Page is loading ...
Pixels-170
Professional Aluminium Video Tripod With
Mid-Level Spreader
Maximum Stability • 3-Segment Interlocking Legs • 10kg Load Capacity
Pixels-170 is a combination of stability and innovative technical features for photographers and
videographers alike. This Tripod is a 3-segment interlocking tripod featuring durable aluminum
telescopic legs that offer immense stability and durability. Its leg locking levers are secure.
Pixels-170 is an extremely versatile tripod, suitable for a wide range of photography and
videography applications.
Introduction
• Pixels-170
• Carry Case
• User Guide
Packaging Contents
• Maximum Height: 170cm
• Minimum Height: 80cm
• Folded Height: 86cm
• Sections: 3
• Load Capacity: kg
• Weight: 3.5kg
Specifications
Features
• 3-Way Pan and Tilt Head: The pan and tilt head allows for fluid camera positioning and
accurate alignment.
• Secure Telescoping Legs: The flip-locks allow for quick and secure adjustment of the
telescoping tripod legs, while the center brace adds stability by connecting the legs to make
them more rigid.
• Quick-Release Plate: The quick release plate is the quickest way to mount or unmount and
align your camera to the tripod head.
• Bubble Level: The bubble level ensures that your shot is aligned to the best angle always.
• Maximum Stability: The mid-level spreader offers great stability imperative to videography.
• Sure-Grip Feet: Get maximum traction on any surface for that impeccable shot in any
environment be it a concrete floor or grass.
• Carrying Case with Shoulder Strap: Carry this tripod anywhere easily using the provided carry
case
Precautions
Please read all safety instructions and warnings thoroughly before using this product. Improper
use of this product may result in damage to this or attached products.
1. Do not disassemble the product or attempt to fix it.
2. Do not attempt to replace any part of this product.
3. Do not store or use the product in a high temperature environment, including intense sunlight
or heat.
1. Quick Release Plate Lock
2. Mounting Plate
3. Handle Lock Knob
4. Handle
5. Pan Head Locking Knob
6. Center Column Adjustment Lever
7. Grip Handle
8. Telescopic Legs
9. Center Column Lock
10. Gravity Hook
Appearance & Interface Description:
1. Installation and Removal Of Mounting Plate
• Press the safety button.
• Slide out the Mounting plate.
Operation Instructions
7
9
10
8
1
2
6
5
4
3
2. Adjusting the Tilt of the Mounting Plate
• Loosen the Handle Lock Knob
• Reposition the pan head to the desired angle.
• Tighten the Handle Lock Knob.
3. Using the Secure Leg Locks
• Pull the Secure Flip Leg Locks Outward as shown.
• Adjust the tripod leg height.
• Press the flip lock to secure the legs.
/
