Hunter Fan 45030 User manual

Brand: Hunter Fan

Model: 45030

Category: Air filters

Type: User manual

This manual is also suitable for

45035
45040

Hunter Fan 45030 NiteTime Plus Easy Set Timer automates lights and small appliances, providing timed control. It offers 8 pre-programmed settings for instant setup, including dusk-to-dawn options and random modes for a lived-in appearance. The built-in photocell adjusts for Daylight Savings Time and ambient light, eliminating the need for resetting. The photosensitivity dial accommodates various lighting conditions, and the override button allows manual control when needed.

NiteTime Plus

™

Easy

Set Timer

Setup and Operation Manual

45030

45035

45040

43118-01 r100207

ENGLISH

See page 2

ESPAÑOL

Vea la página 19

43118-01 r100207

TABLE OF CONTENTS

Description ............................................................................................... 5

Features ................................................................................................... 6

Limitations/Warnings ................................................................................ 7

How to Use the NiteTime Plus™ .............................................................. 8

Choose the Timer Setting .................................................................. 8

Set up the NiteTime Plus ........................................................................ 11

Adjusting the Photosensitivity Dial ................................................... 11

Program Setup ................................................................................. 15

Override Operation .......................................................................... 17

43118-01 r100207

Power Outlet

Photocell

NiteTime Plus™ Easy Set Timer

Program Dial

A/C Plug

43118-01 r100207

Photosensitivity

Dial

Override Button

/ LED

DESCRIPTION

The NiteTime Plus™ provides automated, timed control of lights and

small appliances. The NiteTime Plus™ plugs into a wall outlet and

connects to a standard household lamp or small appliance. The low

profile design fits behind furniture and offers a discreet design to fit any

room décor.

Eight pre-programmed settings allow for instant, one-time setup.

Programs include basic On and Off timed settings triggered by lighting

conditions, as well as randomly-timed modes for creating a lived-in

appearance while you are away from home.

A built-in photocell automatically adjusts the timer to Daylight Savings

Time changes so no resetting is required – even after power outages.

The NiteTime Plus™ also includes a photosensitivity setting for use in

rooms with low or high ambient lighting.

The convenient Override button allows temporary override of

programming for use of a lamp or small appliance.

43118-01 r100207

FEATURES

• Eightpre-programmedOn-Offtimesegmentsallowforinstantsetup,

one-time setup.

• Built-inphotocellsensesambientroomlightandautomatically

triggers On-Off time segments.

• Built-inphotocellautomaticallyadjuststimerforDaylightSavings

Time changes.

• Photosensitivitysettingadjuststimertoambientroomlightlevels.

• Timerrequiresnoresetting–evenafterpoweroutages.

• Overridebuttonallowsfortemporaryuseoflampsorsmall

appliances.

• Lowprofiledesignfitsbehindfurnitureandblendswithroomdécor.

• Timercanbeusedwithincandescent(standardbulb),compact

fluorescent(CFL),orhalogen-basedbulblamps.

43118-01 r100207

• Timercanbeusedwithsmallappliancesunder500wattsorfour

Amps such as a radio or television.

LIMITATIONS/WARNINGS

• Forindooruseonly

• Notrecommendedfordevicesover500wattsorfourAmps

• Whenusedonadevicecontrolledbyawallswitch,thewallswitch

must remain on at all times for the NiteTime Plus™ to function

properly.

• Whenusedonalampwithadimmer,thedimmerfunctionalityis

inoperable.

43118-01 r100207

HOW TO USE THE NITETIME PLUS™

Choose the Timer Setting

Before plugging the timer into a wall outlet, choose the desired time

program using the Program dial. These instructions apply to both

lamps and small electronics. Once set, the program never needs

resetting for Daylight Savings Time or power outages.

If a timed program is not needed, set the Program dial to 1 Power On

and use the lamp switch to turn the lamp On and Off. To revert back

to a timed program, change the Program dial to one of the following

settings:

2 – Dusk +2hr turns power On at dusk, turns power off 2 hours later.

3 – Dusk +4hr turns power On at dusk, turns power off 4 hours later.

4 – Dusk +6hr turns power On at dusk, turns power off 6 hours later.

43118-01 r100207

5 – Dusk +8hr turns power On at dusk, turns power off 8 hours later.

6 – Dusk +2hr Randomly powers On / off for 30 minutes within each

hour after dusk for 2 hours.

7 – Dusk +4hr Randomly powers On / off for 30 minutes within each

hour after dusk for 4 hours.

8 – Dusk +6hr Randomly powers On / off for 30 minutes within each

hour after dusk for 6 hours.

43118-01 r100207

MIN

1 - Power On

2 - Dusk + 2hr

3 - Dusk + 4hr

4 - Dusk + 6hr

5 - Dusk + 8hr

6 - Dusk + 2hr Random

7 - Dusk + 4hr Random

8 - Dusk + 6hr Random

Menu of Timer

Settings

A/C Plug

Program

Dial

Power

Outlet

Photosensitivity

Dial

43118-01 r100207

SET UP THE NITETIME PLUS™

Adjusting the Photosensitivity Dial

1. Find a preferred location with the appropriate type of lamp or

appliance. The ambient lighting condition is the preferred condition

for the light to turn On.

2. Turn the lamp or appliance Off.

3.SettheProgramdialtoyourpreferredsetting(seeChoosetheTimer

Settingabove).

4. Set the Photosensitivity Dial to Minimum.

5. Plug the lamp or appliance into the NiteTime Plus™.

Lamp or

Appliance Cord

Wall outlet

43118-01 r100207

NiteTime

6. Plug the NiteTime Plus™ into a wall outlet.

7. Turn the lamp or appliance On.

8. Slowly dial the Sensitivity dial from Minimum toward Maximum until

the lamp or appliance powers On. Avoid casting a shadow over the

NiteTime Plus™ photocell.

9. The Photocell will turn On the light or appliance according to this

lighting condition. The Photosensitivity dial is now set.

43118-01 r100207

MIN

1 - Power On

2 - Dusk + 2hr

3 - Dusk + 4hr

4 - Dusk + 6hr

5 - Dusk + 8hr

6 - Dusk + 2hr Random

7 - Dusk + 4hr Random

8 - Dusk + 6hr Random

Program

Dial

Photosensitivity

Dial

43118-01 r100207

Program Setup

1. Remove the NiteTime Plus™ from the wall and Set the Program dial

toyourpreferredprogram.(SeeChoosetheTimerSetting,above.)

2. Plug the NiteTime Plus™ into the wall outlet.

The NiteTime Plus™ is now set up to control your lamp or appliance.

43118-01 r100207

Override Button /

LED

43118-01 r100207

Override Operation

The Override button on the front of the NiteTime Plus™ lets you

temporarily override the existing program and use the attached lamp or

appliance without programming.

Press the Override button once to power the lamp or appliance On

orOff(dependingonthecurrentprogramsequence).Toreturnthe

NiteTime Plus™ to its programming, press the Override button one

more time.

In the event the Override button is not manually pressed to return

to programming, the NiteTime Plus™ automatically reverts to

programming during the next time sequence.

The LED under the Override Button comes on when the timer output is

off. The LED goes off when the timer output is on.

43118-01 r100207

Hunter Fan Company

2500 Frisco Avenue

Memphis, Tennessee 38114

For other problems or questions, contact the

Temporizador NiteTime Plus

™

de fácil ajuste



45030

45035

45040

43118-02 r100207

ESPAÑOL

43118-02 r100207

Page is loading ...

Hunter Fan 45030 User manual

Brand: Hunter Fan

Model: 45030

Category: Air filters

Type: User manual

This manual is also suitable for

45035
45040

Download PDF

report

Hunter Fan 45030 User manual

This manual is also suitable for

Hunter Fan 45030 User manual

Related papers

Other documents