3 Product Introduction
Main Specs.
Bluetooth V2.0
Compatible with iOS and Android systems
Operational distance: 10M.
Color: black
Working frequency: 2.4GHz
Working current: 1mA
Working temperature: -10℃ to 55℃
Working voltage: 3V-4.2V
Working humidity: 10%-70%
Battery type: 80mAh lithium battery.
Charging time: About 1 hour
4 Operating Instructions
In order to access the full features of Tokio Selfie, please install Camera 360 in your
Smartphone through Google Play Store, and run Camera 360 to access the full
features of Tokio Selfie.
How to pair your phone with self timer?
1. Press the power button for 2 seconds to turn on the self timer, the green light will be
twinkled to enter the pairing mode.
2. Turn on the Bluetooth function on your smartphone and scan all available Bluetooth
devices, then find the Bluetooth device named “TOKIO”.
3. Then pair your smartphone with “TOKIO”, wait for about 8 seconds until green LED
light constantly flashed, this indicate the connection is successful.
4. Screw up your mobile phone on the phone holder.
5. Press CAMERA button to take photo.
6. Focus: Press “+” button to zoom in and “-“ button to zoom out (this function only works
for Samgsung mobile phone)
7. In order to make your smartphone fully compatible with Tokio Selfie stick, it is
suggested to download the Camera360 from Play Store or App Store, then run the
Camera360 in your smartphone to perform the selfie functions.
5 Sleeping mode:
1. When the device is idle for 5 minutes, the device will enter into sleeping mode and
disconnect Bluetooth automatically. Press the camera button shortly, the device will
connect with the previously connected smartphone automatically.
2. When your smartphone disconnects with Tokio selfie timer, you can also press the
camera button to make them connected automatically.