GBC 4400310 User manual

Page is loading ...

4

Special notice

Thank you for choosing a GBC Binding Machine. We aim

to produce quality binding machines at an affordable

price, with many advanced features to enable you to

create excellent results every time. Before using your

machine for the ﬁrst time, please take a few minutes to

read through this guide.

Speciﬁcations

GBC CombBind C12

Letter, DIN A4 – 297mm

Max. 12 sheets (80gsm)

Max 1 sheet, 0.2mm each

5.2 kg

380x330x130x140mm

Max. width of paper

Punching capacity paper

Punching capacity, plastic covers

Net weight

Dimensions (W x D x H)

Safety instructions

YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS

IS IMPORTANT TO ACCO BRANDS EUROPE. IN THIS

INSTRUCTION MANUAL AND ON THE PRODUCT

ARE IMPORTANT SAFETY MESSAGES. READ THESE

MESSAGES CAREFULLY.

m

Maintenance

Please ensure that the clippings tray is emptied on a

regular basis. This will prevent blockage and ensure that

the unit is always ready to punch. The clippings tray can

be accessed from the back of the machine.

In order to prevent overloading never try and

punch more than the maximum number of sheets

recommended (12 sheets of 80gsm).The unit is

maintenance free if handled correctly.

Service

Contact an authorised GBC service representative for

any required repairs.

Helpful hints

Place front covers ﬁnish side down on the open comb

and the back covers ﬁnish side up.

For best results always use GBC brand covers with GBC

colour-coordinated binding combs.

The binding comb can be opened and closed again at

any time to replace or add individual sheets (see step 2).

Subject to technical changes without prior notice.

5

G

Guarantee

Operation of this machine is guaranteed for two years

from date of purchase, subject to normal use. Within

the guarantee period, ACCO Brands Europe will at its

own discretion either repair or replace the defective

machine free of charge. Defects due to misuse or use

for inappropriate purposes are not covered under the

guarantee. Proof of date of purchase will be required.

Repairs or alterations made by persons not authorised

by ACCO Brands Europe will invalidate the guarantee.

It is our aim to ensure that our products perform to the

speciﬁcations stated. This guarantee does not affect

the legal rights which consumers have under applicable

national legislation governing the sale of goods.

Register this product online at www.gbceurope.com

How to bind

1

Count pages in document (ﬁg.1)

Include any cover sheets that you are using in this

count. Add 2 to your ﬁnal count for each cover sheet

selected (4 for every heavy-duty or semi-rigid cover

sheet).

2

Select comb which ﬁts your document (ﬁg.2)

Use the table to choose a suitable comb size. Please

note that this guide is based on 80gsm paper.

The sheet capacity of combs will vary depending

on the type and thickness of the cover sheets you

have chosen. If in doubt select the next comb up in

capacity.

3

Load comb onto machine (ﬁg.3)

Insert the binding comb next to the white positional

arrow on the machine, behind the metal comb

support ﬁngers, with the open side of the comb

pointing upwards.

Note: If using GBC ProCombs™ the white arrow on

your comb should align to the white arrow on the

machine.

4

Open comb by turning lever towards you (ﬁg.4)

The coloured arrows adjacent to the opening comb

act as a guide as to how far to open in order to allow

punched sheets to be easily inserted.

Note: If using GBC ProCombs™ the coloured line

on your comb should align to the coloured arrows on

the machine for faster binding.

5

Select document size (ﬁg.5)

Rotate the edge guide to the paper / cover size

you wish to bind; A4 (297mm x 210mm) or Letter

(215mm x 279mm). When using oversized covers,

rotate the edge guide to the oversize position, punch

the covers for your document and set aside. Then

rotate the edge guide to select either A4 or Letter

and proceed.

6

Load pages into slot (ﬁg.6)

You can punch 1 cover sheet (0.2mm) or up to

12 sheets of paper (80gsm) at a time. Select the

quantity of sheets to punch and tap the edge of the

sheet stack against a ﬂat surface to ensure that all

sheets are aligned. Push the side of the stack to be

punched into the punching slot as far as it will go,

and slide left to align with the edge guide.

7

Punch pages by pulling handle down (ﬁg.7)

Then lift the handle back to the vertical position and

remove the punched sheets. Note: To prevent jams

do not attempt to punch more than one cover sheet

at a time.

8

Combine pages with comb (ﬁg.8)

Remove the sheets from the punch slot and insert

onto the ﬁngers of the binding comb.

9

Repeat process as required

Repeat stages 6-8 until your document is fully

loaded on the comb.

J

Close (ﬁg.9)

Close comb and remove document.

Page is loading ...

ACCO Brands Europe

Oxford House

Oxford Road

Aylesbury HP21 8SZ

United Kingdom

www.accoeurope.com

Ref: C12/6820

Issue: 1 (05/10)

IRL

AUS

RUS

Service

LUX

CZ

LV

EST

LT

SK

UA

JPN

IND

PAK

BD

G ACCO Service Division

Hereward Rise, Halesowen, West Midlands, B62 8AN

Tel: 0845 658 6600, Fax: 0870 421 5576

www.acco.co.uk/service

F ACCO France

Service Aprés-Vente

Tel: 0820 872 356, Fax: 03 80 68 60 49

[email protected]

D ACCO Deutschland

Arnoldstrasse 5, 73614 Schorndorf, Germany

Tel: +49 7181/887-420, Fax: +49 7181/887-498

E ACCO Iberia SL

P Isaac Peral 19, 28820 Coslada (Madrid)

Tel: 91 669 9391, Fax: 91 672 07 11

I ACCO Brands Italia Srl

Via Pietro Nenni 13, Settimo Torinese (TO)

Tel: +39 011 896 11 11, Fax: +39 011 896 11 13

[email protected]

B ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas

Tel: 0800-73362, Fax: 02-4140784

[email protected], www.accobenelux.be

o ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas

Tel: 0800-21132, Fax: 02-4140784

[email protected], www.accobenelux.be

O ACCO Brands Benelux B.V.

Peppelkade 64, 3992AK Houten, Nederland/Les Pays-Bas

Tel: 030-6346060, Fax: 030-6346070

[email protected], www.accobenelux.nl

S ACCO Brands Nordic AB

c Makadamgatan 5, 254 64 Helsingborg, Sweden

N Tel: +46 42 38 36 00, Fax: +46 42 38 36 10

g [email protected]

o

XERTEC a.s.

o U Továren, 770/1b, 102 00, Praha 10, Ceska Republika

Tel: +420 271 741 800, Fax: +420 271 743 143

www.xertec.cz

Q SERWIS ACCO

05-300 Mińsk Mazowiecki, Ul. Grobelnego 4, Polska

Tel: +48 25 758 11 90, Fax: +48 25 758 11 90

H ACCO Hungária Kft

Budapest, Ócsai út 4., 1239, Hungária

Tel: +36 1 283 1645, Fax: +36 0 283 0928

o

Представительствокомпании

«АККОДойчландГМБХиКО.КГ»

Россия 105005, Москва, Денисовский пер., д.26

Тел: (495) 933-51-63, Факс: (495) 933-51-64

o

«Полиграфическиесистемы»

ул. Набережно-Корчеватская, 78, г. Киев, 03035, Украина

Тел.: (+38) 044 252-7103, (+38) 044 252-7104

o ACCO Australia Pty Ltd

Level 2, 8 Lord Street, Botany, NSW, Australia 2019

Tel: +61 2 9700 0180, Fax: +61 2 9700 0195

[email protected]

A ACCO Österreich

Sallmann Bürotechnik GmbH, Schumacherstr.13, 5020 Salzburg

Tel: 0662 4345 160, Fax: 0662 4345 164

[email protected]

C ACCO Schweiz

ABC Bürotechnik AG, Winkelbüel 4, 6043 Adligenswil

Tel: 041 375 6060, Fax: 041 375 6061

[email protected]

o ACCO-Rexel Ltd

Clonshaugh Business & Technology Park, Clonshaugh, Dublin 17, Ireland

Tel: 01 816 4300, Fax: 01 816 4302

[email protected], www.accorexel.ie

Z Rexel Ofﬁce Products (PTY) Ltd

Crusher Road, Crown Ext.3, PO Box 102,

Crown Mines, Johannesburg 2025, South Africa

Tel: +27 (0) 11 837 7723

[email protected]

o GBC Asia Pte Ltd

o 47 Ayer Rajah Crescent, #05-08/17, Singapore 139947

o Tel: +65 6776 0195, Fax: +65 6779 1041

[email protected]

o GBC-Japan K.K.

14F Harmony Tower, 1-32-2 Honcho, Nakano-ku, Tokyo 164-8721

Tel: (81)-03-5351-1801, Fax: (81)-03-5351-1831

[email protected], www.gbc-japan.co.jp

GBC 4400310 User manual

GBC 4400310 User manual

in other languages

Related papers

Other documents