Ferm CDM1112S User manual

EN

DE

NL

FR

ES

PT

IT

SV

FI

NO

DA

HU

CS

SK

PL

LT

LV

RO

RU

EL

AR

TR

www.ferm.com

Original instructions 05

Übersetzung der Originalbetriebsanleitung 11

Vertaling van de oorspronkelijke gebruiksaanwijzing 18

Traduction de la notice originale 25

Traducción del manual original 32

Tradução do manual original 39

Traduzione delle istruzioni originali 46

Översättning av bruksanvisning i original 53

Alkuperäisten ohjeiden käännös 59

Oversatt fra orginal veiledning 65

Oversættelse af den originale brugsanvisning 71

Eredeti használati utasítás fordítása 77

Překlad püvodního návodu k používání 83

Prevod izvirnih navodil 90

Tłumaczenie instrukcji oryginalnej 97

Originalios instrukcijos vertimas 104

Instrukciju tulkojums no oriģinālvalodas 110

Traducere a instrucţiunilor originale 116

Перевод исходных инструкций 123

Μετάφραση του πρωτοτύπου των οδηγιών χρήσης 130

 137

Orijinal talimatların çevirisi 142

CDM1112S

Page is loading ...

5

EN

Cordless Li-Ion drill 10.8V

CDM1112S

Thank you for buying this Ferm product. By doing

so you now have an excellent product,

delivered by one of EUrope’s leading suppliers. All

products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result in

electric shock, fire and/or serious injury. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Risk of electric shock

Variable electronic speed

Rotation, left/right

Do not use in rain

Indoor use only

Class II machine - Double insulation - You

don’t need any earthed plug.

In case of failure, the transformer is not

dangerous

Max temperature 40

0

C

Do not throw the battery into fire

Do not throw the battery into water

Do not dispose of the product in

unsuitable containers.

Separate collection for Li-ion battery.

Time-lag miniature fuse-link

The product is in accordance with the

applicable safety standards in the

EUropean directives.

Additional safety warnings for drills

and screw drivers

a) Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

b) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

c) Hold power tool by insulated gripping

surfaces, when performing an operation

where the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make

exposed metal parts of the power tool “live”

and could give the operator an electric shock.”

Battery tool use and care

a) Recharge only with the charger specified by

the manufacturer. A charger that is suitable

for one type of battery pack may create a risk

of fire when used with another battery pack.

6

EN

b) Use power tools only with specifically

designated battery packs. Use of any other

battery packs may create a risk of injury and

fire.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a fire.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, flush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

Service

a) Have your power tool serviced by a

qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

For the charger

Intended use

Charge only 10.8V MAX.1.3Ah Li-ion type

rechargeable battery packs. Other types of

batteries may burst causing personal injury and

damage.

a) The appliance is not to be used by persons

(including children) with reduced physical,

sensory or mental capabilities, or lack of

experience and knowledge, unless they

have been given supervision or instruction

b) Children being supervised not to play with

the appliance

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Residual risks

Even when the power tool is used as

prescribed it is not possible to eliminate all

residual risk factors. The following hazards

may arise in connection with the power tool’s

construction and design:

a) Health defects resulting from vibration

emission if the power tool is being used

over longer period of time or not adequately

managed and properly maintained.

b) Injuries and damage to property to due to

broken accessories that are suddenly dashed.

Warning! This power tool produces an

electromagnetic field during operation.

This field may under some circumstances

interfere with active or passive medical

implants. To reduce the risk of serious or

fatal injury, we recommend persons with

medical implants to consult their

physician and the medical implant

manufacturer before operating this

power tool.

Power cord replacement

If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly

qualified persons in order to avoid a hazard.

Mains plug replacement (UK plug of charger

only)

If the molded 3-pin plug attached to the unit is

damaged and needs replacing, it is important

that it is correctly destroyed and replaced by

an approved BS1363/5A fused plug and that

the following wiring instructions are followed.

The wires in the mains cable are colored in

accordance with the following code:

   

  

As the colors of the wires in the mains cable of the

unit may not correspond to the colored markings

identifying the terminals in the plug, proceed as

follows:

 

connected to the terminal which is marked

with the letter N or colored black.

 

connected to the terminal which is marked

with the letter L or colored red.

2. MACHINE INFORMATION

Intended use

This cordless drill is intended for driving in and

loosening screws as well as for drilling in wood,

metal and plastic.

7

EN

Technical specifications

Model No CDM1112S

Charger CDA1079S

Input of charger

100-240V~ 50/60Hz

Max.1A

Output of charger 12.6V DC 2A

Rechargeable battery pack 10,8 V

Li-ion 1.3Ah

Battery charging time 45 minutes

Chuck capacity 0.8 - 10 mm

Torque settings 20 + Drill mode

No load speed

Position 1:

Position 2:

0-350 /min

0-1200 /min

Weight (incl. battery) 1,02 kg

Sound pressure level L

PA

65.17 dB(A), K=3dB(A)

Sound power level L

WA

76.17 dB(A), K=3dB(A)

Hand-arm vibration a

h

(screwdriving without impact)

0.846 m/s

2

K=1.5 m/s

2

Hand-arm vibration a

h,D

(Drilling into metal)

1.739 m/s

2

K=1.5 m/s

2

Vibration level

The vibration emission level stated in this

instruction manual has been measured in

accordance with a standardized test given in

EN60745; it may be used to compare one tool

with another and as a preliminary assessment of

exposure to vibration when using the tool for the

applications mentioned.

 

different or poorly maintained accessories,

may significantly increase the exposure level.

 

when it is running but not actually doing the

job, may significantly reduce the exposure

level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns.

Description

The numbers in the text refer to the diagrams on

pages 2- 4

Fig. A

1. Machine

2. Battery

3. Battery unlock button

4. Battery charge indication

5. Charger

6. Charger LED indicator

7. Chuck

8. Gear selection switch

9. Direction switch

10. On / off switch

11. Torque adjustment ring

12. Work light

13. Belt hook

Lithium-Ion technology

The batteries provided with this machine have

Lithium-Ion technology.

One advantage of using Lithium-Ion

batteries is that, until the battery is almost

empty, hardly and power fading is

noticeable. The machine can be used

until you start noticing that the power of

the drill is elapsed. The battery is

discharged now and needs to be

charged.

Another advantage is that Lithium-Ion

batteries have no memory effect.

Therefore they can be charged at any

moment without degrading, independent

of the charging state of the battery.

3. OPERATING

The battery must be charged before first

use.

Removing the battery from the machine

Fig. B

 

 



the battery out of the machine like shown in

Fig. B.

8

EN

Inserting the battery into the machine

Fig. B

Ensure that the exterior of the battery is

clean and dry before connecting to the

charger or machine.

 

 

machine as shown in Fig. B.

 

into place.

Checking the battery charging status

Fig. C

The included battery is delivered in partly

charged condition.

 

the battery into the machine.

 



 

the charge level, the more lights that burn, the

more charge the battery has left.

 

the battery is empty and must be charged

immediately.

Charging the battery (with the charger)

Fig. D

 

 



 

slot.

 

and wait for a while. The LED indicator on



charger status.

LED indicator (6)

Fig.D



indicates the status of the charging process:

LED color LED status Charger status

Off Off No power or no battery is inserted

Green Blinking Battery charging in progress

Green On

Battery charging finished, battery

fully charged

Red Blinking

The battery is not inserted correctly

into the charger or, the battery is

defective and needs to be replaced

Red On

Battery is too hot, charging

progress is on hold. Charging will

start automatically after the battery

has cooled down.

 

to 45 minutes.

 

charger plug from the outlet and remove the

battery from the charger.

 

on the machine.

Lithium-Ion cells can be stored for a long

period without losing much of their

charge. When the machine is not being

used over a longer period of time it is

best to store the battery in charged

condition.

Fitting and removing drills or screwdriver bits

Fig. E

Always remove the battery before

mounting an accessory.



screwdriver bits with round shaft as well as

hexagonal shaft.

 

 

with your other hand in clockwise direction

until it is opened far enough for the bit to slide

in.

 

 



9

EN

 

activating the machine´s on/off switch.

Adjusting the gears

Fig. F

Never switch gears when the motor is

running, this will damage your machine.

Never put switch in the middle between

both positions, this will damage your

machine.

The machine has 2 drill speeds, which can be





shows which position is chosen.

 

diameter or screw driving. The machine has

high power at a low speed.

 

diameter

Adjusting the direction of rotation

Fig. G

  in

order to drive screws or to use it for drilling.

  in

order to remove screws.

Switching the machine on and off

Fig. G



machine and adjusting rotation speed.

 

the machine, the further the switch is being

pushed, the faster the drill will turn.

 

machine.

 

middle position to lock the movement of the

on/off switch. It cannot be activated in this

position.

Only lay down the machine when it has

stopped running completely. Do not

place it on a dusty surface as particles of

dust could get into the mechanism.

Adjusting the torque

Fig. G

The machine has 20 different torque settings

and a special drill mode to set the power being

transmitted to the chuck.



screws can be driven to a predetermined depth,

which is ideal for repetitive work. The higher the

number, the more torque will be transmitted.

 

work material.

 

work materials and when removing screws.

 

low as possible when driving screws. Select

a higher setting if the motor slips before the

screw is fully tightened.

 



) by fully turning it

counterclockwise.

Ensure that the direction switch (9) is

always set to during drilling.

The machine is equipped with electronic

overload protection function. When the

machine gets overloaded it will shut

down automatically. When this happens,

please wait for a few seconds to let the

overload protection reset itself.

Work light (12)

Fig. A

The machine is equipped with a work light to

illuminate the work location.

 

switch is being pressed.

 

switch is released again.

Belt hook (13)

Fig. A

The machine is equipped with a belt hook for

hanging the machine to your belt during use.

Always switch the direction switch (9) to

middle position to avoid accidental

startup of the machine.

10

EN

 

assembled to the left side of the machine.

 

screw on the hook and taking it off.

 

machine when this is preferred.

User tips

When driving screws into wood, metal and other

materials:

 

screw bit is properly fitted and centered inside

the drill chuck.

 

dimensions. When unsure, always try if the bit

fits on the screw head without any free play

before using the machine.

 

it contacts the screw. A rotating bit may slip.

This could result in damage to the work piece.

When drilling into wood, metal and other

materials:

 

speed. For large diameter drills use a low drill

speed.

 

soft materials select a high drill speed.

 

using a clamp or vice.

 

hole frequently so swarf or drill dust will be

removed.

When drilling in metal:

 

should cool the bit with oil.

 

plastic.

4. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that

the ventilation openings are free of dust and



cloth moistened with soapsuds. Do not use any

solvents such as gasoline, alcohol, ammonia,

etc. Chemicals such as these will damage the

synthetic components.

WARRANTY

The warranty conditions can be found on the

separately enclosed warranty card.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected

at the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic

waste. According to the EUropean Guideline

2012/19/EU for Waste Electrical and Electronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

The product and the user manual are subject

to change. Specifications can be changed

without further notice.

Page is loading ...

148

Spare parts list

Position Description No

7 + 9 Motor with pinion gear 101122

8, 11 till 43 Gear box assembled 101123

47,49,51 Switch, Terminal block, PCB assembly 101124

1 + 2 Belt hook + screw 101125

Battery bottom cover 101126

44 Chuck 101127

45 Left screw for chuck M5 x 24 101128

57 10.8V battery Li-ion 1.3Ah CDA1075S

 CDA1079S

149

Exploded view

Page is loading ...

1507-13

Ferm CDM1112S User manual

Ferm CDM1112S User manual

in other languages

Related papers

Other documents