2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. LG
  6. 37LC2R
37LC2R

LG 37LC2R, 42LC2R, 42PC3R, 50PC1R User manual

  • Hello! I am an AI chatbot trained to assist you with the LG 37LC2R User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PP//NNOO:: 3388228899UU00002255BB ((00660033--RREEVV0000))
Printed in Korea
OWNER’S MANUAL
LCD TV PLASMA TV
LCD TV MODELS PLASMA TV MODELS
37LC2R
**
42LC2R
**
42PC1R
**
42PC3R
**
50PC1R
**
PPlleeaassee rreeaadd IInnffoorrmmaattiioonn
M
aannuuaall iinncclluuddeedd
ttooggeetthheerr bbeeffoorree rreeaaddiinngg tthhiiss mmaannuuaall aanndd ooppeerraatt--
iinngg yyoouurr sseett..
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer when you require service.
Model number :
Serial number :
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
PORTUGUÊS
NEDERLANDS
∂ÏÏËÓÈÎ
¿
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
Owner's Manual
Owner’s Manual Batteries
OK
INPUT
TVTV
INPUT
PIP PR- PIP PR+
SWAP
PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
MUTE
PR
SLEEP
LIST
I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
10
FAV
?
Remote Control Power Cord
2-Wall brackets
2-eye-bolts
2-bolts for stand assembly
(Refer p.11)
This feature is not available
for all models.
2-TV brackets
2-Wall brackets
2-bolts
Cable
Management
Twister Holder
Arrange the wires
with the twister holder.
1
ACCESSORIES
FFoorr 4422PPCC11RR
**
,, 5500PPCC11RR
**
,, 4422PPCC33RR
**
FFoorr 3377LLCC22RR
**
,, 4422LLCC22RR
**
Polishing Cloth
Polish the screen with the cloth
(Option)
2
CONTENTS
CONTENTS
AACCCCEESSSSOORRIIEESS
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INTRODUCTION
Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . . . . . .
4-8
Remote Control Key Functions/
Installing Batteries
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9-10
TV MENU
On Screen Menus Selection and Adjustment . . . . .34
SSeettttiinngg uupp TTVV ssttaattiioonnss
Auto programme tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35
Manual programme tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
36
Fine tuning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Assigning a station name
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
38
Booster (Option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Programme edit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Favourite programme
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
Calling the programme table
. . . . . . . . . . . . . . . . . . . . . . . . .
42
PPiiccttuurree MMeennuu
PSM (Picture Status Memory)
. . . . . . . . . . . . . . . . . . . . . .43
Picture Adjustment (PSM-User option)
. . . . . . . . .44
CSM (Colour Status Memory)
. . . . . . . . . . . . . . . . . . . . . .45
Manual Colour Temperature Control
(CSM - User option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Advanced
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Reset
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
SSoouunndd MMeennuu
SSM (Sound Status Memory)
. . . . . . . . . . . . . . . . . . . . . . .50
Sound Frequency Adjustment
(SSM - User option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
AVL (Auto Volume Leveler)
. . . . . . . . . . . . . . . . . . . . . . . . . . .52
Balance Adjustment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Speaker
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Stereo/Dual Reception
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
NICAM Reception
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Speaker Sound Output Selection
. . . . . . . . . . . . . . . . . .55
TTiimmee MMeennuu
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
On/Off Time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Auto Sleep
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Sleep Timer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
SSppeecciiaall MMeennuu
Child Lock
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
ISM (Image Sticking Minimization)
Method (Option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Low Power (Option)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
XD Demo
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
INSTALLATION
Unfolding The Base Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Basic Connection /
How to Remove the Cable Management
. . . . . . . . . . .12-13
How to join the product assembly to the wall
to protect the set tumbling
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Stand Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
CONNECTIONS & SETUP
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
VCR Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17-18
External Equipment Connections
. . . . . . . . . . . . . . . . . . . . . . . .19
DVD Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
STB(SET-TOP BOX) Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23
PC Setup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24-26
TURNING THE TV ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
SPECIAL FUNCTIONS
PPIIPP ((PPiiccttuurree--IInn--PPiiccttuurree)) // DDoouubbllee WWiinnddooww // PPOOPP
Watching PIP/Double Window/POP
. . . . . . . . . . . . . .28
Programme Selection for Sub Picture
. . . . . . . . . . . .28
Input Source Selection for Sub Picture
. . . . . . . . .29
Sub Picture Size Adjustment (PIP mode only)29
Moving the Sub Picture (PIP mode only) . . .29
Adjusting PIP Transparency (PIP mode only) 29
Swapping between main and sub pictures . . .30
POP
(Picture-out-of-Picture: Programme Scan) . . .30
TTeelleetteexxtt
Teletext Language Selection . . . . . . . . . . . . . .31
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . .31
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . .31
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Special Teletext Functions . . . . . . . . . . . . . . .33
3
CONTENTS
TV MENU
SSccrreeeenn MMeennuu
Auto Configure (RGB [PC] mode only)
. . . . . . . . . . . .63
Manual Configure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Setting the Picture Format . . . . . . . . . . . . . . . . . . . . . .65-66
Selecting Wide VGA/XGA mode . . . . . . . . . . . . . . . . . . .67
Initializing
(Reset to original factory settings) . . . . . . . . . . . . . . . .
67
APPENDIX
Programming the Remote
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
Programming code
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69-70
Troubleshooting Checklist
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
71-72
Maintenance
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
73
Product Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
74-75
4
INTRODUCTION
CONTROLS
INTRODUCTION
This manual explains the features available on the
4422PPCC11RR
*
,
5500PPCC11RR
*
TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
Front Panel Controls
PR
VOL
OK
MENU
INPUT
PROGRAMME Buttons
VOLUME Buttons
MENU Button
OK Button
INPUT Button
POWER Button
PR
VOL
OK
MENU
INPUT
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is
switched on.
PR
VOL
OK
MENU
INPUT
5
INTRODUCTION
This manual explains the features available on the
4422PPCC33RR
*
TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
PR
VOL
OK
MENU
INPUT
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
PROGRAMME Buttons
VOLUME Buttons
OK Button
MENU Button
INPUT Button
POWER Button
<Front Panel >
<Side Panel >
6
INTRODUCTION
CONNECTION OPTION
INTRODUCTION
AC IN
RS-232C IN
(CONTROL
&
SERVICE)
ANTENNA
IN
AV 1 AV 2
AUDIO OUT
VARIABLE
RGB IN
VIDEO
AUDIO
COMPONENT IN
AV IN 4
L/MONO
R
AUDIOAUDIO
VIDEOVIDEO
MONO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RGB
(PC/DTV)(PC/DTV)
AUDIO
(RGB/DVI)
2
1 (DVI)
HDMI INHDMI IN
CONTROL IN
REMOTE
This is the back panel of
4422PPCC11RR
*
,
5500PPCC11RR
*
,
4422PPCC33RR
*
TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
RGB/Audio Input
Connect the monitor output from a PC/DTV to
the appropriate input port.
Variable Audio Output
Connect an external amplifier or add a sub-
woofer to your surround sound system.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
Power Cord Socket
This TV operates on an AC power. The voltage
is indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Remote Control Port
HDMI Input
Connect a HDMI signal to HDMI IN.
Connect DVI(VIDEO) signal to HDMI/DVI port
with DVI to HDMI cable.
RS-232C Input
(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
1
2
3
4
5
6
7
8
9
10
11
4321
7 8 9
10 11
65
(except 42PC3R
*
)
7
INTRODUCTION
CONTROLS
This manual explains the features available on the
3377LLCC22RR
*
,
4422LLCC22RR
*
TVs.
■
This is a simplified representation of a front panel. Here shown may be somewhat different from your TV.
PR
VOL
OK
MENU
INPUT
R
/I
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates white when the set is switched on.
PROGRAMME Buttons
VOLUME Buttons
OK Button
MENU Button
INPUT Button
POWER Button
<Front Panel >
<Side Panel >
8
INTRODUCTION
INTRODUCTION
CONNECTION OPTION
This is the back panel of
3377LLCC22RR
*
,
4422LLCC22RR
*
TVs.
Back Connection Panel
AUDIO Input
Connections are available for listening
stereo sound from an external device.
VIDEO Input
Connects the video signal from a video
device.
AC IN
AV IN 4
AUDIO
AUDIO
VIDEO
VIDEO
L/
MONO
MONO
R
AC IN
AV 1 AV 2
COMPONENT IN
AV IN 3
MONO
( )
RGB
(PC/DTV)
(PC/DTV)
RS-232C IN
(CONTROL
&
SERVICE)
VARIABLE
AUDIO OUT
ANTENNA
IN
HDMI IN
REMOTE
COMTROL
IN
1(DVI)
RGB IN
AUDIO
(RGB/DVI)
VIDEO
S-VIDEO
2
AUDIO
AUDIO
VIDEO
RGB/Audio Input
Connect the monitor output from a PC/DTV
to the appropriate input port.
Variable Audio Output
Connect an external amplifier or add a sub-
woofer to your surround sound system.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an
external device to these jacks.
Power Cord Socket
This TV operates on an AC power. The voltage
is indicated on the Specifications page. Never
attempt to operate the TV on DC power.
Remote Control Port
HDMI Input
Connect a HDMI signal to HDMI IN.
Connect DVI(VIDEO) signal to HDMI/DVI
port with DVI to HDMI cable.
RS-232C Input
(CONTROL&SERVICE)Port
Connect the serial port of the control devices
to the RS-232C jack.
S-Video Input
Connect S-Video out from an S-VIDEO device.
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
Component Input
Connect a component video/audio device to
these jacks.
Antenna Input
10
9
7
8
32
1
6
5
11
1
2
3
4
5
6
7
8
9
10
11
4
REMOTE CONTROL KEY FUNCTIONS
POWER
TV INPUT
INPUT
ARC
Brightness
adjustment
PIP
SIZE
POSITION
PIP PR - /+
SWAP
PIP INPUT
Coloured
buttons
VCR/DVD
control buttons
EXIT
LIST
MENU
I/II
SLEEP
Switches the set on from standby or off to standby.
Returns from
AV 1 , AV 2 , S-Video2, AV 3 , AV 4 (except
42PC3R
*
),
Component, RGB, HDMI1/DVI or
HDMI 2 to the TV mode.
Switches the set on from
standby.
If you press the button once, the input source OSD will
appear on screen as shown. Press the
DD
/
EE
button and then
OOKK
button to select the desired input source (
TV, AV 1 ,
AV 2 , S-Video2, AV 3 , AV 4 (except 42PC3R
*
),
Component, RGB, HDMI1/DVI or HDMI 2).
Selects your desired picture format.
Adjusts screen brightness.
It returns to the default settings brightness by changing
mode source.
Switches the sub picture PIP, DW, POP or off mode.
Adjusts the sub picture size.
Moves the sub picture.
Selects a programme for the sub picture.
Exchanges the main/sub images in PIP/Twin picture mode.
Selects the input source for the sub picture in PIP/Twin
picture mode.
These buttons are used for teletext (only
TTEELLEETTEEXXTT
models) or
PPrrooggrraammmmee eeddiitt
.
Controls some video cassette recorders or DVD players
when you have already selected DVD or VCR mode button.
Clears all on-screen displays and returns to TV viewing
from any menu.
Displays the programme table.
Selects a menu.
Selects the sound output.
Sets the sleep timer.
9
INTRODUCTION
10
INTRODUCTION
REMOTE CONTROL KEY FUNCTIONS
• Open the battery compartment cover on the back side and insert the
batteries with correct polarity.
• Install two 1.5V alkaline batteries of AA type. Don’t mix used batteries
with new batteries.
INSTALLING BATTERIES
INTRODUCTION
OK
INPUT
TVTV
INPUT
PIP PR- PIP PR+
SWAP
PIP INPUT
DVD
ARC
EXIT
VOL
TIME
REVEAL
INDEX
Q.VIEW
MUTE
PR
SLEEP
LIST
I/II
MENU
TEXT PIP SIZE
POSTION
VCR
POWER
123
456
789
*
0
FAV
?
1
1
1
MODE
Selects the remote operating modes.
TELETEXT
BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
THUMBSTICK
(Up/Down/Left
Right)
OK
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
Accepts your selection or displays the current mode.
VOLUME UP
/DOWN
Q.VIEW
MUTE
Programme
UP/DOWN
0~9 number
button
FAV
*
Adjusts the volume.
Returns to the previously viewed programme.
Switches the sound on or off.
Selects available programmes.
Selects a programme.
Selects numbered items in a menu.
Displays the selected favourite programme.
No function
11
INSTALLATION
UNFOLDING THE BASE STAND (42PC1R
*
, 42PC3R
*
)
INSTALLATION
■
This feature is not available for all models.
Figures shown here may be slightly different from your set.
WWhheenn cclloossiinngg tthhee ssttaanndd ffoorr ssttoorraaggee
First remove the screws in the holes (B) on the bottom
of the stand. And then pull two Hooks (D) of the stand bottom
and fold the stand into the back of the set.
After folding, push two Locks (A) of the stand bottom outward.
NOTE
!
■
Place the set with the screen facing down on a cushion or soft cloth as shown in Figure 1.
Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward.
■
Pull the stand out as shown above in Figures 2 ~ 3.
After unfolding the stand, please insert and tighten the screws in the holes (B) on the bottom of the stand.
■
When connecting cables to the set, do not disengage the lock (C).
This may cause the set to fall, causing serious bodily injury and serious damage to the set.
A
D
A
C
B
B
1
3 4
2
12
INSTALLATION
BASIC CONNECTION (42PC1R
*
, 50PC1R
*,
42PC3R
*
)
INSTALLATION
Arrange the cables as shown picture.
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
with both
hands and push it as shown.
Connect the cables as necessary.
To connect an additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss
section.
Reinstall the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
as
shown.
1
2
3
CABLE MANAGEMENT
■
These models have two cable arrangement methods according to the stand type.
Stand type 1
Stand type 2
13
INSTALLATION
BASIC CONNECTION (37LC2R
*
, 42LC2R
*
)
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
with both
hands and pull it upward.
NOTE
!
GG
Do not hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
when moving the product.
If the product is dropped, you may be injured or the product may be broken.
HOW TO REMOVE THE CABLE MANAGEMENT
Connect the cables as necessary.
After connecting the cables neatly, arrange
the cables to the Cable Holder.
To connect an additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss
sec-
tion.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT
as shown.
2
Bundle the cables using the supplied
twister holder.
3
14
INSTALLATION
HOW TO JOIN THE PRODUCT ASSEMBLY TO THE WALL TO
PROTECT THE SET TUMBLING
INSTALLATION
42PC1R
*
, 50PC1R
*
, 42PC3R
*
37LC2R
*
, 42LC2R
*
2
1
■
Set it up close to the wall so the product doesn’t fall over when it is pushed backwards.
■
The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the
product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling
forward and hurting people. It will also prevent the product from damage caused by fall. Please make sure
that children don’t climb on or hang from the product.
3
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is
safer to tie the rope so it becomes horizontal between the wall and the product.
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on
the wall. Match the height of the bracket that is mounted on the wall.
NOTE
!
GG
When moving the product to another place undo the ropes first.
GG
Use a product holder or a cabinet that is big and strong enough for the size and weight of the product.
GG
To use the product safely make sure that the height of the bracket that is mounted on the wall is same as
that of the product.
2
3
1
1
3
2
15
INSTALLATION
STAND INSTALLATION
Desktop Pedestal Installation
4 inches
4 inches4 inches
4 inches
PR
VOL
OK
MENU
INPUT
For proper ventilation, allow a clearance of 4” on each side and from the wall.
Wall Mount: Horizontal installation
4 inches
4 inches
4 inches
4 inches
4 inches
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instruc-
tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
GGRROOUUNNDDIINNGG
Ensure that you connect the earth ground wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate circuit
breaker. Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
Power
Supply
Short-circuit
Breaker
■
The TV can be installed in various ways such as on a wall, or on a desktop etc.
■
The TV is designed to be mounted horizontally.
<<OOnnllyy 4422PPCC11RR
*
,, 4422PPCC33RR
*
>>
Remove two screws of the backside of the set before
installing the wall mounting bracket.
16
CONNECTIONS & SETUP
CONNECTIONS & SETUP
ANTENNA CONNECTION
■
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
■
For optimum picture quality, adjust antenna direction.
■
An antenna cable and converter are not supplied.
■
In poor signal areas, to get better picture quality,
install a signal amplifier to the antenna as shown
to the right.
■
If signal needs to be split for two TVs, use an
antenna signal splitter for connection.
SSiiggnnaall
AAmmpplliiffiieerr
UHF
VHF
ANTENNA
IN
Multi-family Dwellings/Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Outdoor Antenna
Wall Antenna Socket
VHF Antenna
UHF Antenna
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
ANTENNA
IN
ANTENNA
IN
ANTENNA
IN
ANTENNA
IN
17
CONNECTIONS & SETUP
VCR SETUP
■
To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
■
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the
screen may remain visible on the screen.
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
34
OUTPUT
SWITCH
ANT OUT
ANT IN
AC IN
ANTENNA
IN
AV 1 AV 2
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
AV 1 AV 2
ANTENNA
IN
AV IN 4
L/MONO
R
AUDIO
VIDEO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
VIDEO
AUDIO
COMPONENT IN
VARIABLE
AUDIO OUT
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
Connect the
AANNTT OOUUTT
socket of the VCR to the
AANNTTEENNNNAA IINN
socket on the set.
Connect the antenna cable to the
AANNTT IINN
antenna socket of the VCR.
Press the
PPLLAAYY
button on the VCR and match
the appropriate programme between the TV and
VCR for viewing.
VVCC RR
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
34
OUTPUT
SWITCH
ANT OUT
ANT IN
ANTENNA
IN
RGB IN
MONO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
AV 1 AV 2
ANTENNA
IN
AV IN 4
L/MONO
R
AUDIO
VIDEO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
VIDEO
AUDIO
COMPONENT IN
VARIABLE
AUDIO OUT
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL & SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL & SERVICE)
2
1 (DVI)
HDMI IN
VVCC RR
NOTE
!
GG
If you have a mono VCR, connect the audio cable from the VCR to the
AAUUDDIIOO LL//MMOONNOO
jack of
the set.
1
2
1
1
2
3
Connect the
AAUUDDIIOO
/
VVIIDDEEOO
jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV33
input source using the
IINNPPUUTT
button on
the remote control.
- If connected to
AAVV IINN44
, select
AAVV44
input source.
(except 42PC3R
*
)
1
2
3
When connecting with an antenna
When connecting with a RCA cable
18
CONNECTIONS & SETUP
CONNECTIONS & SETUP
VCR SETUP
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
34
OUTPUT
SWITCH
ANT OUT
ANT IN
ANTENNA
IN
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
MONO
( )
AUDIO
VIDEO
S-VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
AV 1 AV 2
ANTENNA
IN
AV IN 4
L/MONO
R
AUDIO
VIDEO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
VIDEO
AUDIO
COMPONENT IN
VARIABLE
AUDIO OUT
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
VVCC RR
GG
If the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to the
S-Video2 mode.
GG
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
ANTENNA
IN
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
AV 1 AV 2
ANTENNA
IN
(R) AUDIO (L)
AUDIO/
VIDEO
AV IN 4
L/MONO
R
AUDIO
VIDEO
( )
AUDIO
VIDEO
S-VIDEO
AV IN 3
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
VIDEO
AUDIO
COMPONENT IN
VARIABLE
AUDIO OUT
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
RGB
(PC/DTV)
2
1 (DVI)
HDMI IN
RS-232C IN
(CONTROL
&
SERVICE)
RGB IN
AV IN 3
RGB
(PC/DTV)
RS-232C IN
(CONTROL
&
SERVICE)
2
1 (DVI)
HDMI IN
VVCC RR
TTVV BBaacckk
NOTE
!
GG
If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.
only the S-Video can be received.
NOTE
!
1
1
2
Connect the Euro scart socket of the VCR to the
AAVV11
Euro scart socket on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV11
input source with using the
IINNPPUUTT
button on
the remote control.
- If connected to
AAVV22
Euro scart socket, select
AAVV22
input source.
1
2
3
Connect the S-VIDEO output of the VCR to the
SS--VViiddeeoo
input on the set. The picture quality is
improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the
AAUUDDIIOO
input jacks on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV33
input source with using the
IINNPPUUTT
button
on the remote control.
1
2
4
3
When connecting with a Euro Scart
When connecting with an S-Video cable
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/