ENFORCER CS-PD535-TAQ User manual

Brand: ENFORCER

Model: CS-PD535-TAQ

Category: Security device components

Type: User manual

ENFORCER CS-PD535-TAQ is a proximity sensor with a no-touch operation, which reduces the risk of spreading germs and viruses. It has an adjustable sensor range of 23/8"-8" (6~20 cm) and a 3A relay. The adjustable trigger duration can be set from 0.5 to 30 seconds or to toggle mode. The LED illuminated sensor area and the selectable LED colors (red/green or blue/green) provide easy identification and indicate the sensor's activation status. The sensor is made of ABS plastic and has an operating temperature range of -4°~131° F (-20°~55° C).

ENFORCER CS-PD535-TAQ is a proximity sensor with a no-touch operation, which reduces the risk of spreading germs and viruses. It has an adjustable sensor range of 23/8"-8" (6~20 cm) and a 3A relay. The adjustable trigger duration can be set from 0.5 to 30 seconds or to toggle mode. The LED illuminated sensor area and the selectable LED colors (red/green or blue/green) provide easy identification and indicate the sensor's activation status. The sensor is made of ABS plastic and has an operating temperature range of -4°~131° F (-20°~55° C).

Superior Electronics Corporation

No.10, Lane 31, Chongde St., Sinyi District, Taipei City 110, Taiwan

Copyright © 2020 Superior Electronics Corporation. All rights reserved.

All trademarks are the property of Superior Electronics Corporation or their respective owners.

Superior Electronics Corporation's policy is one of continual development. For that reason, we reserve the right to change prices

and specifications without notice. Superior Electronics Corporation is not responsible for misprints.

Tel:886-2-2378-6161 • Fax:886-2-2378-6163

E-mail: [email protected]

• Website: www.enforcer.com.tw

PI

_CS

-

PD535

-

TxQ_SEC_201015.docx

Infrared Proximity Sensors

CS

-

PD

53

5

-

T

A

Q

Square, Red/Green LED status indicator

CS-PD535-TBQ

Square, Blue/Green LED status indicator

Features:

• No-touch operation reduces the risk of spread of germs,

viruses, etc., through cross-contamination

• Adjustable sensor range 2

3

/

8

"-8" (6~20 cm), 3A relay,

adjustable trigger duration 0.5~30 seconds or toggle

• LED illuminated sensor area for easy identification

• Selectable LED colors turns from red to green or green to red

(blue to green / green to blue for CS-PD535-TBQ) to show the

sensor is activated

Overview:

1

7

/

16

"

(37mm)

2

"

(50mm)

1

1

/

4

"

(32mm)

2

1/

8

"

(55mm)

1

3

/

4

"

(44mm)

1

11

/

16

"

(43mm)

1

1

/

8

"

(29mm)

5

/

16

"

(8mm)

Specifications:

Model

CS

-

PD535

-

TAQ

CS

-

PD535

-

T

B

Q

Operating voltage

12~24 VDC

Current draw (max.)

120mA@12VDC

Relay

type

Form C dry contact,

NO/NC/COM,

3

A@24VDC

Connectors

Quick

-

connect, screwless terminal block

Response time

10mS

Output time

Adjustable, 0.5~3

0s, toggle

, or as long as sensor is

triggered

Sensing r

ange

Adjustable, 2

3

/

8

"~8" (6

~

20

cm)

LED Status

indicator

R

ed/green or green/red*

Blue/green or green/blue*

Operating

life

Relay

500,000 cycles

Sensor

100,000 hours

Case material

ABS Plastic

Operating temperature

-

4°~131° F (

-

20°~55° C)

Dimensions

1

3

/

4

"

x

2

1

/

8

"

x1

7

/

16

"

(44

x55x37

mm)

*

Reversible by jumper

LED Indicators (Selectable):

(CS-PD535-TAQ shown)

Standby

Activated

Sample Applications:

Replace mechanical switch

(machinery, dispensers,

medical devices, etc.)

Access control

WAVE

1

ENFORCER CS-PD535-TAQ User manual

Brand: ENFORCER

Model: CS-PD535-TAQ

Category: Security device components

Type: User manual

ENFORCER CS-PD535-TAQ is a proximity sensor with a no-touch operation, which reduces the risk of spreading germs and viruses. It has an adjustable sensor range of 23/8"-8" (6~20 cm) and a 3A relay. The adjustable trigger duration can be set from 0.5 to 30 seconds or to toggle mode. The LED illuminated sensor area and the selectable LED colors (red/green or blue/green) provide easy identification and indicate the sensor's activation status. The sensor is made of ABS plastic and has an operating temperature range of -4°~131° F (-20°~55° C).

Related papers

Other documents