Sharp 28LF-94H Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
This manual is also suitable for
Please read this operation manual carefully
before using the colour television.
COLOUR TELEVISION
OPERATION MANUAL
Simple 100 Hz. TV
28LF-94H
32LF-94H
R
ENGLISH - 1 -
Contents
Teletext .................................................................... 17
To operate Teletext ........................................................ 17
To select a page of Teletext ........................................... 17
To Select Index Page ..................................................... 17
To Select Teletext with a TV Programme ....................... 17
Searching for a page while watching TV ........................ 17
To Select Double Height Text ......................................... 17
To Reveal concealed Information ................................ 17
To Stop Automatic Page Change ................................... 17
Split Screen ................................................................... 17
To Select a Subcode Page ............................................ 17
Fastext .......................................................................... 17
To exit Teletext ............................................................... 18
Connecting external equipment ........................... 18
Via the Euro connector .................................................. 18
RGB mode .................................................................... 18
S-VHS EXT2 Mode ....................................................... 18
Via the ANT (aerial) socket ............................................ 18
Via the RCA jacks .......................................................... 18
TV and Video Recoder (VCR) ....................................... 18
NTSC Playback ............................................................. 18
Copy Facility .................................................................. 18
To connect to S-VHS input ............................................ 18
Connecting Headphones ............................................... 18
Connecting external equipment ........................... 19
Typical Connections .............................................. 20
Typical Connections (Continued) ......................... 21
Typical Connections (Continued) ......................... 22
Typical Connections (Continued) ......................... 23
Typical Connections (Continued) ......................... 24
21-pin Euro-SCART and 21-pin Audio/Video ....... 25
Troubleshooting ..................................................... 26
Specifications ......................................................... 27
Important Instructions ........................................... 28
Dear SHARP Customer ............................................ 2
Safety Precautions ................................................... 3
Supplied Accessories .............................................. 5
Remote Control Buttons ......................................... 6
Control Panel Buttons ............................................. 7
Antenna Connections .............................................. 7
Preparation ............................................................... 8
Features .......................................................................... 8
Before Switching on your TV .................................. 8
Power connection ............................................................ 8
Aerial Connections .......................................................... 8
How to connect external equipment................................ 8
Remote Control Battery Installation ................................. 8
Switching the TV ON/OFF ....................................... 9
To switch the TV on ......................................................... 9
To switch the TV off ......................................................... 9
Initial Settings .......................................................... 9
Operating with the onset buttons ..................................... 9
Operating with Remote Control ....................................... 9
Menu System .......................................................... 10
Sound menu .................................................................. 10
Picture menu ................................................................. 11
Feature menu ................................................................ 13
Installation Menu ........................................................... 14
Other Features ....................................................... 16
Information On Screen .................................................. 16
Sound Mute ................................................................... 16
Sound Modes ................................................................ 16
Screen Format............................................................... 16
No-Signal Timer Indicator .............................................. 16
Still Picture ..................................................................... 16
To Display the Time ....................................................... 16
Flash back (
) ............................................................ 16
Double-digit (- / - -) ........................................................ 16
AV Modes ...................................................................... 16
ENGLISH - 2 -
Dear SHARP Customer
Congratulations! You are now the proud owner of a SHARP Colour Television Receiver. To ensure proper operation, please
read this manual carefully. After reading, keep this manual in a safe place for future reference.
TERMS OF GUARANTEE
Subject to the conditions listed below Sharp Electronics (U.K.) Ltd. (Hereinafter called «the Company») guarantee
to provide for the repair of, or at its option replace the Sharp Equipment, or any component thereof, (other than
Batteries), which is faulty or below standard, as a result of inferior workmanship or materials.
The conditions of the guarantee are:
1. This guarantee shall only apply to defects or faults which are notified to the Company, or its approved Service
Facility within one year from the date of purchase of the equipment.
2. This guarantee covers equipment intended for private domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or profession.
3. This guarantee does not cover any faults or defects caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at adjustment or repair other than by an approved Service Facility.
4. In the unlikely event of that your equipment should require repair, please contact the dealer or supplier from whom
it was purchased.
5. The cost of carriage to and from the Dealer, Supplier or Sharp approved Service Facility shall be borne by the
purchaser.
6. No person has any authority to vary the terms or conditions of this guarantee.
7. This guarantee is offered as an additional benefit to the consumers statutory rights and does not affect rights
in any way.
In the unlikely event of this equipment requiring repair during the guarantee period, you will need to provide proof of date
of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the time of purchase.
ENGLISH - 3 -
Safety Precautions
This equipment complies with the requirements of Direc-
tives 89/336/EEC, 92/31/EEC and 73/23/EEC as amended
by 93/68/EEC.
This receiver should only be operated from a 220-240V AC,
50 Hz outlet. Ensure you select the correct voltage setting
for your convenience.
To prevent fire or electrical shock, do not use the TV set in
an excessively damp place.
Position the TV set out of direct sunlight and away from
heat, as high temperatures can damage the cabinet, CRT,
or other electronic parts.
Do not cover ventilation slots with objects such as newspa-
pers, tablecloths, curtains, etc.
Do not cover the ventilation holes at the back of the TV set,
this can cause fire or other serious problems. Leave an ade-
quate open space behind the TV set for good ventilation.
In order to ensure that the television is properly ventilated,
leave a space of at least 10 cm around the set.
Do not install this equipment in a confined space such as a
bookcase or a built-in cabinet.
Television equipment and cart combination should be
moved with care. Quick stops, excessive force, and uneven
surfaces may cause the equipment and cart combination to
overturn.
To prevent electrical shock, do not subject the AC power
cord to damage by bending or twisting it, or by placing
heavy items on top of it and do not place the AC power cord
under the TV set. If the AC power cord becomes damaged,
unplug it from the wall outlet immediately and call your deal-
er for service.
Do not place this television equipment on an unstable cart,
stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to
the equipment.
Use only with a cart or stand recommended by the manu-
facturer, or sold with the television equipment.
Never remove the back of the cabinet, as there is high volt-
age in the TV set.
Please call for service.
When replacement parts are required, be sure the service
technician has used replacement parts which are specified
by the manufacturer or have the same specifications as the
original one. Unauthorized substitutions may result in fire,
electrical shock, or other hazards.
ENGLISH - 4 -
Unplug the power cord from the wall outlet immediately if
the TV set begins to make unusual noises or give off smoke
or an odd smell, then call your dealer for service.
Always disconnect your television from the mains and the
aerial cables during thunderstorms.
Even if your television is switched off, it can still be dam-
aged by lightning striking the mains and/or aerial cable.
Do not leave your TV set in Stand-by or operating mode when
you leave the house.
In order to prevent electrical shocks and fires, ensure that
the television is not subjected to splashes or spills of wa-
ter, and avoid inserting objects or pouring any type of liquid
into the set.
To prevent fire, never place any type of candle or naked
flames on the top or near the TV set.
If an object or liquid enters the set, disconnect the mains
supply and contact technical service.
Wall or shelf mounting should follow the manufacturers in-
structions, and should use a mounting kit approved by the
manufacturer.
Do place the TV set onto an even stand, table or track which
size is bigger than the TV set.
If the TV set is put onto a smaller size or uneven stand, ta-
ble or track may cause the TV cabinet distort. Do not put or
insert anything between TV set and the stand, table or track.
The tube of your TV has a special coating. Do not knock or
rub on the tube face with sharp or hard surfaces, otherwise
you will damage the coating.
To prevent damaging the surface of the television screen,
remove finger prints only with a soft cloth dampened with
glass
cleaner. Do not use any abrasive cleaners.
Do not use thinner, benzene or other strong chemical clean-
ers.
Warning!
Any intervention contrary to regulations, in particular,
any modification of high voltage or a replacement of
the picture tube may lead to an increased concentra-
tion of x-rays. Any television modified in this way no
longer complies with license and must not be operated.
Instructions for waste disposal:
Packaging and packaging aids are recyclable and
should principally be recycled. Packaging materials,
such as foil bag, must be kept away from children.
Batteries, including those which are heavy metal-free,
should not be disposed of with household waste.
Please dispose of used batteries in an environmentally
sound manner. Find out about the legal regulations
which apply in your area.
CAUTION: For environmental and safety reasons, it is recommended that this television set is not left in stand-by
mode whilst not in use. Switch it off using the main switch. During periods of absence from home it is also
wise to disconnect the set by unplugging the mains plug.
ENGLISH - 5 -
Supplied Accessories
5HPRWHFRQWURO
2SHUDWLRQ0DQXDO
6LPSOH+]79
/)+
/)+
5HVSHFWWKH
HQYLURQPHQWDQG
SXWXVHGEDWWHULHV
LQDFRQWDLQHUWKDWLV
HVSHFLDOO\GHVLJQHG
IRUWKLVSXUSRVH
/)+
/)+
48,&.
67$57
*8,'(
7\SLFD O&RQQHFWLRQV 4XLFN6WDUW*XLGH
7\SLFDO&RQQHFWLR QV/)+
ENGLISH - 6 -
Remote Control Buttons
CAUTION
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock of persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the appliance.
= Stand By
= Cursor Up
= Cursor Right
OK = Store / Still Picture
= Info (Program Table)
0 - 9 = Direct Program
- / - - = Double Digit
= Screen Format button
P/CH+ = Program Up
+ = Volume Up
= TV / Quit Menu
= EXT button (EXT-1, EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV)
Yellow = Feature Menu
Blue = Installation Menu
= Hold
= Update
= Index Page
= Reveal
= Expand
= Mix
= Teletext
= Time
Red = Sound Menu
Green = Picture Menu
= Mute
I-II = Mono/Stereo - Dual I-II
- = Volume Down
- P/CH = Program Down
= Flash back button
M = Menu
= Cursor Down
= Cursor Left
ENGLISH - 7 -
Control Panel Buttons
Antenna Connections
VIDEO
AUDIO L (L/S/G/I) = Audio left
AUDIO R (R/D/D/D) = Audio right
= Headphone 3,6 mm Ø
Speakers (left + right)
= Power On / Off
= Volume -/+
CH = Program -/+
S-VIDEO
FRONT PANEL
ENGLISH - 8 -
Preparation
Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all
around the set. To prevent any fault and unsafe situations,
please do not place any objects on top of the set.
Use this apparatus in tropical and moderate climates.
Features
Remote Control Color Television
100 UHF / VHF / Cable channel presets
Cable Channel Compatible
Menu Driven functions
2 Euro connector Sockets
Front AV sockets
Front S-VHS connector
Digital Stereo NICAM
Full function teletext (Fastext)
Direct Channel access
APS (Automatic Programming system) Tuning
Program custom name feature
Automatic search tuning
Sleep Timer
Child lock
Blue mute on no video signals
Auto switch off after 5 mins of no signal
WSS (wide screen signal decoding)
NTSC playback
Headphone
Split Screen (Picture and Text)
CTI (Color Transient Improvement)
Automatic VCR detection
Simple 100 Hz.
Before Switching on your TV
Power connection
Important: The TV set is designed to operate on 220-240V
AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the mains.
Aerial Connections
Connect the aerial plug to the aerial input socket located at
the back of the TV.
How to connect external equipment
See Connecting external equipment on page 19.
See the instruction manuals provided with the external de-
vices too.
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied
dry batteries in the remote control.
1. With your thumb nail, pull up the slit as indicated by the
arrow to remove the battery cover.
2. Insert two batteries 1.5 V (R03 AAA size). Be sure to
match the battery +/- terminals with the +/- marks inside
the compartment.
3. Replace the battery cover.
Notes:
Remove batteries if weak or if the unit is not in use for long
periods.
Do not mix old and new batteries.
Incorrect installation of the batteries may damage the re-
mote control.
ENGLISH - 9 -
Switching the TV ON/OFF
You can operate your TV either using the remote con-
trol handset or directly using the TV onset buttons.
To switch the TV on
Your TV will switch on in two steps:
1- Press the power button located on the front of the TV.
Then the TV switches itself to standby mode and the
RED LED located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button or stand-by button on the remote control
so that a programme number is selected,
or,
Press Power Button and P/CH+ or -P/CH buttons on the
TV or on the remote control respectively, so the TV will
switch on and the RED Led will turn GREEN.
To switch the TV off
Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED, or,
Press the power button located on the front of the TV.
Initial Settings
The message PLEASE CHECK ANTENNA CABLE! will
be displayed when you turn on your TV for the first time.
Note: If you connect Video Recorder to your TV via antenna
input (ANT socket); totune the VCR channel automaticallyyou
must set the VCR in play mode before you start APS. (Please
use a PAL / SECAM Video Cassette).
1- Select LANGUAGE with
or button, then press
the
or button to select a menu language.
2- Select COUNTRY with
or button, then press the
or button to select the correct country.
3- Select START with
or button, then press the
button to start APS.
APS, (Automatic Programming System) automatically pro-
grammes the received channels in your TVs programme
numbers. During APS, APS IS RUNNING PLEASE WAIT
message will be displayed. After APS is finalized, the PRO-
GRAM TABLE appears.
To cancel APS, press the
button.
Moving cursor to four direction you can reach 30 pro-
grammes in the same page. By scrolling the pages up or
down by pressing the navigation buttons you can select all
the programmes.
By cursor action, programme selection is done automatical-
ly.
Programme Number is between 1 and 99. Programme
Name has a name string with 5 characters. After autostore
process the Programme Names are set to:
Channel search "C-01" or "S-01" (band and channel num-
ber) or name of the tuned channel if defined.
Change:
This function is used to change the places of the pro-
grammes in Program Table. Select the programme you
want to move and press BLUE button. Selected programme
will be highlighted. Move the cursor to desired program
place and press BLUE button again.
Delete:
Select the programme you want to delete and press RED
button. The programme will be deleted from the Program
Table without any warning.
"delete" string becomes green while the selected channel
is being deleted from the Program Table.
Press
or button to exit Program Table.
Operating with the onset buttons
Volume setting and programme selection can be made us-
ing the buttons on the front of the TV.
Volume Setting:
Press
button to decrease volume or button
to increase volume, so a volume level scale will be dis-
played on the screen.
Programme Selecting:
Press CH button to select next programme or CH
button to select the previous programme.
Operating with Remote Control
The remote control handset of your TV is designed to control all
the functions of the model you selected. The functions will be de-
scribed in accordance with the menu system of your TV.
Functions which you can use out of menu system are de-
scribed below.
ENGLISH - 10 -
Volume Setting:
Press
+ button to increase volume.
Press -
button to decrease volume.
Programme Selecting (Previous or next programme):
Press -P/CH button to select the previous programme.
Press P/CH+ button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
program after a short delay.
For a two digit program number press - / - - button. Press
the first digit and then second digit of the programme
channel you want to watch.
Menu System
Your TV has been designed with a menu system to provide
an easy manipulation of a multifunction system. "M" button
has two functions. The first function of it is open and close
the menu, the second function is closing the submenu and
then opening its parent menu. The short way in order to en-
ter the menus, press:
M button Menu
Red button Sound menu
Green button Picture menu
Yellow button Feature menu
Blue button Installation menu
button Program Table
When you press "M" button, the following menu appears on
the screen.
Press or button to select a menu title and then
or OK button to enter the menu.
Sound menu
First icon belongs to the sound menu. By pressing or
OK button, Sound menu appears on the screen.
You can enter Sound menu directly by pressing RED button.
Volume
When you entered the sound menu Volume will be the first
selected item. Press
button to increase volume level.
Press
button to decrease volume level.
Balance
By pressing or button, select Balance. Press
button to move headphone balance rightward. Press
but-
ton to move headphone balance leftward.
Sound Mode
By pressing or button, select Sound Mode. You can
change the sound mode to MONO, STEREO (NICAM STE-
REO), DUAL 1 (NICAM 1) or DUAL 2 (NICAM 2) by press-
ing
or button.
ENGLISH - 11 -
Surround Mode
By pressing or button, select Surround Mode. You
can change the surround mode to *INCR. STEREO, INCR.
MONO or OFF by pressing
or button.
* INCR.: Incredible
Bass
By pressing or button, select Bass. Press but-
ton to increase Bass level. Press
button to decrease
Bass level.
Treble
By pressing or button, select Treble. Press but-
ton to increase Treble level. Press
button to decrease
Treble level.
Headphone Menu
By pressing or button, select Headphone. Press
button to enter Headphone menu.
Volume
By pressing
or button, select Volume. Press
button to increase headphone volume level. Press
but-
ton to decrease headphone volume level.
Balance
By pressing or button, select Balance. Press
button to move headphone balance rightward. Press
but-
ton to move headphone balance leftward.
Sound Mode
By pressing
or button, select Sound Mode. You can
change the sound mode to MONO, STEREO (NICAM STE-
REO), DUAL 1 (NICAM 1) or DUAL 2 (NICAM 2) by press-
ing
or button.
AVL
Automatic Volume Limiting (AVL) function normalizes sound
to obtain fixed output level between programs, having differ-
ent sound levels. Pressing
or button will turn ON or
OFF this feature.
To Store the Settings
Press OK button to store Sound menu settings.
STORED will be displayed at the bottom of the menu.
Picture menu
By pressing or button, select the second icon.
By pressing or OK button, Picture menu appears on
the screen.
You can enter Picture menu directly by pressing GREEN
button.
Setting Brightness
When you entered the Picture menu Brightness will be the
first selected item. Press
button to increase Brightness
level. Press
button to decrease Brightness level.
Setting Contrast
Using or button select Contrast.
Press
button to increase contrast level.
Press
button to decrease contrast level.
ENGLISH - 12 -
Setting Color
Using or button select Color.
Press
button to increase color level.
Press
button to decrease color level.
Setting Sharpness
Using or button select Sharpness.
Press
button to increase sharpness level.
Press
button to decrease sharpness level.
Setting Tilt
Using or button select Tilt.
Press
button to increase tilt level.
Press
button to decrease tilt level.
Setting Tint
This item is used to change the Colour Temperature. By
pressing
or button you may select one of these op-
tions: COOL, WARM, NORMAL.
Setting Hue (In AV mode only)
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
Using
or button select Hue.
Press
button to increase hue level.
Press
button to decrease hue level.
Screen Format
By pressing or button, select Screen Format. You
can change the screen format to AUTO, NORMAL, FULL,
14:9, CINEMA, PANORAMA or SUBTITLE by pressing
or
button.
Screen Format can be set by button also.
If
button is pressed once, Screen Format indicator ap-
pears on the screen.
Each time you press the
button, the width of the pic-
ture changes as indicated:
When you select 14:9, CINEMA, PANO or SUBTIT you can
change the vertical scroll by pressing
/ .
* Auto mode (WSS data): The WSS data is sent by some
broadcasting stations with information of the original size.
When the TV is in AUTO mode and receives the WSS
data, it changes the size automatically as indicated below:
When the TV is receiving WSS data 16:9 the TV selects
CINEMA automatically.
When the TV is receiving WSS data 14:9 the TV selects
14:9 automatically.
When the TV is receiving WSS data 4:3 the TV selects
NORMAL automatically.
When the TV does NOT receive WSS data the TV selects
FULL automatically.
External source: When you are watching the TV set
through the Euro-SCART EXT.1 terminal and it receives in-
formation of 16:9 format (through the audio-video control
pin) the TV selects FULL automatically.
ENGLISH - 13 -
Screen Format (Special detail information)
Special detail information about AUTO, NORMAL, FULL,
14:9, CINEMA, PANORAMA and SUBTITLE.
NORMAL
You can watch 4:3 programs in 4:3 format by switching to
NORMAL Mode function.
FULL
With Full Mode you adapt the picture 16:9 format while also
stretching the centre of view. This is an advantage, for ex-
ample, when watching sports games where there is no real
fixed centre of the picture.
14:9 ( )
Adapts the 14:9 broadcast cinema movies to the 14:9 Mode.
CINEMA ( )
Adapts the 16:9 broadcast cinema movies to the 16:9 Mode,
thereby getting rid of the black borders.
PANORAMIC ( )
This stretches the left and right sides of a normal picture
(4:3 aspect ratio) to fill the screen, without making the pic-
ture appear unnatural.
The top and bottom of the picture are slightly cut off.
SUBTITLE (
)
Adapts up to the wide picture (16:9 aspect ratio) with subtitle
to the full screen.
Adjusting the visible area of the picture:
If subtitles or the top (or bottom) of the picture are cut off,
you can adjust the visible area of the picture manually.
1. Press
button once.
The SCREEN FORMAT indicator appears. The SCREEN
FORMAT will not be changed.
2. While it is displayed, press
or to change the po-
sition of the picture.
You cannot adjust the visible area in NORMAL or FULL
mode.
Picture Smart
By pressing or button, select Picture Smart. You
can change the picture smart to PERSONAL, RICH, NATU-
RAL or SOFT by pressing
or button.
To Store the Settings
Press OK button to store Picture menu settings.
STORED will be displayed at the bottom of the menu.
Feature menu
By pressing or button select the third icon.
By pressing or OK button, Feature menu appears on
the screen.
You can enter Feature menu directly by pressing YELLOW
button.
Sleep Timer
As you enter the Feature menu, Sleep Timer will be the first
selected option. Use
or button to change the Sleep
ENGLISH - 14 -
Timer values between OFF, 15 MIN, 30 MIN, 45 MIN, 60
MIN, 90 MIN, 120 MIN, 150 MIN and 180 MIN.
If sleep timer is activated, at the end of the selected the
time, the TV goes automatically to stand-by mode.
Child Lock
You can use this feature to prevent children turning on TV or
changing programs or adjustments etc. without remote con-
trol.
The Child Lock feature can be set by
or button to
either ON or OFF. When OFF is selected, there will be no
difference in the operation of your TV. When ON is selected,
the TV can only be controlled by the remote control handset.
In this case, the front panel buttons (except the Power On/
Off button) will not work.
While the CHILD LOCK is ON, pressing any of the front/
right panel buttons (except Power on/off button) causes the
warning menu to appear on the middle of the screen.
&+,/'/2&.
Blue Screen
In case, no valid signal is detected (in TV or AV mode) Blue
Screen is activated. During search process Blue Screen is
not active.
The Blue Screen feature can be set by
or button to
either ON or OFF.
EXT2 Output
You can use this menu to select the internal or external
source that will be output at EXT.2 terminal.
In the Feature menu select EXT2 Output using
or
button. Then select the source you want to be output
at EXT.2 pressing
or button (one of the sources:
TV, EXT-1, FRONT-AV or SCREEN.
To Store the Settings
All settings are stored automatically in Feature menu.
There is no need to press OK button.
Installation Menu
By pressing or button, select the fourth icon.
By pressing or OK button, Installation menu appears
on the screen. You can enter installation menu directly by
pressing BLUE button.
Language
By pressing or button, select Language. You can
select the language by pressing
or button.
Country
By pressing or button, select Country. You can se-
lect the country by pressing
or button.
Txt Language
By pressing or button, select Txt Language. You
can select the Teletext Language by pressing
or
button. The options are WEST EUROPE, EAST EUROPE,
GREEK - TURKEY and RUSSIAN.
Programming
By pressing or button, select Programming. You
can enter the programming menu by pressing
button.
ENGLISH - 15 -
Program
By pressing
or button, select Program. By pressing
/ or digit buttons, you can select the program num-
ber. There are 100 program storage between 0 and 99.
Color Norm
By pressing
or button, select Color norm. By press-
ing
or button, you can change the standard to
AUTO or PAL.
Standard
The "Standard" setting is fixed to "I". You cannot change
this item's setting.
Search
By pressing or button, select Search. By pressing
button, you can enter Search menu.
If you can not tune to a channel, try APS.
Search
By pressing
or button, select Search. By pressing
button, you can start Search. When you start the chan-
nel searching SEARCHING is written and when a chan-
nel was found which has been searched, FOUND is writ-
ten across the SEARCH item in the menu above.
When word FOUND it appears, is not possible to select
CHANNEL or BAND by pressing the
or button.
Press M button to select these items.
Channel
By pressing
or button, select Channel. By pressing
/ or digit buttons, you can change the channel num-
ber.
Band
By pressing
or button, select Band. By pressing
or button, you can change the Band to C or S.
To Store the Settings
Press OK button to store Search menu settings.
STORED will be displayed.
To exit the Search menu, press M button.
Fine Tuning
By pressing or button, select Fine Tuning. By
pressing
or button, you can fine tune the program
manually.
Name
By pressing or button in Programming menu, se-
lect Name. You can change the program name. When you
select the Name, cursor is on the first letter. By using
or
buttons you can select the letter. By pressing or
button, you can move the cursor to second or third letter
of the program name. Name can be 5 digit length.
To Store the Settings
Press OK button to store Programming menu settings.
STORED will be displayed at the bottom of the menu.
Press M button to exit programming menu.
Execution APS:
By pressing or button, select Execution APS in In-
stallation menu. By pressing
button, you can enter Exe-
cution APS menu.
If you want to cancel APS, press button, you return to
Installation menu. If OK button is pressed, APS function
starts and the following menu comes to the screen.
After APS is completed, the PROGRAM TABLE is dis-
played.
Press or button to exit Program Table.
Note: To enter PROGRAMME TABLE directly, press
button.
See Page 9 Program Table explanation.
ENGLISH - 16 -
Other Features
Information On Screen
Programme Number, Programme Name (or AV) and
Sound Indicator are displayed on the upper right of the
screen. They are displayed after programme change for 3
seconds.
Programme Number and
Programme Name (5 characters)
, , Sound Indicator (Mono, Stereo, Dual)
The alternatives of Sound Indicator are Mono, Stereo, Dual
which shows the current sound mode.
Programme Number, Programme Name and Sound Indica-
tor OSD s are displayed when a new programme is entered
by pressing digit or "- / - -" button, "
" button, "P/CH+" or
"-P/CH" button.
Sleep Timer Indicator (If activated)
Screen format Indicator
Sleep Timer and Screen format indicators are displayed with
Programme Number, Programme Name and Sound Indica-
tor by pressing "
" button.
Sleep Timer Indicator shows the time left if enabled.
Sound Mute
To cut off the sound from the TV press button. To restore
the sound press the
button again or use the + or
-
buttons, in this case the volume will start from minimum
setting.
Sound Modes
This is a stereo option. The alternatives of Sound Modes
are Mono, Stereo, Dual 1 and Dual 2. This indicator is dis-
played in the lower middle side of the screen. "I-II" button is
used to select Mono, Stereo, Dual 1 or Dual 2.
In Mono broadcast or in forced-mono (for stereo broadcast).
In Stereo broadcast.
If dual broadcast detected. Dual 1 is selected in default and
also can be selected after Dual 2 by Remote Control.
If Dual 2 selected by Remote Control.
Screen Format
The picture mode OSD is displayed below the sound indica-
tor, by TV Status OSDs. According to the WSS data, inside
of the OSD box AUTO, NORMAL, FULL, 14:9, CINEMA,
PANORAMA or SUBTITLE is written.
By pressing
button (if Teletext is not active) the picture
mode can be switched into AUTO, NORMAL, FULL, 14:9,
CINEMA, PANORAMA or SUBTITLE Mode.
No-Signal Timer Indicator
It is displayed in the middle of the screen when no valid sig-
nal detected. It shows the remained time for the switching to
the Stand-By mode (it will take 5 minutes). The indicator is
displayed in 3 seconds when there is no valid signal.
After a Remote Control command (if No-Signal Timer is ac-
tive) the timer stops and if no signal detected again the tim-
er is initialized to 5 minutes and starts 3 seconds later again
to count down.
Still Picture
Pressing OK button makes the picture on the screen fro-
zen. Pressing this button again enables moving pictures
again.
To Display the Time
While watching a TV programme with Teletext transmis-
sion press
button. The current time information, cap-
tured from Teletext will be displayed at the upper right cor-
ner of the screen.
If the programme being watched does not have Teletext
transmission, no time information will be displayed.
The time information will disappear after pressing
button again.
Flash back ( )
This button is used to return to the previous viewed preset.
By pressing the "
" button repeatedly it is possible to tog-
gle between two presets.
Double-digit (- / - -)
This OSD is displayed when the "- / - -" button pressed in
place of the programme number indicator.
After then, in order to enter a programme it must be pressed
to two digit consecutively. When it is late to press any digit
button this function will be ignored and the display will be
erased. In the same way it must not be late to press any dig-
it button after entering the first digit. The limit of the delay
time is 3 seconds.
AV Modes
By pressing the button you can switch your TV to AV
modes (except being in Teletext). Pressing this button will
switch the TV in one of the optional AV modes: EXT-1,
EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV. EXT.1 supports
the RGB mode and EXT.2 supports S-VHS EXT2 mode un-
less there is an S-VHS socket..
In order to quit the AV mode press the
, digit buttons or
P/CH+ / -P/CH button.
ENGLISH - 17 -
Teletext
Teletext is an information system that displays text on your
TV screen. Using the Teletext information system you can
view a page of information on a subject that is available in
the list of contents (index).
No on screen display will be available in text mode.
No contrast, brightness or colour control, but volume control
is available in text mode.
To operate Teletext
Select a TV station on which Teletext is being transmitted.
Press (TELETEXT)
button. Usually the list of contents
(index) is displayed on the screen.
To select a page of Teletext
Press the appropriate digit buttons for the required Teletext
page number.
The selected page number is displayed at the top left corner
of the screen. The Teletext page counter searches until the
selected page number is located, so that the desired page is
displayed on the screen.
Press P/CH+ button to move the Teletext screen forward
one page at a time.
Press -P/CH button to move the Teletext screen back-
ward one page at a time.
To Select Index Page
To select the page number of the index (generally page
100), press button.
To Select Teletext with a TV Programme
Press button. The text is now superimposed over the
programme on the screen.
Press button again to return to the Teletext page.
Searching for a page while watching TV
To search for a specific page whilst viewing the TV picture,
whilst viewing teletext enter the desired Page number,
thenpress the
button will restore the TV picture. Once
the desired page is found the Header of this page will ap-
pear on the screen. Press the
button to view the full
page.
To Select Double Height Text
Press button for the top half of the information page
to be displayed in double height text.
Press
button again for the bottom half of the informa-
tion page to be displayed in double height text.
Press
button once more for the full page of normal
height text.
To Reveal concealed Information
Pressing button once will reveal answers on a quiz or
games page.
Pressing
button again will conceal the revealed an-
swers.
To Stop Automatic Page Change
The teletext page you have selected may contain more in-
formation than can be displayed on one screen, in such cas-
es the page will update periodically.
Press
button to stop the automatic page change.
Press
button again to allow the next page to be dis-
played.
Split Screen
To watch a TV programme and teletext at the same time
on the screen this function is used.
While watching a TV programme with teletext transmission
press
button.
Teletext is displayed on the screen. Press
button
again. The screen is divided into two parts. TV program is
displayed on the left side of the screen. Teletext is dis-
played on the right side of the screen.
To exit split screen press
button one more time.
To Select a Subcode Page
Subcode pages are subsections of long teletext pages that
can only be displayed on the screen one section at a time.
Select the required teletext page.
Press
button. number / - - will be displayed on the
left top corner of the screen.
Select the required subcode page number by pressing 2
digit buttons. (e.g. 0 5)
You can go to other subcode pages by pressing or
buttons or,
After number / - - displayed, you can simply press
button again to update the subcode pages automatically.
Fastext
Teletext mode will be selected according to transmission au-
tomatically.
Your TV supports the 10 page Teletext system. When the
page number of any of the 10 pages in memory is entered,
the system will not search for the requested page; instead it
will display the page automatically.
Press
button to move the Teletext screen forward one
page at a time.
ENGLISH - 18 -
Press
button to move the Teletext screen backward
one page at a time.
For Fastext
The subject-heading for the information may have a particu-
lar colour or can be in a form located in a coloured box.
Press an appropriate RED, GREEN, YELLOW or BLUE
button in order to reach the relevant page quickly.
To exit Teletext
Press button. The screen will switch to TV mode.
Connecting external equipment
Via the Euro connector
Your TV set has two euro connector sockets. If you wish to
connect external equipment (e.g. video recorder, decoder,
etc.) which have Euro connectors, to your TV, use the EXT.1
(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euro connector sock-
ets the TV will be switched to AV mode automatically.
RGB mode
If a piece of equipment outputs RGB signals use the EXT-1
Euro connector as this is RGB ready.
S-VHS EXT2 Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting S-VHS EXT2 mode and connecting
your equipment to the EXT.2 (S-VHS EXT2) terminal of TV.
See your equipment's booklet to check if your equipment
has such feature.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
To store the test signal that comes from the equipment,
see Installation Menu on page 14 and store it to the
programme number 0. You can watch images from that
equipment to select the programme number which you
stored the test signal.
Via the RCA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the FRONT-AV terminal with
the video and audio cables.
If the equipment has the mono audio jack, connect it to the
AUDIO-L jack.
TV and Video Recoder (VCR)
Connect the Video Recorder to the ANT (antenna input)
socket of the TV with the aerial cable.
Connect the Video Recorder to the EXT.1 or EXT.2 termi-
nal with the SCART cable, or connect it to the FRONT-AV
terminal with the audio and video cables.
VCR is detected automatically.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press
button to select the corresponding AV mode.
NTSC 3.58/4.43 system is detected automatically in AV
mode.
Copy Facility
You can output the video and audio signals which inputs
from TV, EXT.1 (EXT-1), FRONT-AV or SCREEN to the vid-
eo recorder connected to the EXT.2 (EXT-2) terminal.
To select the output source, see EXT2 Output on page
14.
To connect to S-VHS input
Connect your camera or camcorder at the front or back side
of your TV.
Connect your equipment to the TV via S-VHS input and
audio inputs of FRONT-AV inputs by using S-VHS cables.
Connecting Headphones
Use the stereo headphone socket on the lower front side of
your TV, to connect headphones.
ENGLISH - 19 -
Connecting external equipment
Before connecting anything
Switch off all equipment.
Read the manuals provided with the equipments.
To select an AV mode
Pressing
button on the remote control selects one of AV modes (EXT-1, EXT-2, S-VHS, S-VHS EXT2 or FRONT-AV)
To return to the TV mode, repeatedly press
button.
EXT.1 (EXT-1) terminal: Euroconnector (21-pin, SCART)
Video input, Audio L/R inputs and RGB inputs are available.
TV broadcast outputs (Video and Audio L/R) are available.
EXT.2 (EXT-2) terminal: Euroconnector (21-pin, SCART)
Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.
Video and Audio L/R outputs are available. (see EXT2 Output on page 14.)
FRONT-AV terminal: RCA connectors x 3
Video input and Audio L/R inputs are available.
S-VHS terminal:
S-VIDEO (Y/C) input.
Do not use S-VHS and FRONT-AV inputs at the same time even if those options available in the set.
$QWHQQD (;7
(;7
DECODER
FOR SATELLITE RECEIVER
VIDEO
HEADPHONE
AUDIO
CAMERA
9LGHR,QSXW
7HUPLQDO
$XGLR,QSXW
7HUPLQDO
)5217$9
+HDGSKRQH
69+6
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Sharp 28LF-94H Operating instructions
- Category
- LCD TVs
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
JVC AV29BF10EPS User manual
-
JVC AV21BT70EP User manual
-
-
-
-
-
Hitachi C15F27 Instructions For Use Manual
-
-
Technicolor - Thomson 14MS15UT User manual
-