Groupe Brandt DRH915JE Owner's manual

LES NOUVEAUX OBJETS DE VALEUR

200382791

FR GUIDE D’INSTALLATION & D’UTILISATION

EN INSTRUCTIONS FOR USE

NL GEBRUIKSAANWIJZING

DE BEDIENUNGSANLEITUNG

Réfrigérateur à intégrer

Integrated Refrigerator

Ijkast

Kühlschrank

DRH 914 JE

Page is loading ...

18

3 Collez les baguettes couvre-joint (E).

4. Mettez en place

5. Vissez l’appareil.

GF1MERA

PL09

FAL3MERA

6. Mettez en place les caches (L) des vis.

7. Montez le kit de décoration.

8. Posez la poignée.

PL13

PL12

SAB1ME

Page is loading ...

20

Instructions for the use of the instructions booklet

Notes which are important for your safety or for the proper functioning of the

appliance

Supplementary information regarding operation and practical applications of the

appliance.

Tips and notes concerning economical and environmentally sound use of the

appliance

The symbol on the product or on its packaging indicates that this product may not

be treated as household waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and electronic equipment. By

ensuring this product is disposed of correctly, you will help prevent potential neg-

ative consequences for the environment and human health, which could other-

wise be caused by inappropriate waste handling of this product. For more

detailed information about recycling of this product, please contact your local

city office, your household waste disposal service or the shop where you pur-

chased the product.

Safety Instructions.............................................................................................21

Disposal ..........................................................................................................22

Use and Control / Before Use.............................................................................23

Starting the appliance .......................................................................................23

Temperature control ..........................................................................................23

Internal parts / Storage shelves / Door shelves .....................................................24

Hints / Saving Energy ........................................................................................24

Hints for refrigeration .........................................................................................25

Hints for freezing...............................................................................................25

Hints for storage of frozen food ...........................................................................26

Explanation of the cold zonesigns........................................................................26

Maintenance / Defrosting ..................................................................................27

How to change the bulb.....................................................................................28

Something not Working......................................................................................29

Customer Service and Spare Parts / Technical Specifications .................................30

Installation / Positioning ...................................................................................30

Electrical connection .........................................................................................31

Change of door opening direction of frozen food compartment ................................31

Door reversal....................................................................................................32

Building-in........................................................................................................33

Contents

21

Domestic Use

Keep these instructions and they should

remain at the appliance when moving

away or changing owner.

This appliance is designed for storing

food, domestic use and being used

according to these instructions only.

Specialised companies that are quali-

fied to do so by the manufacturer must

carry out service and repairs including

repairing and changing the power

cord. Accessory parts supplied by them

should be used only for repairing.

Otherwise the appliance can be damaged

or can cause other damage or injury.

Make sure that the mains plug is accessi-

ble after the installation of the appliance.

Before maintenance, switch off the appli-

ance and disconnect the mains plug from

the mains socket.

Power cord must not be lengthened.

Make sure that the power plug is not

squashed or damaged by the back of

the fridge/freezer.

- A damaged power plug may overheat

and cause a fire.

Do not place heavy articles or the

fridge/freezer itself on the power cord.

- There is a risk of a short circuit and fire.

Do not remove the power cord by

pulling on its lead, particularly when

the fridge/freezer is being pulled out

of its niche.

- Damage to the cord may cause a short-

circuit, fire and/or electric shock.

- If the power cord is damaged, it must be

replaced by a certified service agent or

qualified service personnel.

If the power plug socket is loose, do

not insert the power plug.

- There is a risk of electric shock or fire.

Without the lamp cover of interior lighting

you must not operate the appliance.

When cleaning, defrosting, taking out

frozen food or ice tray do not use sharp,

pointed or hard devices, as they can

cause damage to the appliance.

Be careful not to allow liquids to the tem-

perature control and lighting box.

Ice and ice-cream can cause hurt if they

are eaten immediately after removal from

the frozen food compartment.

After dissolving frozen food must not be

refrozen, it must be used up as soon as

possible.

Store pre-packed frozen food in accor-

dance with the frozen food manufacturer's

instructions.

You must not make defrosting faster with

any electric heating appliance or chemi-

cals.

Do not put hot pot to the plastic parts.

Do not store flammable gas and liquid in

the appliance, because they may explode.

Do not store carbonated drinks, bottled

drinks and bottled fruits in the frozen food

compartment.

Check and clean the outlet of melting

water coming during defrosting regularly -

a label inside the appliance warns you for

this. If it is clogged the melting water gath-

ered can cause earlier failure.

Precautions for child safety

Do not allow children to play with the

packaging of the appliance. Plastic foil

can cause suffocation.

Adults must handle the appliance. Do not

allow children to play with it or its control-

ling parts.

If you are discarding the appliance pull the

plug out of the socket, cut the connection

cable (as close to the appliance as you

can) and remove the door to prevent play-

ing children to suffer electric shock or to

close themselves into it.

This information has been provided in the interests of your safety. Please read it before

installing or using the appliance. Please retain the instruction book for future refer-

ence. If owner ship is transferred, please leave the user manual for the new owner.

Safety Instructions

22

This appliance is not intended for use by

persons (including children) with reduced

physical sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appli-

ance by a person responsible for their

safety.

Environment Protection

This appliance does not contain gasses

which could damage the ozone layer, in

either its refrigerant circuit or insulation

materials. Theappliance shall not be dis-

carded together with the urban refuse and

rubbish. Avoid damaging the cooling unit.

Information on your local disposal sites

may be obtained from your municipal

authorities.

Remove the plug and ensure that any

locks or catches are removed, to prevent

young children being trapped inside.

Disposal

Appliance Packaging Information

The materials marked with the symbol

are recyclable.

>PE< for polyethylene, e.g. sheet wrapping

material

>PS< for polystyrene, e.g. padding material

(always CFC-free)

>POM< polyoxymethylene, e.g. plastic clips.

All materials are environmentally sound!

Safety precautions for isobutane

Warning

The refrigerant of the appliance is isobu-

tane (R 600a) that is inflammable and

explosive to a greater extent.

Keep ventilation openings, in the appli-

ance enclosure or in the built-in structure,

clear of obstruction.

Do not use mechanical devices or other

means to accelerate the defrosting

process, other than those recommended

by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the

food storage compartments of the appli-

ance, unless they are of the type recom-

mended by the manufacturer.

23

Do not use detergents or abrasive

powders, as these will damage the

finish.

Remove safety elements used for trans-

portation.

Before Use

Insert the plug into the wall socket and

turn the thermostat knob clockwise

beyond position «O» (OFF).

The thermostat control situated inside the

fridge compartment regulates the temper-

ature of the appliance.

Turn the thermostat control to the

required setting.

Wait 4 hours before connecting the appli-

ance to allow the oil to flow back in the com-

pressor.

Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

some neutral soap so as to remove the

typical smell of a brand-new product, then

dry thoroughly.

Starting the appliance

Temperature Control

The following effects are of significance in

respect of the interior temperature:

Ambient temperature

Quantity and temperature of the food

stored;

Frequency with which the door is opened

and how long it is left open

the location of the appliance.

The temperature inside the appliance is

automatically adjusted.

Setting “1” = hightest temperature,

warmest setting

Setting “6” = lowest temperature, cold-

est setting.

Setting “ ” = Off

A medium setting is generally the most

suitable.

24

Internal Parts

Storage shelves

The shelves can be removed for cleaning.

To permit storage of food packages of

various sizes, the shelves can be placed

at different heights.

To remove the internal shelf pull forward

until it can be tipped up or down and

removed.

Please do the same in reverse to insert

the shelf at a different height.

The glass shelf above the vegetable

drawers and the bottle shelf should

always remain in position, to ensure

correct air circulation.

Door shelves

To permit storage of food packages of

various sizes, the central door shelf can

be adjusted in height.

Gradually pull the shelf in the direction of

the arrows until it comes free, then repo-

sition as required.

For more thorough cleaning, the top and

bottom door sheves can be easily

removed and refitted in position.

Saving Energy

Pay careful attention to where the cabinet

is placed. See the section Installation.

When installed correctly the cabinet will

consume less energy.

Try to avoid keeping the doors open for

long periods or opening the doors too fre-

quently as warm air will enter the cabinet

and cause the compressor to switch on

unnecessarily often.

Hints

If the ambient temperature is high, the ther-

mostat knob is on the coldest setting (high-

er numbers) and the appliance is fully

loaded, the compressor may run continu-

ously, causing frost or ice to form on the

evaporator. If this happens, turn the knob

to a warmer setting (lower numbers) to

allow automatic defrosting and so a saving

in electricity consumption.

Do not place warm foods inside the appli-

ance. Allow warm foods to cool first.

Keep the heat emitting condenser, the met-

all grille on the rear wall of your appliance,

always clean.

25

Do not store warm food or evaporating liq-

uids in the refrigerator and do cover or

wrap up the food, particularly if it has a

strong smell.

To help you use your refrigerator correctly,

here are some useful hints:

Raw meat (beef, pork, lamb & poultry):

wrap in polythene bags and place on top

of the salad compartment, this being the

coldest spot in the refrigerator.

Meat can only be stored safely in this way

for one or two days at the most.

Cooked food, cold cuts, jelly, etc.:

these should be well covered and can be

stored on any of the glass shelves.

Fruit & vegetables: these should be thor-

oughly cleaned and placed in the bottom

drawer/s.

Butter & cheese: these should be placed

in special airtight containers or wrapped in

aluminium foil or polythene bags to keep

out as much air as possible.

Milk bottles: these should have a top and

should be stored in the bottle rack on the

door.

Bananas, potatoes, onions and garlic, if

not packed, must not be kept in the refrig-

erator

Hints for refrigeration

Hints for freezing

To help you make the most of the freezing

process, here are some important hints:

the maximum quantity of food which can

be frozen in 24 hrs. is shown on the rating

plate;

the freezing process takes 24 hours. No

further food to be frozen should be added

during this period;

only freeze top quality, fresh and thor-

oughly cleaned, foodstuffs;

prepare food in small portions to enable it

to be rapidly and completely frozen and to

make it possible subsequently to thaw

only the quantity required;

wrap up the food in aluminium foil or poly-

thene and make sure that the packages

are airtight;

do not allow fresh, unfrozen food to touch

food which is already frozen, thus avoiding

a rise in temperature of the latter;

lean foods store better and longer than

fatty ones; salt reduces the storage life of

food;

water ices, if consumed immediately after

removal from the freezer compartment,

can possibly cause the skin to be freeze

burnt;

it is advisable to show the freezing in date

on each individual pack to enable you to

keep tab of the storage time.

26

Hints for storage of frozen food

To obtain the best performance from this

appliance, you should:

make sure that the commercially frozen

foodstuffs were adequately stored by the

retailer;

be sure that frozen foodstuffs are trans-

ferred from the foodstore to the freezer in

the shortest possible time;

not open the door frequently or leave it

open longer than absolutely necessary.

Once defrosted, food deteriorates rapidly

and cannot be refrozen.

Do not exceed the storage period indicat-

ed by the food manufacturer.

Explanation of the cold zonesigns

The symbol shown here on the left

indicates the coldest point inside your

refrigerator.

Coldest area: below or equal to +4°C

Meat, poultry, fish, cold cuts, ready-to-eat

meals, mixed salads, egg or cream based

mixes and cakes, fresh pasta, cake mixes,

pizzas/quiches, fresh foods and fresh-milk

cheeses, vegetables ready to be used and

packed in plastic bags and all other fresh

foods whose expiry date is associated with a

preservation temperature below or equal to

+4°C.

T

emperatur indicator

Thermostat must be Right Temperature

adjusted

With the temperature indicator you can keep

a check that your refrigerator is working prop-

erly.

The indicator shows the "OK" symbol when

the coldest area reaches a temperature that

is below or equal to 4ˇC.

If the temperature is higher than 4ˇC the indi-

cator is black so you must adjust the thermo-

stat to make the temperature drop.

ATTENTION: Keeping the refrigerator door

open for a long time will cause the internal

temperature to rise. To measure the tempera-

ture correctly, it should be read on the indica-

tor within 30 seconds.

27

Unplug the appliance before carry-

ing out any maintenance opera-

tion.

Warning

This appliance contains hydrocarbons in its

cooling unit maintenance and recharging

must therefore only be carried out by autho-

rised technicians.

Defrosting

Bleeding part of the moisture of cooling

chamber in form of frost and ice goes with

the operation of the refrigerator.

Thick frost and ice has an insulating effect,

so it reduces cooling efficiency as the tem-

perature increases, it needs more energy, at

a certain thickness it does not allow the door

of the frozen food compartment to open,

possibly the door can be broken.

At this type of appliance defrosting fresh

food compartment is automatic without any

external intervention.

The thermostatic control interrupts the opera-

tion of compressor at regular intervals for

more or less time - during this cooling is

interrupted - temperature of the fresh food

compartment increases and defrosting

occurs. After defrosting the thermostatic

control restarts operation of the system.

Melting water flows through defrost water

outlet into the evaporative tray maintained on

the top of compressor and evaporates due to

warmth of it.

Check and clean the outlet of

melting water coming during

defrosting regularly. If it is

clogged the melting water gath-

ered can cause earlier failure as it

can go to the insulating of the

appliance.

Maintenance

Clean the melting water outlet with the sup-

plied pipe scraper that can be seen in the fig-

ure. The pipe scraper has to be stored in the

outlet.

Occasionally check defrost water outlet not to

be clogged up.

The most typical case of clogging up in the

defrost water outlet when you put food

wrapped in some paper into the appliance

and this paper contacts back plate of fresh

food compartment and freezes to it. If you

remove the food right at this moment the

paper will tear and it can cause clogging up

in the outlet by getting into it. So you are

asked to be careful - because of the above -

when placing foods wrapped in paper into the

appliance.

In case of increased demand e.g. dur-

ing heatwaves, the refrigerator tem-

porarily happens to operate constant-

ly. During this the automatic defrosting

is ineffective.

Remaining small ice and frost stains on back

plate of the fresh food compartment after

defrosting period is not abnormal.

The frozen food compartment can not be

equipped with automatic defrosting set since

the deep-frozen and frozen foods do not

endure melting temperature.

Provided it is not too thick, the layer of frost

or ice can be scraped off and removed using

a plastic scraper.

When ice coating is so thick that it can not be

removed with the plastic scraper, the frozen

food compartment has to be defrosted (gen-

erally 2-3 times a year).

28

Disconnect the appliance from the electricity

supply.

Empty all foods and clean the appliance,

leaving the doors ajar to prevent unpleasant

smells.

Should the light fail to work you can change it

as below:

Break the circuit of the appliance.

Unscrew the plate screw fixing the lamp

cover, then take the lamp cover off in the

direction of arrow and the bulb can be

changed. (Type of the bulb: Mignon 322,

230 V, 15 W, E 14 thread)

How to change the bulb

After changing bulb replace the lamp cover,

screw the plate screw and apply voltage to

the appliance.

The lack of light does not influence operation

of the refrigerator.

Take the foods out of the frozen and fresh

food compartment, wrap them into some lay-

ers of paper or cloth. Put them to a possible

cool place while defrosting.

Break the circuit of the appliance and leave

the doors of frozen and fresh food compart-

ment open.

Continuously blot off the defrosting water by a

soft cloth or sponge.

After defrosting wipe the surfaces, apply volt-

age to the appliance and put the foods back

to their places.

It is recommended to operate the appliance

at the highest position of the thermostatic

control so that it can reach the proper storing

temperature as soon as possible.

Cleaning

Never use metal objects for clean-

ing your appliance as it may get

damaged.

NEVER use detergents, abrasive powders,

highly perfumed cleaning products or wax

polishes to clean the interior as these will

damage the surface and leave a strong

odour.

Clean the inside with warm water and bicar-

bonate of soda. Rinse and dry thoroughly.

To guarantee a safe operation of the fridge,

once a year remove the ventilation grill at the

base and clean the air channels with a vacu-

um cleaner.

29

Something not Working

Problems may be due to causes which

can easily be solved before calling the

Technical Service. Please follow these

instructions:

SYMPTOM

Door does not close

It is too warm inside the refrig-

erator

It is too cold inside the refriger-

ator.

The compressor works contin-

uously.

There is water inside/outside

the refrigerator.

Water comes out on the floor.

Noises

SOLUTION

Level properly the appliances if it is not well levelled.

Weight surpasses the storage limit of the door shelf so spread weight

more evenly or take some products out.

The appliance is not properly installed. Please look in the “Building-in”

section.

Set a lower temperature.

Distribute the food products to allow cold air to circulate around them.

Make sure that the door is completely closed and that the insulating strip

is complete and clean.

The temperature where the cabinet is placed is above normal room tem-

perature.

Turn the temperature regulator to a warmer setting temporarily.

Turn the thermostat knob to a lower number.

The temperature where the cabinet is placed is above normal room tem-

perature.

Check that the ventilation is sufficient and that the ventilation openings

are unobstructed.

The cause could be the introduction of large quantities of food and/or

frequent opening/closing of the door.

Sometimes is normal. During automatic defrosting frost thaws on the

cooling plate.

Place the drain hose at the back of the cabinet above the drain bowl.

Sometimes this is normal. Temperature control may cause clicking

sounds when the system is connected or disconnected.

The injected cooling gas may produce a gurgling sound while passing

through the tubes.

The motor may cause a humming noise and/or slight bumping.

The insulation material used has a tendency to slighly increase noise lev-

els, how ever it allows for much better insulation and a lower energy con-

sumption.

30

If you cannot find the remedy for a malfunc-

tion in these operating instructions, please

contact your dealer or our customer service

department and consult the Guarantee card.

Selective ordering of replacement parts can

save unnecessary travel and costs.

For this reason always provide the following

appliance information:

Model Name

Model Number (PNC)

Serial Number (S-No.)

This information can be found on the rating

plate inside the cabenit on the left hand wall.

We recommend that you enter this informa-

tion here, so that it is handy if needed.

Technical specifications

The technical data is indicated in the rating

plate on the left side inside the appliance.

Customer service and spare parts

Take utmost care when handling

your appliance so as not to cause

any damages to the cooling unit

with consequent possible fluid

leakages.

During normal operation, the condenser

and compressor at the back of the appli-

ance heat up considerably. Always ensure

that there is adequate ventilation as a fail-

ure to do this will result in component fail-

ure and possible food loss. See installa-

tion instructions.

Important: if the supply cord is damaged,

it must be replaced by a special cord or

assembly available from the manufacturer

or its service agent.

Positioning

Unpack the cabinet and check that it is in

good condition and free of any transport

damage.

The appliance must not be located close

to radiators or gas cookers.

Avoid prolonged exposure of the appli-

ance to direct sunlight.

For safety reasons, minimum ventilation

must be as shown in Fig.

Attention: keep ventilation openings clear

of obstruction.

It is necessary that the niche is provided

with a conduct of venti-lation having the

following dimensions:

Depth: 50 mm

Width: 540 mm

The climate classification can be found on the

rating plate, which is located inside the cabi-

net on the left hand wall.

The following table shows which ambient tem-

perature is correct for each climate classifica-

tion:

Climate for an ambient

classification temperature of

SN +10 to +32 °C

N +16 to +32 °C

ST +16 to +38 °C

T +16 to +43 °C

Installation

31

Before plugging in, ensure that the voltage

and frequency shown on the rating plate cor-

respond to your domestic power supply.

The appliance must be earthed. The power

supply cable plug is provided with a contact

for this purpose. If the domestic power sup-

ply socket is not earthed, connect the appli-

ance to a separate earth in compliance with

Electrical connection

current regulations, consulting a qualified

electrician.

The manufacturer declines all responsibility if

the above safety precautions are not

observed.

This appliance complies with the E.E.C.

Directives.

After changing the outer door opening direc-

tion at this type it is necessary to remount the

door of the frozen food compartment as well.

Operations and their order can be seen in fig-

ure.

Press the retaining lever inside the lower

doorhinge.

Tilt the lower doorhinge out together with

the freezer compartment door then

remove it from the pin of the freezer com-

partment door.

Remove the rectangular plug and put it

into the opening got free on the other

side.

Having the freezer compartment door

turned by 180° put the lower hinge onto

the lower pin of the freezer compartment

door.

Put the upper hinge pin of the freezer

compartment door into the free opening,

then push the lower hinge into its place

together with the freezer compartment

door.

In case you do not want to perform the pro-

cedures above, call the nearest brand-mark

service. Technicians will accomplish the refit-

ting expertly for charge.

Change of door opening direction of frozen food compartment

32

Door reversal

After reversing the door, make sure the

magnetic seal adheres to the cabinet.

If the room temperature is cold (e.g. in

winter ), the seal may not adhere per-

fectly to the cabinet. In this case, wait

until the seal has softened on its own

or speed up the process by warming

the relevant part with a normal hair-

dryer.

T

AW2MERA

T

AW2MERA

T

AW1MERA

T

AW1MERA

T

AW3MERA

T

AW3MERA

T

33

Building-in

Dimensions of the recess

It is necessary that the niche is provided with a

conduct of ventilation having the following

dimensions:

Depth 50 mm

Width 540 mm

Compartment levelling

Door removal

The following assembly steps only apply for

doors with rabbet on the right side (supply sta-

100

90

MAU2ME

tus). If the door rabbet is provided for on the

left side, please carry out the relevant assem-

bly steps on the opposite side.

1. Make the adjustments.

2. Cut the side trim (E).

F

AL2MERA

F

AL1MERA

1BL80R

34

3. Apply the side trim (E).

4. Insert the appliance.

5. Fix the appliance.

GF1MERA

PL09

FAL3MERA

6. Apply the hole covers.

7. Fit the decorative panel.

8. Fitting the handle.

PL13

PL12

SAB1ME

35

9. Refit the door.

10. Door alignment (if necessary).

TE1MERA

Page is loading ...

52

8. Bevestiging van de handgreep.

9. Bevestiging van de deur .

10. Uitlijnen van de deur (indien nodig).

TE1MERA

PL13

Page is loading ...

69

8. Montage Türgriff

9. Gerätetür einsetzen.

10. Gerätetür ausrichten (falls erforderlich).

TE1MERA

PL13

Page is loading ...

Groupe Brandt DRH915JE Owner's manual

Groupe Brandt DRH915JE Owner's manual

in other languages

Related papers

Other documents