A
X
X
D
F1
E
JJ JJ
* NOTE: Make sure that the barrel nuts
(R) are placed in the proper position
in the pre-drilled holes in the support
panels (D, E & F1).
R R
* Stand the unit upright on its feet.
K
H
A
AA
E
D
T
12
13 14
X2
page 10
3/16”
2”
15C.1
15C.2
15C15A 15B
15D
15E
Long
screw
Short
screw
Serious or fatal crushing can occur when furniture tips over on children. To help prevent tip-over, follow the
steps below to install this anti-tipping strap.
Tools Needed (not included)
Phillips
screwdriver
Pencil
Stubby
Screwdriver
X 2X 1
X 2X 1
X 1
X 1
WARNING
Place heaviest item in the lowest drawers.
do not set TVs or other heavy objects on
top of this product.
Never allow children to climb or hang on
drawers, doors, or shelves.
Never open more than one drawer at a time.
(OR)
Do not defeat or remove the drawer interlock
system.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Unless specifically designed to accommodate,
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
FURNITURE ANTI-TIPPING KIT INSTALLATION
15
Finish
page 11
WARNING
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
This is permanent label. Do not attempt to remove!
Serious or fatal crushing injuries can occur
from furniture tip-over. To help prevent
tip-over:
Place heavies t item in the lowes t drawers.
Never
allow children to climb or
hang on
drawers,
doors, or shelves .
Never
open more than
one drawer at a time .
(OR)
Do
not defeat or remov e the drawe r interloc k
system .
do not set TVs or other
heavy
object s on
top of this product.
Unless specifically designed to accommodate,
Install tipover restraint provided.
page 12
To prevent death or
serious injury, always
keep child within arm’s
reach. Never leave child
unattended and always
use restraining system.
ONE YEAR LIMITED WARRANTY:
WARNING!
FALL HAZARD
TO PREVENT DEATH OR SERIOUS
INJURY, ALWAYS KEEP CHILD WITHIN
ARM’S REACH.
WARNING:
READ ALL INSTRUCTIONSBEFORE ASSEMBLINGTHIS
PRODUCT. KEEP THE MANUAL FOR FUTUREUSE.
WARNING!
FALL HAZARD
Registering your product is even easier than
before. You can register your product on our
website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER
REPLACEMENT OR MISSING
PARTS
PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY
855 WASHINGTON BLVD.
MONTEBELLO, CA 90640
Storage:
Pine woods exchange moisture with the air adjust-
ing to major changes in room temperature and
humidity. Therefore, it is best to place your furniture
away from heating or air-conditioning vents.
Sunlight is not friendly to solid wood furniture and
prolonged direct exposure to harsh sunlight can
discolor the finish. Be careful not to place your furni-
ture in direct sunlight for extended periods of time. As
with all your fine furniture, blot up spills immediately.
•
•
Care and Cleaning:
•
• Always secure this pad to the changing surface (removable
or stationary changing tray) by placing the pad within the
boundaries of the tray. See instructions.
• The pad is to be used on a surface that is level, stable and
structurally sound with a minimum surface dimension of
34” by 17”.
• Read all instructions before use of the changing table.
• Do not use changing table if it is damaged or broken.
• This product is not intended to be used as a changing table
without adult supervision. Use of the product without this
may result in death or serious injury to your child from falling.
Follow all instructions on attaching and using the changing
table.
• Only use the pad provided by MDB FAMILY.
• The maximum weight of the child for which the changing
table is intended is 30 lbs.
• Stop using this changing table when the child is able to sit
up or roll over.
• As with all infant and baby furniture, it is important to check
fasteners, screws, and bolts periodically for tightness.
Parents should ensure a safe environment for their child by
checking the furniture regularly before placing the child in the
product.
• When using this product, always secure the child with the
safety strip.
page 12
Restraint System
Step 1.
Place a baby on the pad with his/her bottom on the
top of the diaper. Safely secure the baby on the pad
with the safety straps and buckle on the pad. This
helps prevent the baby from falling off the pad,
which can result in severe injury or even death of
the baby.
Step 2.
Remove the dirty diaper from the baby.
Step 3.
Push the baby’s legs forward and create a cavity
under the baby’s bottom. Clean the baby.
Step 4.
Reattach the new diaper to a clean and happy
baby!
During the diaper changing process, be sure always to keep one hand on the baby to prevent the baby from falling off the
changing pad. Falling from the changing pad could cause severe injury or even death to the baby.
WARNING:
page 13
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

DaVinci 5152 Assembly And Operation Manual

DaVinci
Brand
DaVinci
Model
5152
Type
Assembly And Operation Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents