Pro-Form PFTL81910.1 User manual

Brand: Pro-Form

Model: PFTL81910.1

Category: Treadmills

Type: User manual

Serial Number

Decal

Model No. PFTL79611.0

Serial No.

Write the serial number in the space

above for reference.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

QUESTIONS?

If you have questions, or if parts

are damaged or missing, DO NOT

CONTACT THE STORE; please

contact Customer Care.

IMPORTANT: Please register this

product (see the limited warranty

on the back cover of this manual)

before contacting Customer Care.

CALL TOLL-FREE:

1-888-533-1333

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–4 p.m. MT

ON THE WEB:

www.proformservice.com

USER’S MANUAL

www.proform.com

TABLE OF CONTENTS

WARNING DECAL PLACEMENT ........................................................................................................................... 2

IMPORTANT PRECAUTIONS ................................................................................................................................ 3

BEFORE YOU BEGIN ............................................................................................................................................. 5

PART IDENTIFICATION CHART ............................................................................................................................ 6

ASSEMBLY ............................................................................................................................................................. 7

OPERATION AND ADJUSTMENT ........................................................................................................................ 15

HOW TO FOLD AND MOVE THE TREADMILL .................................................................................................... 25

TROUBLESHOOTING .......................................................................................................................................... 26

EXERCISE GUIDELINES...................................................................................................................................... 29

PART LIST ............................................................................................................................................................ 30

EXPLODED DRAWING ......................................................................................................................................... 32

ORDERING REPLACEMENT PARTS ....................................................................................................Back Cover

LIMITED WARRANTY .............................................................................................................................Back Cover

This drawing shows the locations of the

warning decals. If a decal is missing or il-

legible, call the telephone number on the

front cover of this manual and request a

free replacement decal. Apply the decal

in the location shown. Note: The decals

may not be shown at actual size.

WARNING DECAL PLACEMENT

256836

PROFORM is a registered trademark of ICON IP, Inc. iPod, iPod nano, iPod touch, and iTunes are registered

trademarks of Apple Inc., registered in the U.S. and other countries. iPod

is not included. Nike is a registered

trademark of NIKE, Inc. and its afliated companies.

1. Before beginning any exercise program, con-

sult your physician. This is especially impor-

tant for persons over age 35 or persons with

pre-existing health problems.

2. It is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described.

4. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

5. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and

2 ft. (0.6 m) on each side. Do not place the

treadmill on any surface that blocks air open-

ings. To protect the oor or carpet from dam-

age, place a mat under the treadmill.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should be used only by persons

weighing 325 lbs. (147 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes when

using the treadmill. Do not wear loose clothes

that could become caught in the treadmill.

Athletic support clothes are recommended

for both men and women. Always wear ath-

letic shoes. Never use the treadmill with bare

feet, wearing only stockings, or in sandals.

11. When connecting the power cord (see page

15), plug the power cord into a surge sup-

pressor (not included) and plug the surge

suppressor into a grounded circuit capable of

carrying 15 or more amps. No other appliance

should be on the same circuit. Do not use an

extension cord.

12. Use only a single-outlet surge suppressor

that meets all of the specications described

on page 15. To purchase a surge suppressor,

see your local PROFORM dealer or call the

telephone number on the front cover of this

manual and order part number 146148, or see

your local electronics store.

13. Failure to use a properly-functioning surge

suppressor could result in damage to the con-

trol system of the treadmill. If the control sys-

tem is damaged, the walking belt may slow,

accelerate, or stop unexpectedly, which may

result in a fall and serious injury.

14. Keep the power cord and the surge suppres-

sor away from heated surfaces.

15. Never move the walking belt while the power

is turned off. Do not operate the treadmill

if the power cord or plug is damaged, or if

the treadmill is not working properly. (See

TROUBLESHOOTING on page 26 if the tread-

mill is not working properly.)

16. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 17).

17. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

18. The treadmill is capable of high speeds.

Adjust the speed in small increments to avoid

sudden jumps in speed.

19. The heart rate monitor is not a medical de-

vice. Various factors, including the user’s

movement, may affect the accuracy of heart

rate readings. The heart rate monitor is in-

tended only as an exercise aid in determining

heart rate trends in general.

WARNING: To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your treadmill before using your treadmill. ICON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

IMPORTANT PRECAUTIONS

20. Never leave the treadmill unattended while

it is running. Always remove the key, unplug

the power cord, and press the power switch

into the off position when the treadmill is not

in use. (See the drawing on page 5 for the

location of the power switch.)

21. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 7, and HOW TO FOLD

AND MOVE THE TREADMILL on page 25.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

22. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

23. Never insert any object into any opening on

the treadmill.

24. Inspect and properly tighten all parts of the

treadmill regularly.

25. DANGER: Always unplug the power

cord immediately after use, before clean-

ing the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servic-

ing other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

26. This treadmill is intended for home use only.

Do not use this treadmill in a commercial,

rental, or institutional setting.

27. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

SAVE THESE INSTRUCTIONS

Thank you for selecting the revolutionary PROFORM

POWER 795 treadmill. The POWER 795 treadmill

offers an impressive selection of features designed

to make your workouts at home more enjoyable and

effective. And when you’re not exercising, the unique

treadmill can be folded up, requiring less than half the

oor space of other treadmills.

For your benet, read this manual carefully be-

fore using the treadmill. If you have questions after

reading this manual, please see the front cover of this

manual. To help us assist you, please note the product

model number and serial number before contacting us.

The model number and the location of the serial num-

ber decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Upright

Tray

Key/Clip

Power Switch

Walking Belt

Platform Cushion

Foot Rail

Power Cord

Idler Roller

Adjustment Screws

Console

Heart Rate

Monitor

PART IDENTIFICATION CHART

Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw-

ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key

number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preat-

tached. Extra hardware may be included.

#8 x 3/4" Screw

(2)–10

3/8" Star

Washer (13)–4

1/4" Star

Washer (14)–2

#8 x 1/2" Screw

(2)–6

3/8" Nut (12)–2

5/16" Star

Washer (11)–8

#10 x 3/4" Screw

(9)–2

#10 Star

Washer (12)–4

3/8" x 2 3/4" Screw (7)–4

5/16" x 1"

Bolt (4)–2

1/4" x 1" Patch

Bolt (9)–4

3/8" x 1 3/4" Bolt (6)–1

3/8" x 2" Bolt (3)–1

5/16" x 1"

Screw (5)–4

#8 x 1/2" Ground

Screw (10)–1

#8 x 1/2" Screw

(1)–16

5/16" x 1 1/4"

Bolt (4)–6

3/8" x 1 1/4" Screw (8)–4

1/4" x 1/2"

Bolt (36)–4

1/4" Star

Washer (35)–4

1/4" Star

Washer (35)–2

5/16" Flat

Washer (113)–4

1/4" Flat

Washer (36)–2

#10 x 3/4" Flat

Head Screw (112)–2

ASSEMBLY

• To hire a service technician to assemble this

product in your home, call 1-800-445-2480.

• Assembly requires two persons.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until you nish assembly.

• The underside of the walking belt is coated with

high-performance lubricant. After shipping, there

may be some lubricant on top of the walking belt

or on the shipping carton. This is normal. If there

is lubricant on top of the walking belt, wipe it off

with a soft cloth and a mild, non-abrasive cleaner.

• To identify small parts, see page 6.

• Assembly requires the following tools:

the included hex keys

one adjustable wrench

one Phillips screwdriver

scissors

needlenose pliers

To avoid damaging parts, do not use power tools

for assembly.

1. Make sure that the power cord is unplugged.

Place a piece of cardboard below the rear of the

Frame (56) to protect the oor or carpet.

Attach the Left Wheel Cap (96) to the Base (94)

with two #8 x 3/4" Screws (2).

Attach the Right Wheel Cap (not shown) to

the right side of the Base (94) in the same

way.

Cardboard

2. Pull the Upright Wire (81) and the Base Ground

Wire (110) through the indicated hole in the

Base (94).

Attach the Base Ground Wire (110) to the Base

(94) with a #8 x 1/2" Ground Screw (10).

Press the Grommet (77) into the square hole in

the Base (94).

Hole

110

3. Identify the Left Upright (89), which is either

marked "Left" or "L." Have a second person hold

the Left Upright near the Base (94).

See the inset drawing. Tie the wire tie in the

Left Upright (89) securely around the end of the

Upright Wire (81). Then, pull the other end of the

wire tie until the Upright Wire is routed through

the Left Upright.

Wire

Tie

Wire

Tie

4. Hold the Left Upright (89) against the Base

(94). Be careful not to pinch the Upright Wire

(81). Insert two 3/8" x 1 1/4" Screws (8) with

two 3/8" Star Washers (13) and two 3/8" x

2 3/4" Screws (7) into the Left Upright.

Partially tighten the 3/8" x 2 3/4" Screws (7) and

the 3/8" x 1 1/4" Screws (8) until the heads of

the Screws touch the Left Upright (89); do not

fully tighten the Screws yet.

Attach the Right Upright (not shown) in the

same way. Note: There are no wires on the

right side.

5. Identify the Left Base Cover (82) and the Right

Base Cover (83). Slide the Left Base Cover onto

the Left Upright (89). Slide the Right Base Cover

onto the Right Upright (90). Do not press the

Base Covers into place yet.

Identify the Left Upright Cover (79) and the

Right Upright Cover (80). Slide the Left Upright

Cover onto the Left Upright (89). Slide the Right

Upright Cover onto the Right Upright (90).

6. Cut the plastic tie in the Left Handrail (88) and

the Right Handrail (not shown). If necessary,

press the 5/16" Cage Nuts (31) back into place

(only one is shown).

Identify the Left Handrail (88) and hold it near

the Left Upright (89). Insert the Upright Wire

(81) through the bracket on the bottom of the

Left Handrail. Pull the Upright Wire out of the

end of the Left Handrail.

Tie

7. Attach the Left Handrail (88) to the Left Upright

(89) with two 5/16" x 1" Screws (5), two 5/16"

Star Washers (11), and a 5/16" x 1 1/4" Bolt (4).

Do not fully tighten the Screws and Bolt yet.

Attach the Right Handrail (87) in the same

way.

8. Set the console assembly face down on a soft

surface to avoid scratching the console assem-

bly. Remove the two Screws (A). Next, lift off the

Crossbar (93). Discard the two Screws.

Console

Assembly

9. IMPORTANT: To avoid damaging the

Crossbar (93), do not use power tools and

do not overtighten the #10 x 3/4" Screws (9)

or the #10 x 3/4" Flat Head Screws (112).

Orient the Crossbar (93) as shown. Attach the

Crossbar to the Handrails (87, 88) with two #10

x 3/4" Flat Head Screws (112), two #10 x 3/4"

Screws (9), and two 1/4" Star Washers (35) as

shown. Start all four Screws, and then tighten

them.

112

10. With the help of a second person, hold the con-

sole assembly near the Left Handrail (88).

Connect the Upright Wire (81) to the console

wire. See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn one connector and try

again. IF YOU DO NOT CONNECT THE CON-

NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON

THE POWER. Remove the wire tie from the

Upright Wire.

Console

Assembly

Console

Wire

Tie

Console

Wire

11. Set the console assembly on the Left Handrail

(88) and the Right Handrail (87). Be careful not

to pinch any wires. Insert the excess Upright

Wire (not shown) into the Left Handrail.

Attach the console assembly with six #8 x 1/2"

Screws (1), four 5/16" x 1 1/4" Screws (4), four

5/16" Flat Washers (113), and four 5/16" Star

Washers (11). Start all six Screws and all four

Screws, and then tighten them.

See step 7. Fully tighten the four 5/16" x 1"

Screws (5) and the two 5/16" x 1 1/4" Bolts (4).

Console

Assembly

113

12. Firmly tighten the four 3/8" x 2 3/4" Screws (7)

and the four 3/8" x 1 1/4" Screws (8) (only one

side is shown).

Press the Left Base Cover (82) and the Right

Base Cover (83) onto the Base (94) until they

snap into place.

13. Slide the Left Handrail Cover (85) onto the Left

Handrail (88). Slide the Right Handrail Cover

(86) onto the Right Handrail (87). Attach the

Handrail Covers with two #8 x 1/2" Screws (1).

14. Hold the Left Upright Cover (79) against the

console assembly. Align the holes in the Left

Upright Cover with the holes in the Left Upright

(89). Attach the Left Upright Cover with two #8

x 1/2" Screws (1), a #8 x 3/4" Screw (2), and a

1/4" Flat Washer (36) as shown.

Attach the Right Upright Cover (80) to the

Right Upright (90) in the same way.

Console

Assembly

15. Attach the Left Tray (107) and the Right Tray

(108) to the console assembly with four #8 x 1/2"

Screws (1).

107

108

Console

Assembly

16. IMPORTANT: See page 15 and plug in the

power cord. Next, see page 17 and turn on

the power.

Then, press the Incline increase button

once.

When the frame stops moving, remove the

key from the console and unplug the power

cord.

IMPORTANT:

Make sure to follow

all instructions in

this step

17. IMPORTANT: Before you begin this step,

make sure that you have read and followed

all instructions in step 16.

Next, raise the Frame (56) to the position

shown. Have a second person hold the

Frame until this step is completed.

Orient the Storage Latch (53) so that the large

barrel and the latch knob are oriented as shown.

Attach the lower end of the Storage Latch (53) to

the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8"

Nut (12).

Attach the upper end of the Storage Latch (53)

to the bracket on the Frame (56) with a 3/8" x

1 3/4" Bolt (6) and a 3/8" Nut (12).

Large

Barrel

Latch

Knob

19. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plas-

tic on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill.

Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is

used to adjust the walking belt (see pages 27 and 28).

18. Attach the Rear Feet (57) to the Frame (56) as

shown with four #8 x 3/4" Screws (2).

Lower the Frame (56) (see HOW TO LOWER

THE TREADMILL FOR USE on page 25).

OPERATION AND ADJUSTMENT

HOW TO PLUG IN THE POWER CORD

Your treadmill, like other electronic equipment, can be

damaged by sudden voltage changes in your home’s

power. To decrease the risk of damaging your

treadmill, always use a surge suppressor with your

treadmill (see drawing 1 at the right). To purchase

a surge suppressor, see precaution 12 on page 3.

Use only a single-outlet surge suppressor that is

UL 1449 listed as a transient voltage surge sup-

pressor (TVSS). The surge suppressor must have

a UL suppressed voltage rating of 400 volts or less

and a minimum surge dissipation of 450 joules.

The surge suppressor must be electrically rated for

120 volts AC and 15 amps. There must be a moni-

toring light on the surge suppressor to indicate

whether it is functioning properly. Failure to use a

properly-functioning surge suppressor could dam-

age the control system of the treadmill (see precau-

tion 13 on page 3).

This product must be grounded. If it should mal-

function or break down, grounding provides a path

of least resistance for electric current to reduce the

risk of electric shock. This product’s power cord has

an equipment-grounding conductor and a grounding

plug. Plug the power cord into a surge suppressor,

and plug the surge suppressor into an appropri-

ate outlet that is properly installed and grounded

in accordance with all local codes and ordinances.

IMPORTANT: The treadmill is not compatible with

GFCI-equipped outlets and may not be compatible

with AFCI-equipped outlets.

This product is for use on a nominal 120-volt circuit

(see drawing 1). A temporary adapter may be used to

connect the surge suppressor to a 2-pole receptacle if

a properly-grounded outlet is not available (see

drawing 2).

The temporary adapter should be used only until a

properly-grounded outlet (see drawing 1) can be in-

stalled by a qualied electrician.

The green-colored rigid ear, lug, or the like extend-

ing from the adapter must be connected to a perma-

nent ground such as a grounded outlet box cover.

The adapter must be held in place by a metal screw.

Some 2-pole receptacle outlet box covers are not

grounded. Contact a qualied electrician to deter-

mine if the outlet box cover is grounded before

using an adapter.

DANGER: Improper connec-

tion of the equipment-grounding conductor

increases the risk of electric shock. Check

with a qualied electrician or serviceman if

you are unsure whether the product is prop-

erly grounded. Do not modify the plug—if it

will not t the outlet, have a proper outlet in-

stalled by a qualied electrician.

Grounded Outlet Box

Grounding Plug

Surge Suppressor

Grounding Pin

Grounded Outlet Box

Surge Suppressor

Adapter

Lug

Metal Screw

Grounded Outlet

Grounding Pin

Grounding Plug

ETPF79510

(PFTL79510)

FEATURES OF THE CONSOLE

The treadmill console offers an impressive array of

features designed to make your workouts more effec-

tive and enjoyable. When you use the manual mode,

you can change the speed and incline of the treadmill

with the touch of a button. As you exercise, the con-

sole will display instant exercise feedback. You can

even measure your heart rate using the handgrip heart

rate monitor.

In addition, the console features sixteen onboard work-

outs—four calorie workouts, four interval workouts,

four speed workouts, and four endurance workouts.

Each workout automatically controls the speed and

incline of the treadmill as it guides you through an ef-

fective exercise session.

The console also features an iFit Live mode that en-

ables the treadmill to communicate with your wireless

network through an optional iFit Live module. With the

iFit Live mode, you can download personalized work-

outs, create your own workouts, track your workout

results, race against other runners, and access many

other features. To purchase an iFit Live module at

any time, go to www.iFit.com or call the telephone

number on the front cover of this manual.

You can also connect to Nikeplus.com through the op-

tional PROFORM SYNC. With the SYNC, you can use

an array of tools to analyze your results and monitor

your progress toward your tness goals. To purchase

a SYNC at any time, call the telephone number on

the front cover of this manual.

You can even listen to your favorite workout music or

audio books with the console’s stereo sound system

while you exercise. This treadmill has been designed

specically to work with iPod and has been certied by

the developer to meet Apple performance standards.

To turn on the power, see page 17. To use the man-

ual mode, see page 17. To use an onboard workout,

see page 20. To use an iFit Live workout, see page

21. To use a PROFORM SYNC, see page 22. To use

the information mode, see page 23. To use the ste-

reo sound system, see page 24.

Note: The console can display speed and distance in

either miles or kilometers. To nd which unit of mea-

surement is selected, see THE INFORMATION MODE

on page 23. For simplicity, all instructions in this man-

ual refer to miles.

IMPORTANT: If there are sheets of plastic on the

console, remove the plastic. To prevent damage

to the walking platform, wear clean athletic shoes

while using the treadmill. The rst time you use

the treadmill, observe the alignment of the walking

belt, and center the walking belt if necessary (see

page 28).

CONSOLE DIAGRAM

HOW TO TURN ON THE POWER

IMPORTANT: If the treadmill has been exposed to

cold temperatures, allow it to warm to room tem-

perature before turning on the power. If you do not

do this, you may damage the console displays or

other electrical components.

Plug in the power cord (see

page 15). Next, locate the

power switch on the tread-

mill frame near the power

cord. Press the power

switch into the reset

position.

IMPORTANT: The console features a display demo

mode, designed to be used if the treadmill is dis-

played in a store. If the displays light as soon as

you plug in the power cord and press the power

switch into the reset position, the demo mode is

turned on. To turn off the demo mode, hold down

the Stop button for a few seconds. If the displays

remain lit, see THE INFORMATION MODE on page

23 to turn off the demo mode.

Next, stand on the

foot rails of the

treadmill. Find the

clip attached to the

key and slide the clip

onto the waistband of

your clothes. Then,

insert the key into the

console. After a mo-

ment, the displays will light. IMPORTANT: In an emer-

gency, the key can be pulled from the console,

causing the walking belt to slow to a stop. Test the

clip by carefully taking a few steps backward; if the

key is not pulled from the console, adjust the posi-

tion of the clip.

HOW TO USE THE MANUAL MODE

1. Insert the key into the console.

See HOW TO TURN ON THE POWER at the left.

2. Select the manual mode.

Press the Manual button on the console. If you are

not connected to iFit Live, the manual mode will be

selected automatically.

3. Start the walking belt.

To start the walking belt, press the Start button, the

Speed increase button, or one of the numbered

Quick Speed buttons.

If you press the Start button or the Speed increase

button, the walking belt will begin to move at 1

mph. As you exercise, change the speed of the

walking belt as desired by pressing the Speed in-

crease and decrease buttons. Each time you press

one of the buttons, the speed setting will change

by 0.1 mph; if you hold down the button, the speed

setting will change in increments of 0.5 mph. Note:

After you press the button, it may take a moment

for the walking belt to reach the selected speed

setting.

If you press one of the numbered Quick Speed but-

tons, the walking belt will gradually change speed

until it reaches the selected speed setting. To se-

lect a speed setting that includes a decimal—such

as 3.5 mph—press two numbered buttons in suc-

cession. For example, to select a speed setting of

3.5 mph, press the 3 button and then immediately

press the 5 button.

To stop the walking belt, press the Stop button.

The time will begin to ash in the display. To re-

start the walking belt, press the Start button or the

Speed increase button.

Reset

ETPF79510

(PFTL79510)

Key

Clip

4. Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the

Incline increase or decrease button or one of the

numbered Quick Incline buttons. Each time you

press one of the buttons, the treadmill will gradu-

ally adjust to the selected incline setting.

5. Follow your progress with the displays.

The matrix—When

you select the manual

mode, the matrix will

display a track that rep-

resents 1/4 mile (400

m). As you exercise,

the indicators around the track will appear in suc-

cession until the entire track appears. The track will

then disappear and the indicators will again begin

to appear in succession.

The Calories/Incline

display—This display

will show the approxi-

mate number of calo-

ries you have burned.

The display will also

show the incline of the treadmill for a few seconds

each time the incline of the treadmill changes.

The Time display—

This display will show

the elapsed time. Note:

When an onboard

workout is selected,

the display will show

the time remaining in the workout instead of the

elapsed time.

The Distance dis-

play—This display will

show the distance that

you have walked or run.

The Speed/Pulse

display—This display

will show the speed of

the walking belt. The

display will also show

your heart rate when

you use the handgrip heart rate monitor (see step

6 on page 19).

The Center display—This display will show work-

out instructions.

Press the Home button to return to the start mode

(see THE INFORMATION MODE on page 23 to

set the start mode). If necessary, press the Home

button again.

When an iFit Live mod-

ule is connected to

www.iFit.com, the iFit

Live symbol near the

top of the display will

light.

When a PROFORM

SYNC is connected

to the console, the

Nike+iPod symbol near

the top of the display

will light.

To reset the displays, press the Stop button, re-

move the key, and then reinsert the key.

6. Measure your heart rate if desired.

Before using

the hand-

grip heart

rate monitor,

remove the

sheets of

plastic from

the metal

contacts on

the pulse bar.

In addition,

make sure that your hands are clean.

To measure your heart rate, stand on the foot

rails and hold the pulse bar with your palms on the

metal contacts; avoid moving your hands. When

your pulse is detected, several dashes will appear

and then your heart rate will be shown. For the

most accurate heart rate reading, continue to

hold the contacts for about 15 seconds.

7. Turn on the fan if desired.

The fan features mul-

tiple speed settings.

Press the Fan increase

or decrease button to

select a fan speed or to

turn off the fan. Note: If

the fan is on when the

walking belt is stopped,

the fan will turn off auto-

matically after a few minutes.

8. When you are nished exercising, remove the

key from the console.

Step onto the foot rails, press the Stop button, and

adjust the incline of the treadmill to the lowest

setting. The incline must be at the lowest set-

ting or you may damage the treadmill when you

fold it to the storage position. Next, remove the

key from the console and put it in a secure place.

When you are nished using the treadmill, press

the power switch into the off position and unplug

the power cord. IMPORTANT: If you do not do

this, the treadmill’s electrical components may

wear prematurely.

Contacts

Decrease

Increase

HOW TO USE AN ONBOARD WORKOUT

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 17.

2. Select an onboard workout.

To select an onboard workout, press the Calorie

button, the Interval button, the Speed button, or the

Endure button repeatedly until the desired workout

appears in the display.

When you select an onboard workout, the displays

will show the maximum incline, the duration, the

distance, the maximum speed, and the name of

the workout. In addition, a prole of the speed set-

tings of the workout will appear in the matrix. If you

select a calorie workout, the approximate number of

calories you will burn will appear in the name of the

workout.

3. Start the workout.

Press the Start button or the Speed increase button

to start the workout. A moment after you press the

button, the treadmill will automatically adjust to the

rst speed and incline settings of the workout. Hold

the handrails and begin walking.

Each workout is divided into segments. One speed

setting and one incline setting are programmed for

each segment. Note: The same speed setting and/

or incline setting may be programmed for consecu-

tive segments.

During the workout, the

prole will show your

progress. The ashing

segment of the prole

represents the current

segment of the work-

out. The height of the

ashing segment indicates the speed setting for

the current segment. At the end of each segment, a

series of tones will sound and the next segment of

the prole will begin to ash. If a new speed and/or

incline setting is programmed for the next segment,

the new speed and/or incline setting will appear in

the displays for a few seconds and the treadmill

will automatically adjust to the new speed and/or

incline setting.

The workout will continue in this way until the last

segment of the prole ashes in the display and the

last segment ends. The walking belt will then slow

to a stop.

Note: The calorie goal is an estimate of the

number of calories that you will burn during

the workout. The actual number of calories that

you burn will depend on your metabolic rate. In

addition, if you manually change the speed or

incline of the treadmill during the workout, the

number of calories you burn will be affected.

If the speed or incline setting is too high or too low

at any time during the workout, you can manu-

ally override the setting by pressing the Speed or

Incline buttons; however, when the next segment

of the workout begins, the treadmill will auto-

matically adjust to the speed and incline set-

tings for the next segment.

To stop the workout at any time, press the Stop

button. The time will begin to ash in the display.

To resume the workout, press the Start button or

the Speed increase button. The walking belt will

begin to move at 1 mph. When the next segment of

the workout begins, the treadmill will automatically

adjust to the speed and incline settings for the next

segment.

4. Follow your progress with the displays.

See step 5 on page 18.

5. Measure your heart rate if desired.

See step 6 on page 19.

6. Turn on the fan if desired.

See step 7 on page 19.

7. When you are nished exercising, remove the

key from the console.

See step 8 on page 19.

Current Segment

Page is loading ...

Pro-Form PFTL81910.1 User manual

Brand: Pro-Form

Model: PFTL81910.1

Category: Treadmills

Type: User manual

Download PDF

report

Pro-Form PFTL81910.1 User manual

Pro-Form PFTL81910.1 User manual

Related papers

Other documents